Panasonic High Definition Plasma Display Th 103pf10 Operating Instructions

21
While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION 
( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint (  
 / NORMALIZE 
 Normalization)
Adjusting POS. /SIZE
AUTO SETUPAutomatically adjust H-POS / V-POS / CLOCK PHASE / DOT CLOCK and set H-SIZE / V-SIZE the 
standard value when RGB signal is input.
Notes:
•  If the dot clock frequency is 162 MHz or higher, DOT...

22
ABABAB
BABABA
PC1
VIDEO2PC1
VIDEO2
VIDEO2
VIDEO1PC1
VIDEO2
A
A A
CB
B
B
D
MULTI PIPMULTI PIP
SWAPSWAP
SELECT
SWAP
MULTI PIP
MULTI PIP
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed 
as follows below.
Press to swap main 
picture and sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select the 
picture which you would like to change input modes.
Notes:
•  The sub picture sound is heard while a sub picture 
operation...

23
Advanced PIP
1
2
3
5Press to display the Setup menu.
4
6
Notes:
•  If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
•  Sound output is from the picture which is selected in Audio OUT (PIP) (see page 26).
•  In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•  The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the 
pictures. There may also...

24
2/2
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL
OFF
ON
PICTURE
1/2
25
0
0
0
5
PICTURE
NORMALNORMALIZESTANDARD
BRIGHTNESS
SHARPNESS PICTURE MENU
COLOR PICTURE
TINT
Press to select “ON”.
Press the left    or right     button to switch between modes.
STANDARD
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS 
and PICTURE.
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of 
BRIGHTNESS and PICTURE....

25
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be 
adjusted for “RGB/PC” and “Digital” input 
signal.
•
  You can change the level of each function 
(PICTURE, BRIGHTNESS, COLOR, TINT, 
SHARPNESS) for each PICTURE MENU.
• The “TINT” setting can be adjusted 
for NTSC signal only during “VIDEO 
(S VIDEO)” input signal.
• In PICTURE, there is not a noticeable 
change even when contrast is increased 
with a bright picture or reduced with a dark 
picture.
On the remote...

26
0
0
0
1/2
SOUND
NORMALNORMALIZE
OFF TREBLE
BALANCEBASS
0
MID
SURROUND
MAIN AUDIO OUT (PIP)
SOUND Adjustment
BASS
Adjusts low pitch sounds
MID
Adjusts normal sounds
TREBLE
Adjusts pitch sounds
BALANCE
Adjusts left and right volumes
SURROUND
Select ON or OFF
Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
1
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
2Select to adjust each item.
While...

27
MUTE
Useful when answering the phone or receiving unexpected visitors.
Press this button to mute the sound.
Press again to reactivate sound. Sound is also reactivated when power is turned off or 
volume level is changed.
Notes:
•  This menu is available only when selecting a slot that HD-SDI Terminal Board with audio (TY-FB10HD) is installed.
•  This menu is unavailable when 2-picture display mode is active.
SOUND Adjustment
SURROUND
This menu is displayed when HD-SDI Terminal Board with audio...

28
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following operation state:
  “Multi-viewer” (Picture in Picture, Picture out Picture, Picture...

29
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the Plasma Display ON or OFF.
Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. 
Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select SET UP TIMER or 
PRESENT TIME SETUP.
Press to display the SET UP TIMER screen or 
PRESENT TIME SETUP screen.
1
2
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN...

30
PRESENT TIME SETUP / SET UP TIMER
SET UP TIMER
Press to select 
POWER ON TIME / POWER OFF TIME.
Press to set up POWER ON TIME / POWER OFF 
TIME.
   button: Forward
   button: Back
Notes:
• Pressing “  ” or “  ” button once changes POWER ON TIME / POWER OFF TIME 
1 minute.
• Pressing “  ” or “  ” button continuously changes POWER ON TIME / POWER OFF 
TIME by 15 minutes.
 
Press to select POWER ON FUNCTION 
/ POWER OFF FUNCTION. 
Press to select ON.
Press twice to exit from SET UP.
Note: 
Timer function...