Panasonic Hx Dc10 Owners Manual

VQT3M88101
ADVANCED OPERATION/PLAYBACK
Copying selected filesCopy multiple selected files.
1 Display Playback Menu 2, select [COPY], and press the SET button.
hThe Copy Screen appears.
2 Select [COPY SELECTED], and press the SET button.
hThe screen to select files appears.
3 Toggle the SET button left, right, up or down to move the yellow 
frame to a file you wish to copy, and press the SET button.
hA checkmark is superimposed on the selected file.
h To deselect a file, move the yellow frame to the file,...

102VQT3M88
ADVANCED OPERATION/PLAYBACK
FILE INFO DISPLAY
You can check what the settings were when a file was recorded with your 
camera.
1 Set the camera to the playback mode (page 37).
2 Select the image for which you wish to display the information.
h Toggle the SET button up, down, left or right to move the yellow frame 
to the file you wish to play back.
3 Press the MENU button for 
at least 1 second.
hThe Information Screen 
appears.
h If the MENU button is 
pressed again, the 
Information Screen...

VQT3M88103
OPTION SETTINGS
OPTION SETTINGS
OPTION SETTINGS
DISPLAY THE OPTION SETTING 
MENU
The camera settings are executed via the Option Setting Menu.
1 Turn on the camera, and press 
the MENU button.
2 Select an Option tab (1, 2 or 3).
hThe Option Setting Menu 
appears.
h If you toggle the SET button to 
the right, the screen to select a 
setting to change appears.
To access a Setting Screen
3 Toggle the SET button up or down to select the item you wish to set, 
and press the SET button.
hThe Setting...

104VQT3M88
OPTION SETTINGS
INTRODUCTION TO THE OPTION 
SETTING MENU
Ta b  1
3 2
1
2
31
6
5
4
3
2
1
OPTION MENU 1
CLOCK SET
ALERT SOUND
DISPLAY
ECONOMY
BRIGHTNESS
ENTER 

VQT3M88105
OPTION SETTINGS
1CLOCK SET setting (page 34)
h Set the camera’s clock.
2 ALERT SOUND setting
h Settings for the types and 
volume of the camera’s 
operation sounds.
TURN ON/OFF:
Mute or enable the sounds 
when the camera is turned 
on or off.
SHUTTER: Select the sound that is 
produced when the [ O] 
button is pressed.
KEY SW: Select the sound that is 
produced when the SET 
button, MENU button, etc. 
are pressed.
OPERATION VOL: Adjust the volume of the 
operation sounds.
ALL OFF: The...

106VQT3M88
OPTION SETTINGS
Ta b  2
3 2
1
2
31
5
4 3
2
1OPTION MENU 2
LANGUAGE
TV OUTPUT
INITIAL SET
FORMAT
ENTER 

VQT3M88107
OPTION SETTINGS
1LANGUAGE setting
h Select the language in which 
the LCD monitor messages 
are displayed.
2 TV OUTPUT setting (page 110)
3 INITIAL SET
h Reset the camera settings to 
the factory-preset settings.
h The following settings do not 
change with this procedure:
Date and time setting
Language setting
4 FORMAT (page 118)
FORMAT: Logical format of the SD 
card or the built-in memory is 
executed.
DELETE DATA: Physical format of the SD 
card or the built-in memory is 
executed.
5...

108VQT3M88
OPTION SETTINGS
Ta b  3
3 2
1
2
3 1
OPTION MENU 3
4
3
1,2
ENTER
REC FOLDER
FILE NO. CONTD 

VQT3M88109
OPTION SETTINGS
1REC FOLDER setting 
(page 114) 
(when the recording mode is 
active)
h Select a folder to record to.
2 PLAYBACK FOLDER setting  
(page 115)
(when the playback mode is 
active)
h Select a folder to play back.
3 FILE NO. CONT’D setting 
(page 116)
4 Remaining battery charge 
display (page 121) 

110VQT3M88
OPTION SETTINGS
TV output setting (page 107)
Specify the type of image signal that is output from your camera’s USB/AV 
terminal.
1 Select [TV OUTPUT], and press 
the SET button.
TV SYSTEM:
Set the type of TV signal that is 
output from the USB/AV terminal.
TV ASPECT:
Set the TV’s aspect ratio.
HDMI:
Set the signal that is output from 
the HDMI terminal.
VIERA Link:
Set the VIERA Link function.
2 Select the desired setting, and press the SET button.
h The screen to change the parameter for the...