Panasonic Hx Dc10 Owners Manual

VQT3M8891
ADVANCED OPERATION/PLAYBACK
Editing videos (page 47)
You can trim away unwanted portions from a video and save it as a new video 
(video trimming [extracting]). You can also join videos together and save them 
as one separate clip (“splicing”).
Procedure to trim (extract) a portion of a video
J
Extract the specified portion.
12
ABC
Specify the frames 
( 1 , 2 ) where the 
video is to be split.
[Two ways to split the 
video] i Tr i m  a w a y  p o r t i o n s  
A and  C, and save 
portion  B.
i...

92VQT3M88
ADVANCED OPERATION/PLAYBACK
Procedure to splice videos
When editing videos...
iWhen editing videos, do not turn off the camera, as doing so may erase 
the original video.
i As the number or size of the videos increases, the card memory may 
become full, making it impossible to edit or save the videos. In this case, 
you will need to free some of the memory on the card by deleting files that 
are no longer necessary (pages 46 and 63). Specify the video that will come first.
J
J
Splice the...

VQT3M8893
ADVANCED OPERATION/PLAYBACK
Video trimming (extracting)
1 Select the video to be trimmed from the 8-image display.
hMove the yellow frame to the video you wish to trim (page 59).
2 Display the Playback Menu 2 
(page 38), select [EDIT VIDEO], 
and press the SET button.
3 Select [SPLIT] and press the SET 
button.
hThe Split Screen appears.
SET
EDIT VIDEO
SPLIT
SPLICE ENTER
00:00:10SPLIT
SAVE
Start point 

94VQT3M88
ADVANCED OPERATION/PLAYBACK
4 Specify the start point of the extract.
hPlay the video until approximately the desired point, pause the video 
then play the video one frame at a time, stopping at the start point of 
the extract. This will be the first frame of the extract.
h If the start point of the video is also the start point of the extract, 
proceed to step 5.
 Play:
After pausing playback, press and hold the SET button to the right for 
about 2 seconds for forward playback, or to the left...

VQT3M8895
ADVANCED OPERATION/PLAYBACK
5 Toggle the SET button up.
hThe start point of the video 
extract is set, and the screen to 
specify the end point appears.
h Specify the end point of the 
extract by following the same 
procedure as in step 4.

1 Toggle the SET button down.
hEach time the SET button is 
toggled down, the sections to 
delete and the sections to 
save are reversed.
2 Specify the end point of the 
extract. The frame following the 
end point of the extract will be 
the start point of...

96VQT3M88
ADVANCED OPERATION/PLAYBACK
7 Select the desired option, and press the SET button.
h Editing starts.
h When editing videos, do not turn off the camera, as doing so may 
erase the original video.
h When editing ends, you are returned to the Playback Menu.
HINT
i You will not be able to overwrite the file  if the original file is protected.
i If the “CARD FULL.” or “Built-in Memory full.” message appears, you will 
need to free some of the memory by deleting files that you do not need to 
keep.
i...

VQT3M8897
ADVANCED OPERATION/PLAYBACK
Splicing (joining) videos
HINTi Videos that were recorded in different modes cannot be spliced.
1 Display the Playback Menu 2 
(page 38), select [EDIT VIDEO], 
and press the SET button.
2 Select [SPLICE] and press the 
SET button.
h The 8-image playback display for 
videos appears.
3 Move the yellow frame to the 
video you wish to splice, and 
press the SET button.
hThe specified video is labeled 
with a number.
h Up to 9 videos can be selected.
h The splice order...

98VQT3M88
ADVANCED OPERATION/PLAYBACK
4 Press the [O] button or [ @] 
button.
h A screen appears for you to 
select either to save the spliced 
video as a new (separate) file, or 
to delete the original videos and 
replace them with the joined 
video.
SAVE AS NEW:
The spliced video clip will be saved 
as a new file. The original videos 
remain unchanged.
OV ERWRITE :
The original videos will be deleted. 
Only the joined video will be saved.
REVIEW CLIP:
Play back the spliced video before 
saving it.
5...

VQT3M8899
ADVANCED OPERATION/PLAYBACK
HINTi If the file size of the video after editing exceeds 4 GB, it is not possible to 
either “SAVE AS NEW” or “OVERWRITE”.
i You will not be able to overwrite the file if the original file is protected. If you 
want it to be erased, you will need to first remove the protection (page 87).
i If the “CARD FULL.” or “Built-in Memory full.” message appears, you will 
need to free some of the memory by deleting files that you do not need to 
keep.
i Audio files cannot be...

100VQT3M88
ADVANCED OPERATION/PLAYBACK
Copy (page 47)
Files can be copied from the built-in memory to the SD card.
1 Display Playback Menu 2, select [COPY], and press the SET button.
hThe Copy Screen appears.
2 Select the desired option,  and press the SET button.
[COPY SINGLE]:  Copy files one at a time.
[COPY SELECTED]:  Copy selected files (page 101).
[COPY ALL]:  Copy all the files.

h Toggle the SET button left or right to select the file you wish to copy.
h Proceed to step  3.

h Press the SET...