Panasonic Hx Wa03 Owners Manual

- 141 -
≥Set to Playback Mode. ( l38)
1Select the menu.
2Using the SET button, select [DELETE SINGLE], 
[DELETE SELECTED], [DELETE ALL] or [DELETE 
FOLDER] and press the SET button.
∫ Deleting a single file
3(When [DELETE SINGLE] is selected in Step 2)
Select the file to delete using the SET button.
4Select [DELETE] using the SET button and press the 
SET button.
Deleting files using the playback menu
[MENU]:   # [DELETE]1 

- 142 -
∫
Deleting selected files
3(When [DELETE SELECTED] is selected in Step 2)
Select the file to delete using the SET button and 
press the SET button.
≥  will appear on the selected file. To cancel, press the SET button 
again.
≥ You can continue selecting up to maximum of 100 files.
4Press the   button or the recording start/stop 
button.
≥A delete confirmation screen appears.
5Select [YES] using the SET button and press the SET 
button.
≥The selected files are deleted.
∫ Deleting all files
3 (When...

- 143 -
≥Files which cannot be played back (the thumbnails are displayed as 
) cannot be deleted.
≥ The deletion may take time if there are many files.
≥ If you delete scenes recorded on other products or still pictures 
conforming to DCF standard with this unit, all the data related to the 
scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are 
deleted, a still picture (other than JPEG) that cannot be played back on 
this unit may be erased.
≥ Files...

- 144 -
≥Always use the supplied AV cable.
≥ HDMI is the interface for digital devices. If you connect this unit to a 
HDMI compatible high-definition TV and then play back the recorded 
high-definition images, you can enjoy them in high resolution with high 
quality sound.
≥ Turn down the volume before connecting.
1Connect this unit to a TV.
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible with 
the terminals. Image quality may vary with...

- 145 -
≥Check that the plugs are inserted as far as they go.
≥ Do not use any other AV cables except the supplied one.
≥ Connecting the AV cable in the wrong direction may cause damage to 
the USB/AV connector of the unit. If the connector has become 
damaged, it may not operate correctly, including failure to recognize 
the cable even if it has been connected.
≥ Always use a genuine Panasonic HDMI micro cable (RP-CHEU15: 
optional).
2Select the video input on the TV.≥Example:
Select the [HDMI] channel...

- 146 -
3Play back from the unit
≥The volume cannot be adjusted on the unit. Please adjust the volume 
on the TV.
≥ This unit does not output images and sound when using the Wi-Fi 
function.
≥ Setting the [TV SYSTEM] to [NTSC] will not display the screen of the 
unit during recording standby. ( l148 ) Please check on the TV screen 
instead.
≥ About the video output
The video output destination varies depending on the status of 
the unit.
≤: Output
—: No output
≥ Scenes recorded with   is displayed on the...

- 147 -
∫
To watch images on a regular TV (4:3) or when both 
sides of the images do not appear on the screen
Change the menu setting to display the images correctly. (Check the TV 
setting.)
Example of images with a [16:9] aspect ratio on a regular TV (4:3)
≥If a wide-screen TV is connected, adjust the aspect setting on the TV. 
(Refer to the operating instructions of the TV for details.)
[MENU]:  
# [TV OUTPUT]  # [TV ASPECT] #  [4:3]
[TV ASPECT] setting
[16:9][4:3]
Refer to the following support site...

- 148 -
Connecting with an HDMI micro cable
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on 
information from the connected TV.
If the images are not output on the TV when the setting is [AUTO], 
switch to the method [720p], [1080i] or [480p] which enables the 
images to be displayed on your TV. (Please read the operating 
instructions for the TV.)
TV format setting
Set the format of the video signal output from the USB/AV connector.[MENU]:  
#...

- 149 -
≥Set to Playback Mode. ( l38)
1Select the menu.
≥If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with 
VIERA Link using an HDMI micro cable. (
l144 )≥It is recommended to connect this unit to an HDMI terminal other than 
the HDMI1 if there are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the 
operating instructions of the TV for how to set etc.)
≥ Always use a genuine Panasonic HDMI micro cable...

- 150 -
3Operate with the remote control for the TV.
∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also 
turns off.
Automatic input switching:
If you connect with an HDMI micro cable and then turn on this unit, the 
input channel on the TV automatically switches to this unit’s screen. If the 
TV’s power is in standby status, it will turn on automatically (if [Set] has 
been selected for the TV’s [Power on link] setting)....