Panasonic Hx Wa03 Owners Manual

- 181 -
Using a smartphone, you can perform record/playback operations from a 
remote location or upload motion pictures and still pictures recorded in 
this unit on SNS (Social Networking Service).
AWhen connecting to a smartphone
B When connecting to a wireless access point
≥ Refer to [Help] in the “Image App” menu for further details on how to 
operate.
Wi-Fi
Recording/playing back with 
remote operations
 [HX-WA30]
≥Before using, perform the preparations for using the Wi-Fi 
function. ( l162 )
≥ You...

- 182 -
Proceed to Step 3 when your Wi-Fi connection has been made via [Direct 
Connection] in [Wi-Fi SETUP] (l176 ).
1Press Wi-Fi button. 
2Select [LINK TO CELL] using the SET button and 
then press the SET button.
≥It will go into connection standby for remote operation.
3Start up the smartphone application “Image App”.≥When the connection is complete, images of this unit is displayed on 
the smartphone screen.
To exit remote operation:Press the SET button.
≥The message is displayed. Select [YES] to...

- 183 -
Smartphone screen shots are example displayed in Motion Picture 
Recording Mode and Playback Mode.
* The screen differs depending on the operating system.
Screen display during remote operations
Recording screen
1Remaining battery power of this unit
2 Zoom
3 Photoshot button
4 Menu display
5 Playback mode button
6 Recording mode button
7 Recording start/stop button
8 Name of the connected device
Playback screen
1Number of files
2 Camera function button
3 Menu display
4 Playback mode button
5...

- 184 -
∫
When Recording Mode
≥Turning the unit off
≥ Selecting a mode
≥ Recording motion pictures/still pictures
≥ Using the zoom (Available in the medium or fast speed)
≥ Switching on/off the Intelligent Auto Mode
≥ White Balance
≥ HDR Backlight Comp.
≥ REC MODE
≥ PICTURE SIZE
≥ SELF TIMER
≥ PHOTO VIEW
≥ FLASH
∫ When Playback Mode
≥Playback
jThe scenes recorded in iFrame cannot playback
≥ Delete
≥ Save (Copy)
jOnly iOS devices can transfer iFrame scenes
≥ Smart Home Network
jIt is possible to post to...

- 185 -
Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play 
back scenes and still pictures on the TV.
ADLNA-compatible TV
1Press Wi-Fi button. 
2Select [DLNA PLAYBACK] using the SET button and 
then press the SET button.
≥If you press the SET button, the Wi-Fi connection is canceled.
≥ When the connection is complete, the screen of this unit turns off. To 
display it again, operate any button on the unit.
3Select this unit (SSID) by the TV side.
Wi-Fi
DLNA playback [HX-WA30]
≥Before...

- 186 -
4Perform playback 
operations with the TV 
remote control.
≥Playback operations may differ 
depending on the TV in use.
≥ The following operations can be 
performed if a color button is pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback 
cannot be performed.
≥ Audio files cannot be handled.
≥ A maximum of 10,000 recorded files 
can be displayed. If more than 10,000 
files are stored in an SD card, only  10,000 of those will be displayed in 
descending order of the folder...

- 187 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press Wi-Fi button. 
2Select [Wi-Fi SETUP] using the SET button and then 
press the SET button.
3Select the desired menu item using the SET button 
and then press the SET button.
You can add or delete wireless access points, or rearrange the display 
order of wireless access points.
≥Up to 3 wireless access points can be set.
≥ Please refer to page  166 for details about...

- 188 -
To delete a wireless access point1Select the wireless access point to be deleted using the SET 
button and then press the SET button.
2 Select [
DELETE] using the SET button and then press the SET 
button.
≥ The message is displayed. Select [YES] to delete.
To switch the search order1 Select the access point you want to switch the order using 
the SET button and then press the SET button.
2 Select [
ACCESS PRIORITY] using the SET button and then 
press the SET button.
≥ The selected access point...

- 189 -
This will set/clear the Password to limit the startup of the Wi-Fi setting 
menu.
By setting the Password, it will prevent erroneous operation, prevent 
wrongful use of the Wi-Fi function by third party, and protect the set 
personal information.
1Select [
Setup] using the SET button and then press the SET 
button.
2 Select [
INPUT] using the SET button and then press the SET 
button.
3 Enter the Password (6 characters) using the SET button.
≥ After finish entering the Password, select [ENTER].
≥...

- 190 -
You can view and change this unit’s device name (SSID), which is used 
for operating this unit as a wireless access point.
1Select [
INPUT] using the SET button and then press the SET 
button.
2 Enter the desired device name (SSID).
≥ Input up to about 20 characters are recommended. All the characters 
cannot be confirmed when displaying the Device names on this unit if a 
long Device name is used. ( l177 )
≥ For details on how to enter characters, 
refer to page  172.
3 Select [ENTER] using the...