Panasonic High Definition Plasma Display Th 103pf10 Operating Instructions

11
Connections
SERIAL Terminals connection
Notes:
•  Use the RS-232C cable to connect the computer to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface specifi cation, so that the Plasma Display can be controlled by a 
computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of control data which...

12
AUDIO 
OUT  Y ,  P 
B ,    P R , 
OUT P
R 
P B 
Y 
L 
R 
COMPONEN T VIDEO OUT 
SLOT3 
P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN 
Connections
COMPONENT / RGB connection
Notes:
•  Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT” 
  (when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 40)
•  Additional equipment, cables and adapter plugs shown are not supplied with this set.
•  SYNC ON G signal is needed. (see page 43)DVD Example...

13
Power ON / OFF 
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display 
with the clamper. (see page 9) 
Connecting the plug to the Wall Outlet.
Note: 
When disconnecting the AC cord, be absolutely sure to disconnect 
the AC cord plug at the socket outlet fi rst.
Press the Power switch on the Plasma Display to turn the set on: 
Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the 
Plasma Display is turned on....

14
Basic Controls
INPUT MENU VOL
ENTER/
+/
-/
Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is displayed:
“+” : press to move the cursor up 
“–” : press to move the cursor down
(see page 16)
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu 
screen will switch. (see page 16)
Normal Viewing PICTURE SETUP
SOUND POS. /SIZE
Main Power On / Off Switch Enter / Aspect button 
(see page 16, 19)
INPUT button
(INPUT1, INPUT2, INPUT3 and PC selection)
(see page 18) Right side...

15
Basic Controls
OFF  TIMER 90
1
2
3 PCNORMAL
Standby (ON / OFF) button
The Plasma Display must fi rst be plugged into 
the wall outlet and turned on at the power switch 
(see page 13).
Press ON to turn the Plasma Display On, from 
Standby mode. Press OFF to turn the Plasma 
Display Off to Standby mode.
SET UP button (see page 16, 17)
SOUND button (see page 26)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” 
input mode selection button to select 
the INPUT mode. (see page 18)
This button is...

16
Normal Viewing PICTURE SETUP
SOUNDPOS. /SIZE
On-Screen Menu Displays
The MENU button on the unit can also be 
pressed.
Each time the MENU button is pressed, the 
menu screen will switch. To PICTURE adjust menu
(see page 24)
To ADVANCED  SETTINGS
(see page 24, 25)Press to select 
“ON”.
Press to enter 
ADVANCED 
SETTINGS.
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
2/2 SET UP 
SCREENSAVER...

17
2  Press to access 
each adjust 
screen.
Press the R button to return 
to previous menu.
Press the R button to return to 
“SET UP” menu. Press to select 
POWER ON TIME / 
POWER OFF TIME.
Press to set up 
POWER ON TIME / 
POWER OFF TIME.
To PRESENT TIME SETUP.
(see page 29)
SYNC
VIDEO NR
SIGNAL
H-FREQ.
V-FREQ.kHz
Hz33.8
60.0
[ 
RGB ]
3 : 2 PULLDOWN
OFF
Block NR
Mosquito NROFFOFFREFRESH RATE100 HzOFF AUTO
3 : 2 PULLDOWN
VIDEO NR
SIGNAL [ 
COMPONENT ]
Block NR
Mosquito NROFFOFFREFRESH RATE
OFF
OFF
100...

18
Initial selections
Selecting the On-Screen Menu Language Selecting the input signal
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
   Selectable languages
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
Select the input signals to be connected by installing the optional Terminal Boards.
Press to select the input signal to be played back...

19
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format 
picture.
Press repeatedly to move through the aspect options:
Notes:
•  For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.
•  For a 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p 
  signal input, the mode is set to “FULL” mode, and switching is not possible.
•  Panasonic AUTO can be...

20
Adjusting POS. /SIZE
0
NORMALNORMALIZE
AUTO SETUP
POS. /SIZE
V-POS
0
H-POS
V-SIZEDOT CLOCKH-SIZE
CLOCK PHASE
1:1 PIXEL MODEOFF
000
0
1Press to display the POS. /SIZE menu.
Press to select AUTO SETUP / H-POS / H-SIZE / V-POS / 
V-SIZE / DOT CLOCK / CLOCK PHASE / 1:1 PIXEL MODE.
Press to adjust POS. /SIZE.
Press to exit from adjust mode.During “VIDEO (S VIDEO)”,
“Digital”, “SDI” and “HDMI” input signal.
During “COMPONENT”, “RGB”
 and “PC” input signal.
3 2
Notes:
•  Unadjustable items are grayed out....