Panasonic Interactive Plasma Display TH 103PB1 Operating Instructions

TH-103PB1U
Model No.MdlN
Operating Instructions
Network Operations
Interactive Plasma Display
EnglishBefore connecting, operating or adjusting this product,please read these instructions completely.
Please keep this manual for future reference. 

2
Contents
Request Regarding Security·············································3
What you can do · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·4
Notes on Using Wireless Connection·····································
·5
Check 
your computer · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·7
Necessary environment for computers to be connected································7
Connection · ·...

3
Request Regarding Security
When using this product, security breaches of the type described below are conceivable.
Leakage of your private information via this product•
Illegal operation of this product by a malicious third-party•
Harm to or cessation of operation of this product by a malicious third-party•
Be sure to implement suf cient security measures.
Set passwords, and limit the users that are permitted login access.•
Make sure the password is as hard to guess as possible.•
Change the password...

4
What you can do
This unit supports wired LAN and wireless LAN enabling the network functions as below.
 (See page19)
The following operations are possible when using WebBrowser.
Setting and adjusting the Display•
Displaying the Display status•
 (See page27)
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol 
is used.
Setting the Displa
y•
Querying the Display status•

Network function of the unit can control the unit in the same way as serial...

5
Notes on Using Wireless Connection
Wireless connection function of the Display uses radio waves in the 2.4 GHz band.
A radio station license is not required, but be sure to read and fully understand the following items before use.
The wireless module (part number: ET-WM200U) sold separately needs to be mounted when using the wireless LAN function
with the Displa
y.
Do not use near other wireless equipment.
The following equipment may use radio waves in the same band as the Display.
When the Display is...

6
Notes on Using Wireless Connection
Wired LAN
Use straight or crossover LAN cable that is compatible with category 5 or above.
Whether straight cable, crossover cable or both can be used varies depending on the system configuration. For details, 
consult your system administrator.
Available wireless LAN channels
  The channels (frequency range) that can be used differ according to the country or region. Refer to the table below.
Country or region Standard Channels usedFrequency band(Center...

7
Check your computer
  Necessary environment for computers to be connected
First, check your computer to see whether or not it has a wired LAN•or a built-in wireless LAN function.
Before connecting the Display to the computer, be sure to check the following settings.•
Operation is not guaranteed for all wireless LAN adapters and built-in wireless LAN adapters.•
Wired LAN
Check 1 For LAN cable
Is the cable properly connected?•
Use LAN cable that is compatible with category 5 or above.•
Check 2 Wired LAN...

8
Connection
Example of Network Connection (Wired LAN)
Connecting Wireless Module (Wireless LAN)
To use the wireless function, the wireless module (ET-WM200U) (sold separately) is necessary.
When connecting the wireless module to the
display, remove the protective 
 lm and cap.
Connectin
g procedure
Hold the wireless module with its LED on the near side and
connect it to the wireless module connection terminal.
Do not connect any other device than the wireless module 
(ET-WM200U).
ET-WM200
LED
Display...

9
Network Setup
Make the various settings to use the network function.
For network settings, contact your network administrator.
Displaying the NETWORK SETUP menu
Press 1  to display [SETUP] menu. 
MULTI DISPLAY SETUP
ON/OFF TIMER SET UP
DAY/TIME SETUP
NETWORK SETUP
DISPLAY ORIENTATION
LANDSCAPE PORTRAIT SETUP
2/2 SETUP
Select [NETWORK SETUP] with the  and press2button.
The [NETWORK SETUP] menu appears.
NETWORK SETUP
WIRED LAN
PASSWORD
WIRELESS LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVE
LIVE MODE CUT...

10
Network Setup
  WIRED LAN
You can make detailed wired LAN settings.
Select [WIRED LAN] in [NETWORK SETUP] menu and press 1button.
Set [DHCP]
.2 When [OFF] is selected, IP ADDRESS and other settings can be set manually.
DHCP
(DHCP client function)
ON:If a DHCP server exists in the network to which the display 
is connected, the IP address will automatically be acquired.
OFF:If a DHCP server does not exist in the network to which
the displa
y is connected, additionally set [IP ADDRESS], 
[SUBNET MASK]...