Panasonic Hx Dc10 Owners Manual

VQT3M88111
OPTION SETTINGS
ON: Use the VIERA Link.
OFF: Do not use the VIERA Link.
3 Toggle the SET button up or down to select the desired parameter.
4 Press the SET button.
5 Press the MENU button 2 times.
hThis completes the TV output setting. 

112VQT3M88
OPTION SETTINGS
Relation between [TV ASPECT] setting and TV 
display
The tables below show the video signal that is output when the [TV ASPECT] 
setting is changed. However, note that for some TVs that have an auto-detect 
function, the output may not conform to the table, or the TV display may not 
change at all.
[TV 
ASPECT]  settingTV type to be connectedImage file to be  displayedTV display
4:3 4:3 Photo
(4:3)
Video in SD mode
Video in HD mode 

VQT3M88113
OPTION SETTINGS
HINT
If the TV display is not correct…i If the appearance of the image on the TV monitor is not correct, you can 
either change the camera’s [TV ASPECT] setting, or change the screen 
size setting on your TV. To change the screen size setting on your TV, 
please refer to the instruction manual for your TV.
The aspect ratio of the output photo does not change to 16:9? i The photo output will be 4:3 for images captured in the 4:3 photo mode.16:9 16:9
Photo
(4:3)
Video in SD mode...

114VQT3M88
OPTION SETTINGS
Storage folder setting (page 109)
Create or select a recording folder (a folder in which to store recorded files).
1 Set the camera to the recording mode, and display the Option 
Setting Menu.
2 Select [REC FOLDER], and 
press the SET button.

hSelect [CREATE NEW 
FOLDER].

h Select the desired folder 
number.
3 Press the SET button.
hThis completes the create/select folder setting.
h If you created a new folder, it automatically becomes the selected 
recording folder.
HINT...

VQT3M88115
OPTION SETTINGS
Playback folder setting (page 109)
If the card contains multiple folders, you can select from which folder you 
would like to play back.
1 Set the camera to the playback mode, and display the Option Setting 
Menu.
2 Select [PLAYBACK FOLDER] and 
press the SET button.
3 Toggle the SET button up or down to select the desired playback 
folder, and press the SET button.
hThe files in the selected folder are displayed in the Playback Screen.
100CDPFP
101CDPFP
102CDPFP
PLAYBACK...

116VQT3M88
OPTION SETTINGS
File No. continued setting (page 109)

If a newly formatted card is used, the file name (image number) of the 
captured image automatically begins from 0001. If the card is subsequently 
reformatted, or if a different reformatted card is used, the file names again 
begin from 0001.

By setting the file number continued function to [ON], even if the card is 
reformatted or the card is replaced with another card, the consecutive 
numbering of file names continues from the last...

VQT3M88117
OPTION SETTINGS
iIf Card B already has files in it when it replaces Card A, file names are 
assigned as follows.
When the highest file number on Card B (before replacing) is lower 
than the highest file number on Card A:  the file name of the next 
recorded image continues from last file name recorded on Card A.
When the highest file number on Card B (before replacing) is higher 
than the highest file number on Card A:  the file name of the next 
recorded image continues from last file name...

118VQT3M88
OPTION SETTINGS
Formatting (initializing) (page 107)
A card must be formatted with this camera:i After purchasing, when used for the first time, or
i If it was formatted using a personal computer or other device.
The card cannot be formatted if the lock switch is set to the “LOCK” position. 
Proceed with the format procedure after setting the lock switch to the 
unlocked position (page 19).
HINT
Caution during formatting i Do not turn off the power to the camera or eject the card during...

VQT3M88119
OPTION SETTINGS
CHECKING THE REMAINING CARD 
MEMORY
You can check how many images can be captured, how much video recording 
time and how much audio recording time is available on the card. For a table 
showing the recording capacities of SD cards, please see pages 181 to 184.
Checking the remaining number of images and 
video recording time
1 Set the camera to the recording 
mode (page 37).
hThe remaining number of images 
appears in the upper left of the 
LCD monitor.
h The remaining video...

120VQT3M88
OPTION SETTINGS
Check the available audio recording time
1 Set the camera to the audio 
recording mode (page 69).
hThe remaining audio recording 
time is shown.
HINT
i When the remaining number of images or the remaining video recording 
time is “0”, you cannot capture any more images. To capture more images, 
either install a new card, or save the images to a computer and then delete 
them (pages 46 and 63) from the card.
i Even when the remaining number of images or the remaining video...