Panasonic Interactive Plasma Display TH 103PB1 Operating Instructions

11
Network Setup
  WIRELESS LAN
You can make detailed wireless LAN settings.
You can con gure settings when the wireless module (ET-WM200U) is mounted.
Setting network number
Select [WIRELESS LAN] in [NETWORK SETUP] menu and press
1  button.
Select the number to be connected for 2[WIRELESS LAN].
[OFF], [S-DIRECT], [M-DIRECT], [S-MAP],•
[1] - [4], [ USER1]-[USER3]
Selecting [OFF] disables the wireless LAN.•
Network number: [S-DIRECT], [S-MAP] and [1]-[4] are available only when connecting via wireless...

12Select [USER1] – [USER3] for [WIRELESS LAN].
1
WIRELESS LAN
SAVE
WIRELESS LAN 
255.255.255.    0
192.168.    0.    1 192.168. 10. 100
USER1
IP ADDRESS
SUBNET MASK
GATEWAY
AD HOCMODE
NAME CHANGE
SSID
DHCPOFF
Address settings
1  Select the item and press .
I192.168.    0.    8IP ADDRESS
2 Use  to select a digit.
3 Use  to change a number.
4 Press.
Pressingwill cancel the address change.
Set [DHCP].2 When "OFF" is selected, IP ADDRESS and other settings can be set manually.
NAME CHANGE
You can...

13
Network Setup
Press  to go to the next item.3 Make the settings related to the wireless connection between the Display and the network.
SSID
10
OPENAUTHENTICATION
ENCRYPTION
CHANNELNONE
AD HOCMODE
SSID:If the mode is [AD HOC], enter the same character string as that of SSID
set on the computer to be connected. I
f the mode is
[INFRASTRUCTURE], enter the SSID registered at the access point.
Entering characters page 15
SSID has to be entered in alphanumeric letters.•
You cannot set “any” or “ANY” for...

14
Network Setup
Press  to go to the next item.4 In addition, further perform the following setting depending on [AUTHENTICATION] and [ENCRYPTION]
settings
.
********
********
********KEY 2
KEY 3
KEY 4KEY 1
1DEFAULT KEY
********
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the 
encryption method:
DEFAULT KEY:Set 1 – 4 numerals for the default key.
KEY1 – 4:Set a WEP key to the key number selected with [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the...

15
Network Setup
   
NAME CHANGE
You can change the Display name to be displayed on the network.
Select [NAME CHANGE] in [NETWORK SETUP] menu and press 1 button.
The keyboard is displayed.
Up to 8 characters can be entered for the Display name.
NAME CHANGE
OK A Name0000
	
B C D E F G H I J K L M ALL DELETE
N O P Q R S T U V W X Y Z DELETE
SPACE abcde f gh i j k lm
nopq r s t uvwx y z
0123456789
!”#$%&’ +–/=?
_ ` | ~ ( ) [ ] { } ,@\ ˆ
.;:
CANCEL
1 select
2 set
[Entering characters]
To enter text, select...

16
Network Setup
PAS S W O R D
Set to [ON] to perform password check when connecting with the Display using “Wireless Manager”.
By controlling connection with password setting, it is possible to prevent an external device from accidentally
connecting and interrupting images, etc.
Select [PASSWORD] in [NETWORK SETUP] menu and press1button.
PASSWORD
PASSWORDOFFPASSWORD CHANGE
Select [ON] or [OFF] for [PASSWORD].2
PASSWORD CHANGE
Password can be registered or changed. No password is set in the default...

17
Network Setup
LIVE MODE CUT IN
Set this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the
“Wireless Manager”. For details, refer to “Wireless Manager” operating manual.
Select [LIVE MODE CUT IN] in [NETWORK SETUP] menu and press 1button.
Select [ON] or [OFF].
2 
CONTROL I/F SELECT
Set whether to control with RS-232C (serial) or LAN. When [LAN] is set, the slot power is turned on, and power 
indicator is lit orange under the condition o
f power...

18
Connecting with Wired LAN
You can con gure settings when the wireless module (ET-WM200U) is mounted.
To use the network function, make the necessary settings in [NETWORK SETUP] and be sure to set [CONTROL 
I
/F SELECT] to [LAN]. (See page 9)
When [LAN] is set, the slot power is turned on, and power indicator is lit orange under the condition of power off 
with remote control 
(stand-by state), regardless of the [Slot power] setting.
Computer operation
Connection can be made with wired LAN. However,...

19
Using Web Browser
  Accessing from the Web browser
Activate the Web browser in the personal computer.1 
Enter the IP address set by the Display into the URL input  eld of the Web browser.2
Enter your “User name” and “Password”.3
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for 
the user name and Panasonic 
for the password.
Click [OK] to display the Display status 4page.
“Display status” page is displayed.
Avoid activating two or more Web browser...

20
Using Web Browser
   
Display status page
Click [Status], then [Display status] to display the Status information page.
This page displays the Display statuses established for the items shown below.
1 Displays the type of Display.
2 Displays the  rmware version of the Display main
unit.
3  Displays the  rmware version of the network.
3 2 
1 
Description of each item 
1 Page tab
  Click these to switch pages.
2 Status
Click this item, and the status of the Display is 
displayed.
3  Display control...