Panasonic High Definition Plasma Display Th 42pf11 Operating Instructions

3D Y/C FILTER (NTSC) 
COLOR SYSTEM 
SIGNAL 
ON 
AUTO 
3 : 2 PULLDOWN 
Panasonic AUTO (4 : 3)  OFF 
4:3
[  VIDEO  ] 
3 : 2 PULLDOWN 
OFF 
XGA MODE1024 × 768
41
3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of...

REFRESH RATE100 Hzq
ADVANCED NR [ 
VIDEO  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[ 
Digital  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[ 
COMPONENT  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[ 
RGB  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
()NOISE REDUCTION
OFF 
()NOISE REDUCTIONADVANCED
42
VIDEO NR:        Automatically reduces unwanted picture noise.
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR:       Reduces block noise when...

SYNC
SIGNAL[ 
RGB  ]
3 : 2 PULLDOWN
XGA MODE AUTO
OFF
1024 × 768
SYNC AUTO
SYNC ON G
SYNC VBS
H-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60
H-FREQ.
V-FREQ. kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT 1280×1024/60
3 : 2 PULLDOWN
SIGNAL
OFFSDI THROUGH OFF
[ 
Digital  ] 
NOISE REDUCTION
OFF
REFRESH RATE
100 Hz
43
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
SYNC
Setting RGB sync signal
Confi rm that the input is set to RGB INPUT (this...

Options 
Weekly Command Timer
1/3  
Initial INPUT  Onscreen display On 
O f f 
Off Off
0
0Maximum VOL level
Initial VOL levelOffINPUT lockOffButton lockOffRemocon User level
Options
EnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain
2/3
3/3 Options 
O f f 
Off
Off
Clock Display
Rotate
Off
All Aspect
Slot1
Serial Slot Select Slot power 
Off
Power On Screen Delay
44
1
2
3
5Press to display the Setup menu.
4
6
Item Adjustments
Weekly...

45
ItemAdjustments
INPUT lockOff   PC   INPUT1   INPUT2   INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 15).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be 
fi xed as the value input in 
the single screen display mode.
• When a dual input terminal board is attached, A or B is displayed depending on...

46
ItemAdjustments
Studio W/BOff:  Nullify all the settings adjusted.
On:  Sets the color temperature for TV studio.
Note:  Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu.
Studio Gain Sharpens the contrast for a better view when a part of the image is too \
light to see.
Off: Disables “Studio Gain”.
On: Enables “Studio Gain”.
Note:  This setting is valid only when the input signals are as follows:
    Component Video, RGB (analog), SDI, HDMI
Slot Power Off  Auto  On
 
Off:  Power is...

Options 
On Weekly Command TimerOnscreen display 
1/3  
Weekly Command Timer 
Program1MondayOnFunction
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
yProgram3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 0102
1/8
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12  PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
20:00 
20:30 57 
58 
8/8   
22:00 59 --:-- 60 --:--...

Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
1/2
SIGNALPC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
SCREENSAVER
SHIPPING YES 
48
This function allows you to reset the unit to the factory setting.
Shipping condition
1
2
3
4Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press and hold...

49
Troubleshooting
Before you call for service, determine the symptoms and make a few simpl\
e checks as shown below.
SymptomsChecks
PictureSound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo Sound
Volume
(Check whether the mute function has been activated on the remote contr\
ol.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote co\...

50
List of Aspect Modes
Aspect modePicture 
 Enlarged screen DescriptionAll Aspect: 
OnFactory setting
All Aspect: Off
16:9 FULL
The display of the pictures  fi lls the screen.
In the case of SD signals, pictures with a 4:3 aspect ratio are 
enlarged horizontally, and displayed. This mode is suited to 
displaying anamorphic pictures with a 16:9 aspect ratio.
14:9 –
Letterbox pictures with a 14:9 aspect ratio are enlarged 
vertically and horizontally so that their display  fi lls  the 
screen vertically and...