Panasonic Home Network System Kx Hn Users Guide

RWireless router
R Hub (KX-HNB600)
R Indoor Camera (KX-HNC200, KX-HNC210)
Required procedures
R Hub initial setup and mobile device registration
Refer to the System Setup Guide included with your hub.
R Camera registration (if you didn’t purchase the camera as part of a pre-configured bundle)
Refer to the Installation Guide included with your camera.
R Use the  [Home Network]  app to configure the camera’s sound alert feature.
See  “Sound alert (indoor cameras only)”, Page 62.
You can keep the system...

App basics (overview)
To begin, simply start the  [Home Network] app on your mobile device by tapping its icon (shown below).
To prevent unauthorized access to the system, you may need to enter a system password. Whether or
not you need to enter the system password depends on how your mobile device is accessing the system,
as explained below.
Accessing while at home
If your mobile device is connected to the same wireless network as the hub, you do not need to enter the
system password when accessing the...

your mobile device. You can change this setting later if desired in the privacy section your mobile
device’s  [Settings]  app.
Using the home screen
The  [Home Network]  app home screen is displayed when you start the app.
Connection mode
The message displayed at the top of the app’s home screen indicates the current connection mode.
– [Home Wi-Fi Connected]  is displayed when your mobile device is connected to the hub while at
home (i.e., your mobile device is connected to the same wireless router as...

  
[Arm: At Home] mode selected
  
[Arm: Away] mode selected
  
[Disarm] mode selected
  
Mobile device is not connected to hub; arm mode is unknown
Note:
R If another user changes the arm mode, the arm mode icons displayed at the top of the home screen of
your mobile device will not change immediately. The icons will be updated and display the current arm
mode the next time the app refreshes the home screen, such as when you start the app or return to
the home screen from another screen.
Feature icons...

Displays the system configuration screen.
Returning to the previous screen
iPhone, iPad
Tap 
.
Android devices
Press your device’s “back” button.
Returning to the [Home Network] app home screen
Press your mobile device’s home button and then start the  [Home Network] app again.
You can also use the shortcuts menu to return to the app’s home screen ( “Using the shortcuts menu”,
Page 35).
Displaying the options menu
The method used to display the options menu varies depending on your mobile device. Note...

Accessing while away from home
If a mobile device is accessing the system while away from home (i.e., accessing from a different
network)
R The next mobile device that tries to access the system while away from home will be allowed to access
the system; the mobile device that was previously accessing the system will be disconnected.
R For mobile devices accessing at home, certain settings and features may be temporarily unavailable.
Camera features (while accessing at home)
If a mobile device is viewing...

RLandline calls can be received but not made.
R Other settings and features may be temporarily unavailable.
Exiting and logging out
Exiting the app
Use this procedure to exit the app.
iPhone, iPad
Use the standard iOS method for exiting an app.
Android devices
Use the standard Android method for exiting an app.
From the app’s home screen, you can also open the options menu ( “Displaying the options menu”,
Page 35) and then tap  [Exit].
Logging out while away from home
To log out of the system while away...

Status notifications for Android devices
The system provides information about system status by displaying status notifications, error messages,
and the following icons in your mobile device’s status bar and notifications panel.Window sensor was triggeredDoor sensor was triggeredMotion sensor was triggeredGlass break sensor was triggeredWater leak sensor was triggeredKeychain remote battery is low, or panic button feature was activatedCamera motion sensor was triggeredCamera audio and video are being...

Another user is using the deviceHub is busyHub’s date and time setting was corrected after a power outageDevice was registered to the hubArm mode was changedEntry delay countdown in effectOutdoor camera is too cold
*1 You can disable these icons from being displayed in your mobile device’s status bar, if desired( “[Connection Status Icon] (Android devices only)”, Page 98).
Confirming status in the [Home Network] app home screen
The system can provide information about system status by displaying...

Indicator blinking quicklyIndicator blinking very quicklyIndicator blinking slowly in two colorsIndicator blinking in two colors
Hub LED indicator
OffNo power, or LED indicator is turned off *1GreenNormal operation, connected to wireless router Registration mode Hub is searching for wireless routerGreen and yellowHub is starting upRedAlarm system is armed Alarm system was triggeredYellowInitial setup required Initial setup in progress, mobile device connected Initial setup is starting
*1 You can...