Home
>
Panasonic
>
Wireless Network
>
Panasonic Home Network System Indoor Siren Kx Hns105 Installation Guide
Panasonic Home Network System Indoor Siren Kx Hns105 Installation Guide
Have a look at the manual Panasonic Home Network System Indoor Siren Kx Hns105 Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installation Guide Home Network System Indoor Siren Model No. KX-HNS105 Thank you for purchasing a Panasonic product. This document explains how to install the indoor siren properly. For details about how to use the system, refer to the User’s Guide (page 12). Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web site: www.panasonic.com/support for customers in the U.S.A. or Puerto Rico. Please register your product: www.panasonic.com/prodreg In order to use this device: R Download the latest version of the [Home Network] app. R Update your hub to the latest firmware version (version 5.00 or later). For more information, refer to the User’s Guide (page 12). Printed in China HNS105_(en_en)_0209_ver.031.pdf 12015/02/09 21:38:39
Introduction Accessory information ...............3 Important Information About this system ......................4 For your safety ........................... 4 Important safety instructions ......5 For best performance ................5 Other information .......................6 Setup Part names and functions ..........7 LED indicator .............................7 Setup overview ..........................7 Registering the siren ..................8 Confirming the usage area ........9 Installation ............................... 10 Note about power connections ............................. 11 Appendix Testing the siren ...................... 12 Adjusting the siren’s volume ....12 Features available when using the [Home Network] app ................12 Accessing the User’s Guide .... 12 Specifications .......................... 13 FCC and other information ......14 Customer services ...................15 Warranty (For United States and Puerto Rico) .............................16 2 Table of Contents HNS105_(en_en)_0209_ver.031.pdf 22015/02/09 21:38:39
Accessory information Supplied accessories No. Accessory item/Part number Quantity A AC adaptor/PNLV2360Z 1 B DC extension cord/PNJA1159Z 1 C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 2A B C Other information R D esign and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Trademarks R i Phone and iPad are registered trademarks of Apple Inc. R Android is a trademark of Google Inc. R Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. R All other trademarks identified herein are the property of their respective owners. For assistance, please visit www.panasonic.com/support 3Introduction HNS105_(en_en)_0209_ver.031.pdf 32015/02/09 21:38:39
About this system R T his system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. R The system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure. For your safety T o prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R U se only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/ power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated d ust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. Danger of electric shock exists. R Never touch the plug with wet hands. Danger of electric shock exists. R Do not connect non-specified devices. Installation R T o prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not allow the AC adaptor to be excessively pulled, bent or placed under heavy objects. R Install the product only on a vertical surface. Do not install the product on a ceiling, as the product may fall, resulting in damage or injury. R Keep small parts (screws, etc.) out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately. 4 For assistance, please visit www.panasonic.com/supportImportant Information HNS105_(en_en)_0209_ver.031.pdf 42015/02/09 21:38:39
Operating safeguards R U nplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Never put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center. Medical R C onsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R N ever install wiring during a lightning storm. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. R To avoid the risk of strangulation, keep the product and the AC adaptor cord at least 1 m (3 feet) from a child’s crib and out of the reach of small children. Preventing accidents and injuries R D o not put your ear(s) near the product, as loud sounds emitted from the product may cause hearing impairment. R Do not look directly at the strobe light when it is flashing. Light emitted from the strobe light may cause damage to the eyes. R Consider the installation environment carefully when installing the product. Pay particular attention to infants, children, and the elderly, as they may be more sensitive to loud sounds and strobe lights. Important safety i nstructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Use only the power cord indicated in this document. SAVE THESE INSTRUCTIONS For b est performance Hub location/avoiding noise T he hub and other compatible Panasonic devices use radio waves to communicate with each other. For assistance, please visit www.panasonic.com/support 5Important Information HNS105_(en_en)_0209_ver.031.pdf 52015/02/09 21:38:39
R For maximum coverage and noise-free communications, place your hub: – at a convenient, high, and centrallocation with no obstructions between the product and hub in an indoor environment. – away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. – facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.) R If the reception for a hub location is not satisfactory, move the hub to another location for better reception. Environment R K eep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided. R O perating the product near electrical appliances may cause interference. Move away from the electrical appliances. Other information Routine care R W ipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Notice 6 For assistance, please visit www.panasonic.com/supportImportant Information HNS105_(en_en)_0209_ver.031.pdf 62015/02/09 21:38:39
Part names and f unctions Horn Strobe light F lashes when the siren is sounding. LED indicator M H IGH N/M LOW N Used to adjust the siren’s volume (page 12). Rear cover M N U sed to register the siren to the hub. LED indicator Y ou can use the LED indicator to confirm the siren’s status. Indicator Status Green, lit Normal operation Red, b linking slowly Siren is not registered t o a hub Red, b linking Siren is out of range of t he hub Red, b linking quickly Alarm system was t riggered Green, b linking Registration mode ( You pressed and held M N ) Off No power Setup overview 1 I nitial setup Make sure you can access the system using your mobile device. For details, refer to the System Setup Guide included with your hub. 2 Registration Required only if the siren was purchased separately (i.e., not as part of a bundle). 3 Confirm the installation area Read the information in this document to confirm that the desired installation area is suitable to proper operation. For assistance, please visit www.panasonic.com/support 7 Setup HNS105_(en_en)_0209_ver.031.pdf 72015/02/09 21:38:39A BD EF C
4 Installation Install the siren in the desired location. Registering the siren This procedure is not required for d evices that were included as part of a bundle. Before you can use the siren, it must b e registered to the hub. If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub. You can register each device by using the registration buttons or the [Home Network] app. Note: R Before registering the siren, make sure the AC adaptors of the hub and siren are connected and each device is powered. Using registration buttons 1 H ub: Press and hold M OTHER D EVICE N until the LED indicator blinks in green. 2 Siren: Press and hold M N until the LED indicator blinks in green (page 7). R When registration is complete, the hub sounds one long beep. Note: R To cancel without registering the siren, press M N on the hub and on the siren again. R I f registration fails, the hub sounds several short beeps. Using the app W hen you register the siren by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 12). 8 For assistance, please visit www.panasonic.com/supportSetup HNS105_(en_en)_0209_ver.031.pdf 82015/02/09 21:38:39
Confirming the u sage area Wireless communication r ange The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Note: R You can use the siren’s LED indicator to confirm the siren’s communication status (page 7). If the LED indicator is lit in green or is blinking quickly in red, the siren is communicating properly with the hub. Usage area cautions U sing the siren in the following areas may cause deformation, malfunction, or operational failure. R In direct sunlight R Areas exposed to grease or steam, such as kitchens R N ear fire or heating devices RNear magnetic fields (such as near microwaves and magnets) R Areas subject to extreme temperature changes, such as next to air conditioners R Areas with reflective objects, such as glass, that can interfere with detection of temperature variation R Areas where the temperature is affected by strong illuminating objects (such as fluorescent lights) R Near devices that emit strong radio waves, such as mobile phones For assistance, please visit www.panasonic.com/support 9 Setup HNS105_(en_en)_0209_ver.031.pdf 92015/02/09 21:38:39
Installation M ount the siren on a wall using the holes in the rear cover. Note: R The strobe light flashes when the siren sounds. Mount the siren in a location where its strobe light will be visible. R Mount the siren on the stable location where the siren can be adequately supported when mounting. R Mount the siren securely to a wall. Vibrations may cause it to fall if it is not secured. R Do not mount siren on a soft material. It may fall down, break or cause injury. R Do not mount the siren on the following places: gypsum board, ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25.4 mm (1 inch) thick, etc. R Use only the supplied Panasonic AC adaptor PNLV236. 1 R emove the rear cover by pressing the upper sides of the cover ( A) and sliding it down ( B). 2 A ttach the rear cover to the wall by using screws ( ). R P lace the rear cover with “ UP” mark facing upwards. R 37 mm (1 15/32 inches) 10 For assistance, please visit www.panasonic.com/supportSetup HNS105_(en_en)_0209_ver.031.pdf 102015/02/09 21:38:39AB 1 2 2 1 1 U P UP