Panasonic Home Theater Audio System Sc-els10 Operating Instructions

11
RQT8979
4
Fix the speaker cables.
Press the speaker cables into the cable groove
provided in the stand.
The speaker cables must have a thickness of 3.0 mm
(1/8) or less to fit into the cable groove.
     Cable groove
When using speaker cables that are thicker than
3.0 mm (1/8), attach nylon clampers to the
speakers and use them to fix the cables.
Example:
   Nylon clamp (included)
   Screw for nylon clamp (included)
   Speaker cables
Repeat steps 1 to 4 and assemble the front
speaker L and...

12
RQT8979
Assembly and Installation
• When the speaker is wall-mounted, be sure to set “Setting a wall-mounted speaker”(á below) to “WALL ” before performing the auto speaker
setup (
á pages 26 and 27). Otherwise, the auto speaker setup cannot correctly adjust the audio to ELS surround characteristic.
Make this setting after connecting speakers and AC power supply cords. (á page 13)
• Be sure to make this setting before performing the auto speaker setup if this setting is made afterwards, the setting...

13
RQT8979
Connecting speakers and AC power supply cords
Front and surround speakers
(Front speaker L , Front speaker R          , Surround speaker L   , Surround speaker R  )
Connect the speaker cables   , which have been connected to “CENTER” of front speakersand          , to the center terminals on the
receiver.
• Before connecting these cables to the receiver, twist the conductors with the same polarity in the left and right speaker cables together
to make a single conductor.    
Connect the...

14
RQT8979
Subwoofer operation
The active subwoofer reproduces very low frequency sound monaurally, making use of the fact that the human ear does not sense
direction in the low frequency region.
You can emphasize low frequencies by combining the active subwoofer with the speaker system.
When you wish to reproduce 2-channel stereo music
The output in the low range sometimes may be excessively high depending on the setting of the receiver and the active subwoofer
when you are reproducing a multi-channel...

15
RQT8979
Connections
Connection cable (All cables are sold separately)
.
HDMI stands for High-Definition Multimedia Interface.
• The HDMI cable enables you to transmit digital audio and video signals using a single cable. You can also transmit control signals
using HDMI connections.
• The unit complies with CPPM
∗1. It can digitally transmit surround sound in DVD-Audio sources.
• We recommend using Panasonic cables 5.0 meters long or shorter for enjoying 1125p∗2 (1080p) pictures. They prevent picture...

16
RQT8979
Connections
Connection cable (All cables are sold separately)
• The input video signal can be sent out through an output terminal of the same type only.
• See page 21 for connecting the unit to a cable box or satellite receiver.
Connecting cables to video and audio terminals (to use the TV, DVD recorder, DVD player, VCR)
Video cable
Video connection cable
Audio cable
Optical fiber cable
Coaxial cableStereo connection cable
White
Red(L)
(R)
ïCDð
S VIDEOVIDEO
L
R
CD DVD 6CH 

SUBWOOFERBD/DVD/...

17
RQT8979
Connection cable (All cables are sold separately)
• The input video signal can be sent out through an output terminal of the same type only.
• See page 21 for connecting the unit to a cable box or satellite receiver.
Connecting cables to S video and audio terminals 
(to use the TV, DVD recorder, DVD player)
Video cable
S VIDEO connection cable 
Audio cable
Optical fiber cable
Coaxial cable
ïCDð
S VIDEOVIDEO
L
R
CD DVD 6CH 

SUBWOOFERBD/DVD/ VCR TV/STB
Y
TV
AUD IO
DIGITAL IN
DIGITAL...

18
RQT8979
Connections
The component video terminals can produce more accurate colors than the S video terminals (á page 17).
Connection cable (All cables are sold separately)
• The input video signal can be sent out through an output terminal of the same type only.
• See page 21 for connecting the unit to a cable box or satellite receiver.
Connecting cables to component and audio terminals (to use the TV and DVD recorder)
Video cableAudio cable
Video connection cableOptical fiber cable
ïCDð
S...

19
RQT8979
Connection cable (All cables are sold separately)
Make the following connections in addition to those instructed on pages 16 to 18.
• Speakers produce sounds when you make connections for either digital audio (OPTICAL) output or analog audio output. Make
connections according to your equipment and preference.
• Use the optical fiber cable for connection when your TV has the digital output terminal.
Other connections
Video cable
Video connection cable
Audio cable
Optical fiber cable
Stereo...

20
RQT8979
Connections
Connection cable (All cables are sold separately)
Make analog connections according to your equipment and preference. See pages 16 to 18 for video connections.
Other connections
Video cable
Video connection cableS VIDEO connection cable 
Audio cable
Optical fiber cable
Coaxial cableStereo connection cable
To enjoy analog sounds
To enjoy high-quality analog sounds using DVD-Audio discs (DVD analog 6-channel connections)
White
Red(L)
(R)
ïCDð
S VIDEOVIDEO
L
R
CD DVD 6CH...