Panasonic Home Network System Kx Hn Users Guide

Access Keypad (KX-HNK101)
RAllows you to quickly confirm and change the system’s arm mode
R Can be wall mounted inside your home near the entrances and exits for easy access
21
Welcome to the Panasonic Home Network System!   

Keychain Remote (KX-HNK102)
RAllows you to quickly change the system’s arm mode when you come home or are going out
R Can be used to trigger a pre-programmed operation, such as turning on a smart plug or sounding an
alert
R Can be attached to a set of keys for added convenience
22
Welcome to the Panasonic Home Network System!   

Backup Battery (KX-HNP100)
RSupplies power to your hub or other devices in the event of a power outage
R Can be used to trigger the hub to call a pre-programmed phone number in the event of a power outage
23
Welcome to the Panasonic Home Network System!   

Digital Cordless Handset (KX-HNH100)
RMakes and receives calls using your landline
R Can be used to change the system’s arm mode
R Displays system status
24
Welcome to the Panasonic Home Network System!   

There are 4 basic steps you need to perform in order to access the system from your mobile device.Connections¯Connect your hub to a power outlet and to your telephone line. *1Download
¯Download the  [Home Network]  app to your mobile device.Initial setup
¯Use the  [Home Network]  app to configure the hub to connect to your
wireless router, and then register your mobile device to the hub.Register devicesAdd more mobile devices (smartphones and tablets), cameras,
sensors, and other devices to the system....

Before you begin
In this procedure, the hub will enter “temporary access point mode”. In this mode, you can connect your
mobile device directly to the hub using Wi-Fi®, and then use your mobile device to change the hub’s
Wi-Fi settings so that the hub can connect to your wireless router.
Confirm the following before you begin.
– Make sure you have installed the  [Home Network] app on your mobile device
– Make sure your wireless router and the hub are turned on and the hub’s LED indicator is lit in...

8When prompted, set the password used to log in to the hub while away from home and then tap  [OK].
9 When prompted, enter a name for your mobile device and then tap  [OK].
R This setting allows you to change the name assigned to your device. It can help you identify your
mobile device when performing certain operations, such as deregistering or making intercom calls
using a cordless handset.
10 When prompted, select whether you want to customize device profiles, i.e., the device name,
location, and...

8When prompted, select whether you want to customize device profiles, i.e., the device name,
location, and other settings for your devices.
R If you choose not to customize the device profiles now, you can change them later if desired (see
“Setting device profiles (device names, locations, and other settings)”, Page 92).
R If you choose to customize the device profiles now, change each setting as desired. When
finished, press your device’s “back” button repeatedly until the “completed” message is...

This section describes commonly used system features, the devices required for each example, and
briefly explains the required settings.
While away from home, you can receive a notification on your mobile device if the alarm system is
triggered.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R Any device equipped with a sensor that can trigger the alarm system
– Indoor Camera (KX-HNC200, KX-HNC210)
– Outdoor Camera (KX-HNC600)
–...

– Indoor Camera (KX-HNC200, KX-HNC210)
– Outdoor Camera (KX-HNC600)
Required procedures
R Hub initial setup and mobile device registration
Refer to the System Setup Guide included with your hub.
R Camera registration (if you didn’t purchase the camera as part of a pre-configured bundle)
Refer to the Installation Guide included with your camera.
R Use the  [Home Network]  app to configure a smart control scenario. Select a sensor as the trigger and
your camera as the target device.
See  “Creating a...