Panasonic Home Network System Indoor Siren Kx Hns105 Installation Guide

Installation Guide
Home Network System
Indoor Siren
Model No.    KX-HNS105 Thank you for purchasing a Panasonic product.
This document explains how to install the indoor siren properly.
For details about how to use the system, refer to the User’s Guide
(page 12). Please read this document before using the unit and save it for future
reference. For assistance, please contact us at 1-800-272-7033 or visit
our 
Web site:  www.panasonic.com/support  for customers in the U.S.A.
or Puerto Rico. Please register...

Introduction
Accessory information 
...............3
Important Information
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions  ..........7
LED indicator  .............................7
Setup overview  ..........................7
Registering the siren ..................8
Confirming the usage area  ........9
Installation...

Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A AC adaptor/PNLV2360Z 1
B DC extension cord/PNJA1159Z 1
C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 2A B C
Other information
R
D
esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product. Trademarks
R
i

Phone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google Inc.
R Microsoft, Windows, and...

About this system
R
T
his system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure....

Operating safeguards
R
U
nplug the product from power
outlets before cleaning. Do not use
liquid or aerosol cleaners.
R Do not disassemble the product.
R Never put metal objects inside the
product. If metal objects enter the
product, turn off the circuit breaker
and contact an authorized service
center. Medical
R
C

onsult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT...

R
For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and centrallocation with no obstructions
between the product and hub in
an indoor environment.
– away from electronic appliances such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not...

Part names and
f
unctions Horn
Strobe light
F

lashes when the siren is
sounding. LED indicator
M
H
IGH N/M LOW N
Used to adjust the siren’s volume
(page 12). Rear cover
M N
U

sed to register the siren to the
hub. LED indicator
Y

ou can use the LED indicator to
confirm the siren’s status. Indicator Status
Green, lit Normal operation
Red,
b
 linking
slowly Siren is not registered
t
o a hub
Red,
b
 linking Siren is out of range of
t
he hub
Red,
b
 linking
quickly Alarm system was
t
riggered
Green,
b...

4
Installation
Install the siren in the desired
location. Registering the siren
This procedure is not required for
d
 evices that were included as part of
a bundle. Before you can use the siren, it must
b

e registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the  [Home
Network]  app.
Note:
R Before registering the siren, make
sure the AC adaptors of the hub...

Confirming the
u
sage area Wireless communication
r

ange
The wireless communication range of
each device in the system from the hub
is approximately 50 m (160 feet)
indoors and approximately 300 m
(1,000 feet) outdoors. Wireless
communication may be unreliable
when the following obstacles are
located between the hub and other
devices.
R Metal doors or screens
R Walls containing aluminum-sheet
insulation
R Walls made of concrete or
corrugated iron
R Double-pane glass windows
R Multiple walls
R When using...

Installation
M
ount the siren on a wall using the
holes in the rear cover.
Note:
R The strobe light flashes when the
siren sounds. Mount the siren in a
location where its strobe light will be
visible.
R Mount the siren on the stable
location where the siren can be
adequately supported when
mounting.
R Mount the siren securely to a wall.
Vibrations may cause it to fall if it is
not secured.
R Do not mount siren on a soft
material. It may fall down, break or
cause injury.
R Do not mount the siren on the...