Panasonic Integrated Telephone System Kx Tsc11 Operating Instructions

 
11  
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
LCD Contrast 
You can select the LCD contrast level from 1 to 4 by programming. 
Your phone comes from the factory set to 2. 
Make sure that the handset is on the cradle. 
1
 
Press  
[FUNCTION/EXIT] 
. 
2
 
Scroll to “ 
LCD CONTRAST ? 
” by 
pressing  
[] 
 or  
[] 
. 
3
 
Press  
[ENTER] 
. 
• The current setting is displayed. 
4
 
Select the desired contrast by pressing  
[] 
 or  
[] 
. 
• Each time you press  
[] 
 or  
[] 
,...

 
Settings 
12 
Caller ID Number Auto Edit  
Once you call back an edited number (p. 19), this unit can automatically 
edit incoming phone numbers from the same area code in the Caller List 
and each time you receive a call. For example, it can ignore the area code 
of calls originating from your area code, so that you can call these numbers 
from the Caller List without dialing the area code. 
To activate this feature, 
 you must edit a caller’s phone number in the 
Caller List (p. 19) by selecting...

 
13  
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
Voice Mail Tone 
If your voice mail service sends a voice mail tone after a new message has 
finished recording, set to “ON”. “ ” icon will flash on the display if a 
message was recorded in your mailbox. You will hear a series of voice mail 
tones then a dial tone after lifting the handset.
(Contact your service provider about your service.)
Set to “OFF” when:
—you do not subscribe to a voice mail service.
—your voice mail service...

 
Settings 
14 
Display Language 
You can select “English”, “French” or “Spanish” as the display language. 
Your phone comes from the factory set to “English”. 
Make sure that the handset is on the cradle. 
1
 
Press  
[FUNCTION/EXIT] 
. 
2
 
Scroll to “ 
CHANGE LANGUAGE? 
” by 
pressing  
[] 
 or  
[] 
. 
3
 
Press  
[ENTER] 
. 
4
 
Select “ 
ENGLISH 
”, “ 
FRANCAIS 
” or 
“ 
ESPANOL 
” by pressing  
[] 
 or  
[] 
. 
5
 
Press  
[ENTER] 
. 
• The display will return to step 2. 
To exit the programming...

 
15 
Basic Operation
 
For assistance, please call: 1-800-211-PANA(7262) 
Making Calls 
To make a call, this unit can dial up by 2 methods as below steps. 
1
 
Enter a phone number, then lift the handset.
OR
Lift the handset, then dial a phone number. 
• The dialed number is displayed.
• After a few seconds, the display will show 
the length of the call.
• If you misdial, hang up and start again 
from step 1. 
2
 
When finished talking, hang up. 
To redial the last number dialed 
Lift the handset  press...

 16 Answering Calls 
When a call is received, the unit rings, “
 
INCOMING CALL
 
” is displayed. 
If you subscribe to a Caller ID service, the calling party’s information will be 
displayed when the unit is ringing (see below). 
1
 
When the unit rings, lift the handset. 
2
 
When finished talking, hang up. 
• When the ringer volume is set to OFF (p. 11), the unit will not ring. Caller ID Service 
This unit is compatible with a Caller ID service offered by your telephone 
company. If you subscribe to a...

 
17 
Basic Operation
 
For assistance, please call: 1-800-211-PANA(7262) 
• Caller information will not be displayed in the following cases:
— If the caller dialed from an area which does not provide a Caller ID service, the 
display will show “ 
OUT OF AREA 
”.
— If the caller has requested not to display his/her information, the display will 
show “ 
PRIVATE CALLER 
”.
— If a long distance call is identified and caller’s name and/or number cannot be 
received, the display will show “ 
LONG DISTANCE...

 
Using the Caller List 
18 
Ex. When you search from the most recent call: 
** If you receive a call from one of the same phone numbers stored in the Phone 
Book List, the caller’s name will be displayed  
(Private name display) 
.
To see the phone number, press  
[] 
. 
  
Each time you press  
[] 
, the display will 
change alternately. 
Display meaning:
 
SMITH,JOHN
x4
The number of times 
the same caller 
called (up to 9). The time and date the call has 
been received.
(ex. November 23, 10:50 AM)...

 
19 
Basic Operation
 
For assistance, please call: 1-800-211-PANA(7262) 
Calling Back from the Caller List 
1
 
Press  
[] 
 or  
[] 
 to enter the Caller List. 
2
 
Scroll to the desired caller by pressing  
[] 
 or  
[] 
. 
• To exit the Caller List, press  
[FUNCTION/
EXIT] 
 or wait for 60 seconds. 
3
 
Lift the handset. 
• The displayed phone number is dialed 
automatically.
• After a few seconds, the display will show 
the length of the call.
• In some cases, you may have to edit the number...

 
Using the Caller List 
20 
5
 
After editing, you can continue with calling back or storing 
procedures.  
• To call back, lift the handset. 
• To store the number in the Phone book memory, follow steps 4 to 5 on 
page 20 to complete the operation.
• If Caller ID Number Auto Edit is turned on (factory preset is on), phone 
numbers with the same area code as the number you edited will now be 
updated in the Caller List and each time you receive a call.
• 
To save the edited number into the Phone Book,...