Panasonic High Definition Plasma Display Th 42pf11 Operating Instructions

21
MULTI PIP
Selecting the Target Screen for Operations
 Each time this button is pressed, the target screen for operations chang\
es.
PCINPUT1PCINPUT1
Main screen Sub screen
Main screen input mode Sub screen input mode
Operations on 
the main screen Operations on 
the sub screen
Notes:
• When operations are performed for the sub screen, the sub screen au\
dio is played.
• If no operations are performed, the operation target returns to the\
 main screen after about 5 seconds*. You can also 
return to...

INPUT MENUENTER/+/
VOL-/
2
EXIT
2
1
EXIT
× 1× 2× 3× 4
22
VOL button
Digital Zoom
This displays an enlargement of the designated part of the displayed ima\
ge.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following oper\
ation...

2/2 
ADVANCED SETTINGS  COLOR TEMP 
COLOR MANAGEMENT NORMAL 
OFF ON 
PICTURE 
0
NORMALNORMALIZE
AUTO SETUP
POS. /SIZE
V-POS
0
H-POS
V-SIZEDOT CLOCK H-SIZE
CLOCK PHASE
1:1 PIXEL MODEOFF
000
0
1/2
SIGNAL
SET UP
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL SCREENSAVER
POWER SAVE
2/2 SET UP
MULTI DISPLAY SETUP SET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
MULTI PIP SETUPPORTRAIT SETUP
3D Y/C FILTER (NTSC)...

0
NORMALNORMALIZE
AUTO SETUP
POS. /SIZE
V-POS
0
H-POS
V-SIZEDOT CLOCK H-SIZE
CLOCK PHASE
1:1 PIXEL MODEOFF
000
0
0 
0 
0 
NORMAL NORMALIZE 
POS. /SIZE 
V-POS  H-POS 0 
V-SIZE  H-SIZE 1:1 PIXEL MODE OFF 
AUTO SETUP
24
Adjusting POS. /SIZE
1Press to display the POS. /SIZE menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
During “VIDEO (S VIDEO)”, “
Digital”, 
“SDI” and “HDMI” input signal.
During “COMPONENT”, “RGB” 
and “PC” input signal.
Notes:
•...

25
While the POS. /SIZE display is active, if either the N button on the re\
mote control is pressed at any time or the ACTION 
( ) button is pressed during “NORMALIZE”, then all adjustment value\
s are returned to the factory settings.
Helpful Hint (   / NORMALIZE  Normalization)
Adjusting POS. /SIZE
1:1 PIXEL MODE Adjusts the display size when 1125i, 1125p or 1250i signal is input.
Notes:
•  Select ON when you would like to replay 1920 × 1080 input signal.
•  Applicable input signal;
  1125 (1080) /...

2/2
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL
OFFON
PICTURE
1/2 
25 
0 
0 
0 
5 
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
0 
0 
2.2 
1/2 
BLACK EXTENSION 
AGC  GAMMA  INPUT LEVEL 
ADVANCED SETTINGS 
NORMAL NORMALIZE 
OFF 
0 
0 
0 
0 
0 
0 
2/2 
W/B LOW B  W/B HIGH R 
W/B LOW R 
W/B LOW G  W/B HIGH G 
W/B HIGH B 
ADVANCED SETTINGS 
26
Press the left    or right     button to switch between modes.
     MONITOR
STANDARD
CINEMA DYNAMIC
STANDARD...

27
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” and “Digital” input 
signal.
•
  You can change the level of each function  (PICTURE, BRIGHTNESS, COLOR, TINT, 
SHARPNESS) for each PICTURE MENU.
•  The setting details for STANDARD, DYNAMIC  and CINEMA respectively are memorized 
separately for each input terminal.
• The “TINT” setting can be adjusted  for NTSC signal only during “VIDEO 
(S VIDEO)” input signal.
•  In PICTURE, there is not a...

0 
0 
0 
1/2
SOUND 
NORMAL NORMALIZE STANDARD 
OFF 
TREBLE  AUDIO MENU 
BALANCE  BASS 
0 
MID 
SURROUND 
MAIN 
AUDIO OUT (PIP) 
28
SOUND Adjustment
Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
1Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
2Select to adjust each item.
While the “SOUND” menu is displayed, if either the N button on the\
 remote control is...

2/2 SET UP
MULTI DISPLAY SETUPMULTI PIP SETUPPORTRAIT SETUPSET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
29
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the Plasma Display ON or OFF.
Before attempting Timer Set, confi  rm the PRESENT TIME OF DAY and adjust if 
necessary. Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select SET UP TIMER or 
PRESENT TIME SETUP.
Press to display the SET UP TIMER screen or PRESENT TIME SETUP...

1/2
SIGNAL
SCREENSAVER
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
SCREENSAVER 
START 
FUNCTION 
WOBBLING 
PEAK LIMIT  FINISH TIME  START TIME SCROLLING BAR ONLY
6:15 
12:30 
OFF 
OFF 
SIDE BAR ADJUST 
BRIGHT 
PRESENT  TIME OF DAY    99:99 
MODE OFF
SCREENSAVER 
START 
FUNCTION 
MODE 
FINISH TIME  START TIME  SCROLLING BAR ONLY
TIME OF DAY 
6:15 
12:30 
PRESENT  TIME OF DAY    15:00
SCREENSAVER 
START...