Home
>
Panasonic
>
Display
>
Panasonic High Definition Plasma Display Th 42pf11 Operating Instructions
Panasonic High Definition Plasma Display Th 42pf11 Operating Instructions
Here you can view all the pages of manual Panasonic High Definition Plasma Display Th 42pf11 Operating Instructions. The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
SCREENSAVER
START
FUNCTION
MODE
SIDE BAR ADJUST
WOBBLING
PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY
OFF
6:15
12:30
BRIGHT OFF
OFF
PRESENT TIME OF DAY 99:99
SCREENSAVER
START
FUNCTION
MODE
WOBBLING
PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY
OFF
6:15
12:30
OFF
OFF
SIDE BAR ADJUST
BRIGHT
PRESENT TIME OF DAY 99:99
31
These functions prevent the occurrence of an “image retention” on \
the display when turned ON.
WOBBLING: Automatically shifts the...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-30.png "Page 31
SCREENSAVER
START
FUNCTION
MODE
SIDE BAR ADJUST
WOBBLING
PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY
OFF
6:15
12:30
BRIGHT OFF
OFF
PRESENT TIME OF DAY 99:99
SCREENSAVER
START
FUNCTION
MODE
WOBBLING
PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY
OFF
6:15
12:30
OFF
OFF
SIDE BAR ADJUST
BRIGHT
PRESENT TIME OF DAY 99:99
31
These functions prevent the occurrence of an “image retention” on \
the display when turned ON.
WOBBLING: Automatically shifts the...")
SCREENSAVER START FUNCTION MODE SIDE BAR ADJUST WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY OFF 6:15 12:30 BRIGHT OFF OFF PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY OFF 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DAY 99:99 31 These functions prevent the occurrence of an “image retention” on \ the display when turned ON. WOBBLING: Automatically shifts the...
Page 32
![Page 32
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL SIGNAL
SCREENSAVER
POWER SAVE
SET UP
32
Reduces power consumption
Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On
Off
Press to exit from SET UP.
• POWER SAVE:
When this function is turned ON, luminous level of the Plasma Display is\
suppressed, so
power consumption is reduced.
• STANDBY SAVE:...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-31.png "Page 32
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL SIGNAL
SCREENSAVER
POWER SAVE
SET UP
32
Reduces power consumption
Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On
Off
Press to exit from SET UP.
• POWER SAVE:
When this function is turned ON, luminous level of the Plasma Display is\
suppressed, so
power consumption is reduced.
• STANDBY SAVE:...")
1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 32 Reduces power consumption Press to select “POWER SAVE” “STANDBY SAVE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON” or “OFF”. On Off Press to exit from SET UP. • POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is\ suppressed, so power consumption is reduced. • STANDBY SAVE:...
Page 33
2/2 SET UP MULTI DISPLAY SETUPSET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATIONLANDSCAPE MULTI PIP SETUPPORTRAIT SETUP 1/2 PC OFF STANDBY SAVE OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 33 Press to select INPUT LABEL. Press to change the INPUT LABEL. This function can change the label of the Input signal to be displayed. Select the input signal which you would like to change its label before \...
Page 34
![Page 34
2/2 SET UP
MULTI DISPLAY SETUPSET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
MULTI PIP SETUPPORTRAIT SETUP
34
By lining up Plasma Displays in groups, for example, as illustrated belo\
w, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a \
Display number to determine its location.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
How to setup MULTI DISPLAY
× 2
MULTI DISPLAY...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-33.png "Page 34
2/2 SET UP
MULTI DISPLAY SETUPSET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
MULTI PIP SETUPPORTRAIT SETUP
34
By lining up Plasma Displays in groups, for example, as illustrated belo\
w, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a \
Display number to determine its location.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
How to setup MULTI DISPLAY
× 2
MULTI DISPLAY...")
2/2 SET UP MULTI DISPLAY SETUPSET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATIONLANDSCAPE MULTI PIP SETUPPORTRAIT SETUP 34 By lining up Plasma Displays in groups, for example, as illustrated belo\ w, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a \ Display number to determine its location. Press to select the MULTI DISPLAY SETUP. Press to display the “MULTI DISPLAY SETUP” menu. How to setup MULTI DISPLAY × 2 MULTI DISPLAY...
Page 35
![Page 35
35
You can set the remote control ID when you want to use this remote contro\
l on one of several different displays.
SET UP for MULTI DISPLAY
1
2
3Switch to on the right side.
Press the
button on the remote control.
Press one of
- , for the tens digit setting.
Press one of
- , for the units digit setting. 4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-34.png "Page 35
35
You can set the remote control ID when you want to use this remote contro\
l on one of several different displays.
SET UP for MULTI DISPLAY
1
2
3Switch to on the right side.
Press the
button on the remote control.
Press one of
- , for the tens digit setting.
Press one of
- , for the units digit setting. 4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become...")
35 You can set the remote control ID when you want to use this remote contro\ l on one of several different displays. SET UP for MULTI DISPLAY 1 2 3Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes: • The numbers in 2, 3 and 4 should be set up quickly. • Adjustable ID number range is 0 - 99. • If a number button is pressed more than two times, the fi rst two numbers become...
Page 36
— MULTI PIP DISPLAY MODE PIP OFF 1 INSERT LEVEL TRANSPARENCY INSERT 0 % TRANSPARENCY LEVELOFF MULTI PIP SETUP 2/2 SET UP MULTI DISPLAY SETUP SET UP TIMERMULTI PIP SETUPPORTRAIT SETUP 36 MULTI PIP SETUP Set the two-screen display function that is activated when is pressed. Press to select the MULTI PIP SETUP. Press to display the “MULTI PIP SETUP” menu. Press to display the SET UP menu. 1 2 3 Press to select the menu to adjust. Press to adjust the menu. Sub Screen Insertion (During BLEND PIP) 1...
Page 37
![Page 37
37
Divide an input image into 3 parts, and display one of them to a plasma \
display which is set vertically. The image will be enlarged 3
times and rotated 90-degree.
SET UP for PORTRAIT
(Example)
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-36.png "Page 37
37
Divide an input image into 3 parts, and display one of them to a plasma \
display which is set vertically. The image will be enlarged 3
times and rotated 90-degree.
SET UP for PORTRAIT
(Example)
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to...")
37 Divide an input image into 3 parts, and display one of them to a plasma \ display which is set vertically. The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP. Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP. Press to select “ON” or “OFF”. Note: If you set PORTRAIT SETUP to ON, MULTI DISPLAY SETUP will be unavailable. Press to select SEAM HIDES VIDEO. Press to...
Page 38
![Page 38
38
SET UP for PORTRAIT
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
• For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed.
HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p\
• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i
• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.
Press twice to exit from SET UP.
7
6
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”.
Adjust to equalize the...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-37.png "Page 38
38
SET UP for PORTRAIT
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
• For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed.
HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p\
• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i
• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.
Press twice to exit from SET UP.
7
6
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”.
Adjust to equalize the...")
38 SET UP for PORTRAIT Press to select VIEWING AREA or LOCATION. Press to select each function. Notes: • For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed. HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p\ • 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i • When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”. Press twice to exit from SET UP. 7 6 Press to select AI-SYNCHRONIZATION. Press to select “OFF” , “ON”. Adjust to equalize the...
Page 39
1/2 PC OFF STANDBY SAVE OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 1/2 PC OFF STANDBY SAVE OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) YUV/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 39 SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, P B, PR signals...
Page 40
![Page 40
1/2
SIGNAL
SCREENSAVER
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[ VIDEO ]
NOISE REDUCTION
OFFREFRESH RATE100 Hz
3 : 2 PULLDOWN
SIGNAL
OFF
[
Digital ]
NOISE REDUCTION
OFF
REFRESH RATE
100 HzH-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT 1280×1024/60
3 : 2 PULLDOWN
SIGNAL
OFF...](http://img.usermanuals.tech/thumb/58/71500/w300_th-42pf11_en_om_d-39.png "Page 40
1/2
SIGNAL
SCREENSAVER
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[ VIDEO ]
NOISE REDUCTION
OFFREFRESH RATE100 Hz
3 : 2 PULLDOWN
SIGNAL
OFF
[
Digital ]
NOISE REDUCTION
OFF
REFRESH RATE
100 HzH-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT 1280×1024/60
3 : 2 PULLDOWN
SIGNAL
OFF...")
1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] NOISE REDUCTION OFFREFRESH RATE100 Hz 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION OFF REFRESH RATE 100 HzH-FREQ. V-FREQ.kHz Hz 63.98 60.02 DOT CLOCK FREQ.MHz 108.0 SIGNAL FORMAT 1280×1024/60 3 : 2 PULLDOWN SIGNAL OFF...