Panasonic High Definition Plasma Display Th 103pf10 Operating Instructions

31
Do not display a still picture, especially in NORMAL mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
NEGATIVE / SCROLL selection
2
3 1
4
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
WHITE BAR SCROLL   NEGATIVE 
WHITE BAR SCROLL  : A white bar will scroll from left to right.
NEGATIVE    : A negative image will be displayed on the...

32
Setup of SCREENSAVER Time
After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating 
Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select START TIME / FINISH TIME
(When TIME OF DAY is selected).
Press to select SHOW DURATION / SAVER 
DURATION (When INTERVAL is selected).
Press to setup.
   button: Forward
   button: Back
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. Notes:
 • Pressing...

33
SIDE BAR ADJUST
1
Press to select the SIDE BAR ADJUST.
Press to select OFF, DARK, MID, BRIGHT.
Press to exit from SCREENSAVER.
2
Do not display a picture in NORMAL mode for an extended 
period, as this can cause an image retention to remain on 
the side panels either side of the display fi eld.
To reduce the risk of such an image retention, illuminate the 
side panels.
Display the SCREENSAVER screen.
(Refer to the previous page, operation guide steps 1 and 2)
Notes: 
•  To reduce the occurrence of...

34
Reduces power consumption
Press to select 
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On 
 Off
Press to exit from SET UP. • POWER SAVE:  When this function is turned ON, luminous level of the Plasma Display is suppressed, so 
power consumption is reduced.
• STANDBY SAVE:  When this function is turned ON, power consumption of the microcomputer is reduced 
during power supply standby (see page 13-15), so standby power of the set is reduced.
• POWER...

35
By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location.
Press to display the SET UP menu.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” 
menu.
Press to select the MULTI DISPLAY SETUP.
Press to select “ON” or “OFF”.
How to setup MULTI DISPLAY
group of 16 (4 × 4) group of 4 (2 ×...

36
SET UP for MULTI DISPLAY
How to set the Display location number for each Plasma Display 
Display Number locations for each arrangement.
(Examples)
4
7
A1
OFF
AI-SYNCHRONIZATION LOCATION MULTI DISPLAY SETUP OFF 
OFF 
MULTI DISPLAY SETUP 
HORIZONTAL SCALE 
VERTICAL SCALE 
SEAM HIDES VIDEO × 2 
× 2 
MULTI DISPLAY SETUP OFF 
OFF 
A1 
LOCATION 
MULTI DISPLAY SETUP 
HORIZONTAL SCALE 
VERTICAL SCALE 
SEAM HIDES VIDEO × 2 
× 2 
OFF
AI-SYNCHRONIZATION
( 2 × 1) ( 2 × 3 )
A1 A2 A3 A4 A5
B1 B2 B3 B4 B5
C1 C2 C3...

37
SET UP for MULTI DISPLAY
1
2
3Switch  to  on the right side.
Press the 
 button on the remote control.
Press one of 
 - ,  for the tens digit setting.
Press one of 
 - ,  for the units digit setting. 4
Notes:
•  The numbers in 2, 3 and 4 should be set up quickly.
•  Adjustable ID number range is 0 - 99.
•  If a number button is pressed more than two times, the fi rst two numbers become the ID number 
for the remote control.
ID Cancellation
Press  button on remote control. (This has the same effect as...

38
SET UP for PORTRAIT
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI 
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to select “OFF” , “ON”.
How to setup PORTRAIT
1
2
3
4
To hide joints between displays.
Suitable for moving image display.To show joints between displays.Suitable for still image...

39
SET UP for PORTRAIT
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
•  When the input signal is FULL, VIEWING AREA is fi xed to “16:9”.
•  When “VIEWING AREA” is “16:9”, the aspect mode is set to “FULL”.
Press twice to exit from SET UP.7
6
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”. Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting. 
The brightness depends on 
each display’s setting.Equalize the brightness of 
all the...

40
SET UP for Input Signals
3D Y/C FILTER – For NTSC AV images
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y,  P
B, PR signals   “COMPONENT”
R, G, B, HD, VD signals   “RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN 
SELECT”.
Press to select the desired mode.
COMPONENT  RGB
Press to exit from adjust mode.
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL...