Home
>
Panasonic
>
Camera Accessories
>
Panasonic Indoor Pan Tilt Head Aw Ph360n Operating Instructions
Panasonic Indoor Pan Tilt Head Aw Ph360n Operating Instructions
Have a look at the manual Panasonic Indoor Pan Tilt Head Aw Ph360n Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
- 31 - Connections 5When the camera and pan/tilt head are to be controlled by the AW-RP505 control panel for transmitting component signals • Use the supplied camera cable to connect the unit with the convertible camera. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the analog/IEEE1394 card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the multiport hub’s PAN/TILT CONTROL OUT connector. • Use a coaxial cable (BELDEN 8281) to connect the unit’s CAMERA CONTROL IN connector with the multiport hub’s CAMERA CONTROL OUT connector. • Use a 10BASE-T straight cable (UTP category 5) to connect the multiport hub’s PAN/TILT CONTROL IN connector with the controller’s PAN/TILT CONTROL OUT connector. • Use a coaxial cable (BELDEN 8281) to connect the multiport hub’s CAMERA CONTROL IN connector with the controller’s CAMERA CONTROL OUT connector. • Use coaxial cables to connect the unit’s Y OUT connector, Pr/SDI OUT connector and Pb OUT connector with the component input connectors on the color monitor. • Check that the pan/tilt head and camera can be controlled by the controller. • Transmitting component signals over a long distance requires a separate cable compensation unit. Multiport hub: AW-HB505 AC adapter: AW-PS300AColor monitor Camera cable (supplied) 10BASE-T (equivalent to UTP category 5) straight cable, max. 33 ft. (10 m) 10BASE-T (equivalent to UTP category 5) straight cable, max. 1640 ft. (500 m) Coaxial cable (BELDEN 8281), max. 1640 ft. (500 m ) Coaxial cable (BELDEN 8281), max. 33 ft. (10 m ) Coaxial cable Genlock signals must be supplied if a multiple number of cameras and pan/tilt heads are to be used. Multi hybrid control panel:AW-RP505 DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 32 - Connections 6When the camera and pan/tilt head are to be controlled by the AW-RP505 control panel for transmitting SDI signals • Use the supplied camera cable to connect the unit with the convertible camera containing the plugged-in SDI card (such as the AW-PB504N). • Use a coaxial cable to connect the SDI card’s SDI OUT connector with the unit’s SDI IN connector. Adjust the cable to a length at which the pan/tilt head will move smoothly. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the SDI card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the multiport hub’s PAN/TILT CONTROL OUT connector. • Use a coaxial cable (BELDEN 8281) to connect the unit’s CAMERA CONTROL IN connector with the multiport hub’s CAMERA CONTROL OUT connector. • Use a 10BASE-T straight cable (UTP category 5) to connect the multiport hub’s PAN/TILT CONTROL IN connector with the controller’s PAN/TILT CONTROL OUT connector. • Use a coaxial cable (BELDEN 8281) to connect the multiport hub’s CAMERA CONTROL IN connector with the controller’s CAMERA CONTROL OUT connector. • Use a coaxial cable to connect the unit’s Pr/SDI OUT connector with the color monitor’s SDI input connector. • Check that the pan/tilt head and camera can be controlled by the controller. Genlock signals must be supplied if a multiple number of cameras and pan/tilt heads are to be used. Multiport hub: AW-HB505 AC adapter: AW-PS300AColor monitor Coaxial cable (BELDEN 8281), max. 666 ft. (200 m ) 10BASE-T (equivalent to UTP category 5) straight cable, max. 1640 ft. (500 m) Coaxial cable (BELDEN 8281), max. 1640 ft. (500 m ) Coaxial cable (BELDEN 8281), max. 33 ft. (10 m ) 10BASE-T (equivalent to UTP category 5) straight cable, max. 33 ft. (10 m) Camera cable (supplied) Coaxial cable Multi hybrid control panel:AW-RP505 DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 33 - Connections 7When the camera and pan/tilt head are to be controlled by the AW-RP605A multi-function controller for transmitting composite or component signals • Use the supplied camera cable to connect the unit with the convertible camera. • Set controller selection switch SW1 to the left side (RP605), and select the transmission signal selection setting that supports the analog/IEEE1394 card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the controller’s CONTROL OUT TO PAN/TILT HEAD connector. • Use a coaxial cable (BELDEN 8281) to connect the unit’s VIDEO OUT connector with the controller’s VIDEO/Y IN connector (when composite signals are to be transmitted). • Use a coaxial cable (BELDEN 8281) to connect the unit’s Y OUT connector, Pr/SDI OUT connector and Pb OUT connector with the controller’s VIDEO/Y IN connector, Pr IN connector and Pb IN connector (when component signals are to be transmitted). • Use a coaxial cable to connect the controller’s VIDEO/Y OUT connector, Pr OUT connector and Pb OUT connector with the color monitor’s VIDEO input connector or component input connectors. • Check that the pan/tilt head and camera can be controlled by the controller. Multi-function controller:AW-RP605A AC adapter: AW-PS300AColor monitor Camera cable (supplied) Coaxial cable (BELDEN 8281), max. 3333 ft. (1000 m ) 10BASE-T (equivalent to UTP category 5) straight cable, max. 3333 ft. (1000 m)Coaxial cable Genlock signals must be supplied if a multiple number of cameras and pan/tilt heads are to be used. DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 34 - Connections 8When the camera and pan/tilt head are to be controlled by the AW-RP605A multi-function controller for transmitting SDI signals • Use the supplied camera cable to connect the unit with the convertible camera containing the plugged-in SDI card (such as the AW-PB504N). • Use a coaxial cable to connect the SDI card’s SDI OUT connector with the unit’s SDI IN connector. Adjust the cable to a length at which the pan/tilt head will move smoothly. • Set controller selection switch SW1 to the left side (RP605), and select the transmission signal selection setting that supports the SDI card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the controller’s CONTROL OUT TO PAN/TILT HEAD connector. • Use a coaxial cable to connect the unit’s Pr/SDI OUT connector with the color monitor’s SDI input connector. • Check that the pan/tilt head and camera can be controlled by the controller. Multi-function controller:AW-RP605A AC adapter: AW-PS300AColor monitor Coaxial cable (BELDEN 8281), max. 666 ft. (200 m ) Coaxial cable (BELDEN 8281), max. 3333 ft. (1000 m ) 10BASE-T (equivalent to UTP category 5) straight cable, max. 3333 ft. (1000 m) Genlock signals must be supplied if a multiple number of cameras and pan/tilt heads are to be used. Camera cable (supplied) Coaxial cable DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 35 - Connections 9When the pan/tilt head is to be controlled by the AW-RP400 pan/tilt head control panel for transmitting composite or component signals (and the AW-CB400 remote operation panel is used to control the camera) • Use the supplied camera cable to connect the unit with the convertible camera. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the analog/IEEE1394 card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the controller’s CONTROL OUT TO PAN/TILT HEAD connector. • Use a coaxial cable (BELDEN 8281) to connect the unit’s VIDEO OUT connector with the cable compensation unit’s Y VIDEO IN connector (when composite signals are to be transmitted). • Use a coaxial cable (BELDEN 8281) to connect the unit’s Y OUT connector, Pr/SDI OUT connector and Pb OUT connector with the cable compensation unit’s Y VIDEO IN connector, PR C IN connector and PB IN connector (when component signals are to be transmitted). • Use a coaxial cable to connect the cable compensation unit’s Y VIDEO IN connector, PR C IN connector and PB IN connector with the color monitor’s VIDEO input connector or component input connectors. • Use the cable supplied with the remote operation panel to connect the controller’s CAMERA CONTROL IN FROM ROP connector with the remote operation panel’s CONTROL OUT TO CONTROL PANEL connector. • Check that the pan/tilt head and camera can be controlled by the controller. Cable compensation unit: AW-RC400 AC adapter: AW-PS300A Color monitor Camera cable (supplied) 10BASE-T (equivalent to UTP category 5) straight cable, max. 1640 ft. (500 m) Coaxial cable (BELDEN 8281), max. 1640 ft. (500 m ) Coaxial cable Genlock signals must be supplied if a multiple number of cameras and pan/tilt heads are to be used. Pan/tilt control panel: AW-RP400 Remote operation panel: AW-CB400Cable supplied with AW-CB400 DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 36 - Connections :When the pan/tilt head is to be controlled by the AW-RP400 pan/tilt head control panel for transmitting SDI signals (and the AW-CB400 remote operation panel is used to control the camera) • Use the supplied camera cable to connect the unit with the convertible camera containing the plugged-in SDI card (such as the AW-PB504N). • Use a coaxial cable to connect the SDI card’s SDI OUT connector with the unit’s SDI IN connector. Adjust the cable to a length at which the pan/tilt head will move smoothly. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the SDI card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the controller’s CONTROL OUT TO PAN/TILT HEAD connector. • Use a coaxial cable to connect the unit’s Pr/SDI OUT connector with the color monitor’s SDI input connector. • Use the cable supplied with the remote operation panel to connect the controller’s CAMERA CONTROL IN FROM ROP connector with the remote operation panel’s CONTROL OUT TO CONTROL PANEL connector. • Check that the pan/tilt head and camera can be controlled by the controller. AC adapter: AW-PS300AColor monitor Coaxial cable (BELDEN 8281), max. 666 ft. (200 m )10BASE-T (equivalent to UTP category 5) straight cable, max. 1640 ft. (500 m)Camera cable (supplied) Coaxial cable Pan/tilt control panel: AW-RP400Remote operation panel: AW-CB400 Cable supplied with AW-CB400 DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 37 - Connections ;When the pan/tilt head is to be controlled by the AW-RP400 pan/tilt head control panel for transmitting composite or component signals (and the WV-CB700A remote control box is used to control the camera) • Use the supplied camera cable to connect the unit with the convertible camera. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the analog/IEEE1394 card. • Use a 10BASE-T straight cable (UTP category 5) to connect the unit’s CONTROL IN IP/RP connector with the controller’s CONTROL OUT TO PAN/TILT HEAD connector. • Use a coaxial cable (BELDEN 8281) to connect the unit’s VIDEO OUT connector with the cable compensation unit’s Y VIDEO IN connector (when composite signals are to be transmitted). • Use a coaxial cable (BELDEN 8281) to connect the unit’s Y OUT connector, Pr/SDI OUT connector and Pb OUT connector with the cable compensation unit’s Y VIDEO IN connector, PR C IN connector and PB IN connector (when component signals are to be transmitted). • Use a coaxial cable to connect the cable compensation unit’s Y VIDEO IN connector, PR C IN connector and PB IN connector with the color monitor’s VIDEO input connector or component input connectors. • Use the cable supplied with the remote control box to connect the controller’s CAMERA CONTROL IN FROM RCB connector with the remote control box’s RCB connector. • Check that the pan/tilt head and camera can be controlled by the controller. AC adapter: AW-PS300AColor monitor Camera cable (supplied) Coaxial cable (BELDEN 8281), max. 1640 ft. (500 m ) 10BASE-T (equivalent to UTP category 5) straight cable, max. 1640 ft. (500 m) Coaxial cable Pan/tilt control panel: AW-RP400Remote control box: WV-CB700A Cable supplied with WV-CB700A Genlock signals must be supplied if a multiple number of cameras and pan/tilt heads are to be used. Cable compensation unit: AW-RC400 DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 39 - Connections =When the camera and pan/tilt head are to be controlled by a personal computer or other such unit • Use the supplied camera cable to connect the unit with the convertible camera. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the analog/IEEE1394 card. • Use the RS-232C cable (AW-CA28T9) to connect the personal computer or other such unit with the unit’s CONTROL IN RS-232C connector. • Use coaxial cables to connect the unit’s VIDEO OUT connector or Y OUT connector, Pr/SDI OUT connector and Pb OUT connector with the color monitor’s VIDEO input connector or component input connectors. • Check that the pan/tilt head and camera can be controlled by the controller. • Transmitting video signals over a long distance requires a separate cable compensation unit. ❈When SDI signals are to be transmitted, plug the SDI card (such as the AW-PB504N) into the convertible camera, connect the SDI card’s SDI OUT connector with the unit’s SDI IN connector using a coaxial cable, and select the transmission signal selection setting that supports the SDI card. Then use another coaxial cable to connect the unit’s Pr/SDI OUT connector with the color monitor’s SDI input connector. Personal computer (Windows) AC adapter: AW-PS300AColor monitor Camera cable (supplied) RS-232C cable: AW-CA28T9 • The BNC connectors are not connected to the pan/tilt head. • When using RS-232C for control, the maximum length of the RS-232C cable is 50 ft. (15 m). To further extend the cable length, convert RS-232C to RS-422 and convert it back to RS-232C at the pan/tilt head side. Coaxial cable DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)
- 40 - Connections >When the camera and pan/tilt head are to be controlled by both the AW-RP501 controller and a personal computer • Use the supplied camera cable to connect the unit with the convertible camera. • Set controller selection switch SW1 to the right side (RP501), and select the transmission signal selection setting that supports the analog/IEEE1394 card. • Follow connection example 1to connect the unit and AW-RP501 controller. However, when using a personal computer or other such unit to control the camera, leave the unit’s CAMERA CONTROL IN connector unconnected. • Use the RS-232C cable (AW-CA28T9) to connect the personal computer or other such unit with the unit’s CONTROL IN RS-232C connector. • Check that the pan/tilt head and camera can be controlled using the controller and personal computer or other such unit. However, the camera can be controlled solely by the controller if the unit’s CAMERA CONTROL IN connector and controller’s CAMERA CONTROL OUT connector are connected and solely by the personal computer or other such unit if these two connectors are not connected. ❈When SDI signals are to be transmitted, plug the SDI card (such as the AW-PB504N) into the convertible camera, connect the SDI card’s SDI OUT connector with the unit’s SDI IN connector using a coaxial cable, and select the transmission signal selection setting that supports the SDI card. Then use another coaxial cable to connect the unit’s Pr/SDI OUT connector with the color monitor’s SDI input connector. Hybrid control panel: AW-RP501 AC adapter: AW-PS300AColor monitor Camera cable (supplied) 10BASE-T (equivalent to UTP category 5) straight cable, max. 1640 ft. (500 m) Coaxial cable (BELDEN 8281), max. 1640 ft. (500 m ) Coaxial cablePersonal computer (Windows) RS-232C cable: AW-CA28T9 • The BNC connectors are not connected to the pan/tilt head. • When using RS-232C for control, the maximum length of the RS-232C cable is 50 ft. (15 m). To further extend the cable length, convert RS-232C to RS-422 and convert it back to RS-232C at the pan/tilt head side. DC cable (UL Type SPT-2 2!16 AWG or UL Type NISPT-2 2!16 AWG, to be locally purchased)