Panasonic Interactive Plasma Display TH 103PB1 Operating Instructions

							11
Network Setup
  WIRELESS LAN
You can make detailed wireless LAN settings.
You can con gure settings when the wireless module (ET-WM200U) is mounted.
Setting network number
Select [WIRELESS LAN] in [NETWORK SETUP] menu and press
1  button.
Select the number to be connected for 2[WIRELESS LAN].
[OFF], [S-DIRECT], [M-DIRECT], [S-MAP],•
[1] - [4], [ USER1]-[USER3]
Selecting [OFF] disables the wireless LAN.•
Network number: [S-DIRECT], [S-MAP] and [1]-[4] are available only when connecting via wireless LAN with the • 
application software the “Wireless Manager”. [S-MAP] is for showing connectable displays on the network according 
to their levels of radio wave intensity. For details, refer to the operation manual of the “Wireless Manager”.
[M-DIRECT] and [S-DIRECT] are not supported in “Wireless Manager mobile edition 5.5”.• 
WIRELESS LAN
SAVE
WIRELESS LANOFF
[WIRELESS LAN].
Con guration of WIRELESS LAN [M-DIRECT]
Even if there is no access point, you can still connect the Display to computer via the infrastructure. In addition, the 
connection with the iPad / iPhone / iPod touch is much easier.
For more information, see the website below.
http://panasonic.net/prodisplays/download/software/index.html
Select [M-DIRECT] for [WIRELESS LAN].1 
WIRELESS LAN
SAVE
WIRELESS LAN 
255.255.255.    0 192.168. 10. 100
M-DIRECT
IP ADDRESS
SUBNET MASK
1CHANNEL
********KEY
SSID
Address settings
1   Select the item and press .
I192.168.    0.    8IP ADDRESS
2 Use  to select a digit.
3 Use  to change a number.
4 Press.
Pressingwill cancel the address change.
Press  to go to the next item.2 
IP ADDRESS
(Displaying and setting the IP 
address)
Enter the IP address.
SUBNET MASK
(Displaying and setting the 
SUBNET MASK
)
Enter the subnet mask.
SSID Select [M-DIRECT] in [WIRELESS LAN], then the SSID can be set.Entering characterspage 15
CHANNEL
Select [M-DIRECT] in [WIRELESS LAN], then the CHANNEL can be 
set
.
Select a channel for the access point ( page 6).
KEY
Select [M-DIRECT] in [WIRELESS LAN], then the KEY can be set.
Setting a key for the access point. Input either 8 to 63 alphanumerics or 
a 64 digit string in the hexadecimal format. 
						

							12Select [USER1] – [USER3] for [WIRELESS LAN].
1
WIRELESS LAN
SAVE
WIRELESS LAN 
255.255.255.    0
192.168.    0.    1 192.168. 10. 100
USER1
IP ADDRESS
SUBNET MASK
GATEWAY
AD HOCMODE
NAME CHANGE
SSID
DHCPOFF
Address settings
1  Select the item and press .
I192.168.    0.    8IP ADDRESS
2 Use  to select a digit.
3 Use  to change a number.
4 Press.
Pressingwill cancel the address change.
Set [DHCP].2 When "OFF" is selected, IP ADDRESS and other settings can be set manually.
NAME CHANGE
You can change the user name. Entering characterspage 15
DHCP
(DHCP client function)
ON:If a DHCP server exists in the network to which the display is 
connected, the IP address will automatically be acquired.
OFF:If a DHCP server does not exist in the network to which 
the displa
y is connected, additionally set [IP ADDRESS],
[SUBNET MASK] and [DEFAULT GAT E WAY ] .
IP ADDRESS
(Display of IP address and setting)Enter the IP address if DHCP server is not used.
SUBNET MASK
(Displaying and setting the subnet 
mask
)
If not using a DHCP server, enter the subnet mask.
GATEWAY
(Display of gateway address and
setting
)
Enter the gateway address if DHCP server is not used.
If [DHCP] is set to [ON], the IP address and other items are not displayed. Check the [STAT US] page for the •
current IP address and other items. (See page 17)
Before using the DHCP server, make sure the DHCP server is already functioning.•
For details of IP address, subnet mask, and gateway, ask the network administrator.•
A wired LAN and wireless LAN cannot be used in the same segment.•
Network Setup
Select [SAVE] and press3 button.
Save the current network settings.
Default settings of [M-DIRECT]
The following settings as [M-DIRECT] in the [WIRELESS LAN] are set before the Display leaves the 
factory.
IP ADDRESS192.168.11.100
SUBNET MASK255.255.255.0
SSIDM-DIRECT + The last 4 digits of the Display ID
CHANNEL
1
KEYThe same string as the SSID
The authentication method is WPA2-PSK, and the encryption method is AES. Both methods are  xed.•
When you need to change initial con guration of [M-DIRECT], please contact your network administrator.•
Make sure the initial Key is changed for safety.•
As the DHCP server is already functioning, select [ON] before connecting a computer.•
Con guration of WIRELESS LAN [USER1] - [USER3] 
						

							13
Network Setup
Press  to go to the next item.3 Make the settings related to the wireless connection between the Display and the network.
SSID
10
OPENAUTHENTICATION
ENCRYPTION
CHANNELNONE
AD HOCMODE
SSID:If the mode is [AD HOC], enter the same character string as that of SSID
set on the computer to be connected. I
f the mode is
[INFRASTRUCTURE], enter the SSID registered at the access point.
Entering characters page 15
SSID has to be entered in alphanumeric letters.•
You cannot set “any” or “ANY” for SSID.• 
MODE
AD HOC:Connect Display and computer directly without access point.
INFRA
STRUCTURE:Connect through access point.
AUTHENTICATION:Set the user authentication method used by the network to be connected.
OPE
N:Select when making a connection using [AD HOC], or when the access
point authentication method is 
OpenSystem.
SHARED:Select when making a connection using [AD HOC], or when the access
point authentication method is Shared Key
.
WPA-PSK 
WPA2-PSK 
WPA-EAP/
WPA2-EAP
WPA-EAP
WPA2-EAP
: Available when the mode is set to [INFRASTRUCTURE]. 
ENCRYPTION:Select the encryption method to be used for communication between the
Display and the network.
N
ONE:Select when transmit without encryption. It is selectable only when 
[AUTHENTICAT ION] is [OPEN] or [SHARED].
WEP
:Select when ENCRYPTION is WEP.
TKIP:Select when ENCRYPTION is TKIP.
Selectable when [AUTHENTICAT ION] is either [WPA-PSK], [WPA2-PSK],  
[WPA-EAP], [WPA2-EAP].
AE
S:Select when ENCRYPTION is AES.
Selectable when [AUTHENTICAT ION] is either [WPA-PSK], [WPA2-PSK],  
[WPA-EAP], [WPA2-EAP].
CHANNEL:Refer to page 6 for usable channels.
Important video/audio data is protected because AES encryption programming takes place in advance for 
all network numbers, even i
f [ENCRYPTION] is set to [NONE]. 
						

							14
Network Setup
Press  to go to the next item.4 In addition, further perform the following setting depending on [AUTHENTICATION] and [ENCRYPTION]
settings
.
********
********
********KEY 2
KEY 3
KEY 4KEY 1
1DEFAULT KEY
********
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the 
encryption method:
DEFAULT KEY:Set 1 – 4 numerals for the default key.
KEY1 – 4:Set a WEP key to the key number selected with [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input  ve 
alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input
13 alphanumerics 
(or a 26-digit string for the hexadecimal format).
When using [WPA-PSK] or [WPA2-PSK] :
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
Set [EAP], [USER NAME], and [PASSWORD].
EAP:Select the EAP setup in the RADIUS server. Types of EAP that can be selected are as 
follows.
PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5),
EAP-TTLS (MS-CHAPv2), EAP-FAST(MS-CHAPv2), EAP-FAST(GTC), EAP-TLS
USER NAME:Input a user name used for authentication (excluding spaces)(maximum 64 characters).
PASSWORD:Input a password used for authentication (maximum 64 characters).
Entering characters page 15
:  When [EAP-TLS] is selected as EAP, it is required to setup “USER NAME”, “PASSWORD”, “DIGITAL 
CERTIFICATE”, and “CA CERTIFICATE” with the WEB browser. (See page 24 – 25)
If you are unable to connect to the wireless LAN through the access point, contact the manufacturer of •
the access point.
When using EAP, the display needs to be set according to the setting of the RADIUS server. Check with• 
the network administrator for the setting of the RADIUS server.
When usin
g an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or • 
WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-
EAP/WPA2-EAP.
Select [SAVE] and press5 button.
Save the current network settings.
Default settings of [USER1] – [USER3]
The following settings as [USER1] – [USER3] in the [WIRELESS LAN] are set before the Display leaves 
the 
factory.
SSID Panasonic DisplayMODE AD HOC
DHCPOFFAUTHENTICAT IONOPEN
IP ADDRE
SS192.168.11.10 0ENCRYPTIONNONE
SUBNET MASK255.255.255.0CHANNEL11
GAT E WAY 192.168.11.1 
						

							15
Network Setup
   
NAME CHANGE
You can change the Display name to be displayed on the network.
Select [NAME CHANGE] in [NETWORK SETUP] menu and press 1 button.
The keyboard is displayed.
Up to 8 characters can be entered for the Display name.
NAME CHANGE
OK A Name0000
	
B C D E F G H I J K L M ALL DELETE
N O P Q R S T U V W X Y Z DELETE
SPACE abcde f gh i j k lm
nopq r s t uvwx y z
0123456789
!”#$%&’ +–/=?
_ ` | ~ ( ) [ ] { } ,@\ ˆ
.;:
CANCEL
1 select
2 set
[Entering characters]
To enter text, select characters in the on-screen keyboard.
Example: Specifying “PDP 01”
1  Select “ALL DELETE”. 
Name0000	
All text is deleted.
To delete individual characters, select 
“DELETE”.
2  Select “P”. 
P	
Repeat this process to enter the next character. 
3  Select “D” and “P”.
PDP	
4  Select “SPACE”. 
PDP   	
5  Select “0” and “1”. 
PDP  01	
When you  nished entering the Display name, select [OK] and press2 .
To cancel saving the Display name, select [CANCEL]. 
						

							16
Network Setup
PAS S W O R D
Set to [ON] to perform password check when connecting with the Display using “Wireless Manager”.
By controlling connection with password setting, it is possible to prevent an external device from accidentally
connecting and interrupting images, etc.
Select [PASSWORD] in [NETWORK SETUP] menu and press1button.
PASSWORD
PASSWORDOFFPASSWORD CHANGE
Select [ON] or [OFF] for [PASSWORD].2
PASSWORD CHANGE
Password can be registered or changed. No password is set in the default setting.
Select [PASSWORD CHANGE] and press 1 button.
The keyboard is displayed.
Up to 8 characters can be entered for the password.
Enterin
g characters page 15
When you  nished entering the password, select [OK] and press 2.
To cancel saving the password, select [CANCEL].
It is recommended to change password on a regular basis for keeping it private.
COMPUTER SEARCH
You can search computers that can connect using the “Wireless Manager”. See the “Wireless Manager” operation 
manual for details.
* You can con gure settings when the wireless module (ET-WM200U) is mounted.
Select [COMPUTER SEARCH] in [NETWORK SETUP] menu and press 1button.
The list of connectable computers on the network is displayed.
COMPUTER SEARCH
1.        Name001
2.        Name002
SEARCH COMPLETE.
Select the computer to be connected and press 2.
[COMPUTER SEARCH] is not supported in “Wireless Manager mobile edition 6.0”.
MULTI-LIVE
Switch to the MULTI-LIVE mode when using the “Wireless Manager”. See the “Wireless Manager” operation
manual for details.
Select [MULTI-LIVE] in [NETWORK SETUP] menu and pressbutton. 
						

							17
Network Setup
LIVE MODE CUT IN
Set this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the
“Wireless Manager”. For details, refer to “Wireless Manager” operating manual.
Select [LIVE MODE CUT IN] in [NETWORK SETUP] menu and press 1button.
Select [ON] or [OFF].
2 
CONTROL I/F SELECT
Set whether to control with RS-232C (serial) or LAN. When [LAN] is set, the slot power is turned on, and power 
indicator is lit orange under the condition o
f power off with remote control (stand-by state), regardless of the [Slot
power] setting.
Select [CONTROL I/F SELECT] in [NETWORK SETUP] menu and press 1button.
Select [RS-232C] or [LAN].2 
RESET
You can reset the network setting to the factory default of the Display.
Select [RESET] in [NETWORK SETUP] menu and press 1button.
NETWORK SETUP
OKCANCEL
RESET
Select [OK] and press 2 .
It takes some time to restart network while the network settings are initialized.
Durin
g that time, “NETWORK SETUP” in the “SETUP” menu is grayed out and cannot be set.
STATUS
Displays the current network status.
Select [STATUS] in [NETWORK SETUP] menu and press button.
The Display information, settings of wired LAN and wireless LAN are displayed.
WEB CONTROL
Select [ON] to control the display from the web browser. When [ON] is set, the slot power is turned on, and power 
indicator is lit orange under the condition o
f power off with remote control (stand-by state), regardless of the [Slot
power] setting.
Select [WEB CONTROL] in [NETWORK SETUP] menu and press 1 button.
Select [ON] or [OFF].2 
						

							18
Connecting with Wired LAN
You can con gure settings when the wireless module (ET-WM200U) is mounted.
To use the network function, make the necessary settings in [NETWORK SETUP] and be sure to set [CONTROL 
I
/F SELECT] to [LAN]. (See page 9)
When [LAN] is set, the slot power is turned on, and power indicator is lit orange under the condition of power off 
with remote control 
(stand-by state), regardless of the [Slot power] setting.
Computer operation
Connection can be made with wired LAN. However, con rm to your system administrator on network settings 
before changing any settings.
Turn on the computer.1 
Make the network setting according to your system administrator.2If the Display settings are the default settings (See page10), the computer can be used with the following 
networ
k settings.
IP ADDRESS192.168.10.101
SUBNET MASK255.255.255.0
GAT E WAY 192.168.10.1
Computer operation
Make the network setting according to your system administrator.1If you select [M-DIRECT] for [WIRELESS LAN] in the [NETWORK SETUP] menu, the IP address will • 
automatically be acquired.
If you select default settings of [USER1] - [USER3] for [WIRELESS LAN] in the [NETWORK SETUP]• 
menu (see page 14), then the computer can be used with the following network settings.
I P  A D D R E S S 1 9 2 .1 6 8 .11.1 01
SUBNET MASK255.255.255.0
GAT E WAY 192.168.11.1
Click [Start][Connect To2 ][Wireless Network Connection], select the wireless
network of [SSID] set with the Displa
y, and then click [Connect].
When you select default settings of [M-DIRECT] for [WIRELESS LAN] in the [NETWORK SETUP] menu, 
the SSID is [M-DIRECT + The last 4 di
gits of the Display ID].
When you select default settings of [USER1] - [USER3] for [WIRELESS LAN] in the [NETWORK SETUP]
menu, the 
SSID is [Panasonic Display].
The names are for Windows XP. In Windows Vista/Windows 7, the procedure will be [Start]
[Connect To]. The 
names may differ depending on the Operating System. Please connect the network according to the displayed 
names on your computer.
If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation€ 
procedure for connection.
If you use the access point, con gure the Display and each network setting of the computer following the €
instruction of the network administrator.
  Connecting with Wireless LAN 
						

							19
Using Web Browser
  Accessing from the Web browser
Activate the Web browser in the personal computer.1 
Enter the IP address set by the Display into the URL input  eld of the Web browser.2
Enter your “User name” and “Password”.3
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for 
the user name and Panasonic 
for the password.
Click [OK] to display the Display status 4page.
“Display status” page is displayed.
Avoid activating two or more Web browser simultaneously to work out setting or control actions.•
Change the password  rst of all.•
Administrator privileges enable the use of all functions. User privileges enable the use of only “Display status”, •
“Network status”, “Basic control”, “Advanced control”, and “Change password”.
If the password is incorrectly entered three times in a row, the lock is set for several minutes.•
If you want to control the Display using a Web browser, set [WEB CONTROL] in [NETWORK SETUP] menu to•
[ON]. 
						

							20
Using Web Browser
   
Display status page
Click [Status], then [Display status] to display the Status information page.
This page displays the Display statuses established for the items shown below.
1 Displays the type of Display.
2 Displays the  rmware version of the Display main
unit.
3  Displays the  rmware version of the network.
3 2 
1 
Description of each item 
1 Page tab
  Click these to switch pages.
2 Status
Click this item, and the status of the Display is 
displayed.
3  Display control
Click this item to display the Display control page.
4  Detailed set up
Click this item to display the advanced settings
page.
5 Change password
1 
2 
3 
4 
5