Panasonic High Definition Hospitality Lcd Display Th 32lr11 Operating Instructions

3D Y/C FILTER (NTSC) 
COLOR SYSTEM 
SIGNAL 
ON 
AUTO 
3 : 2 PULLDOWN 
Panasonic AUTO (4 : 3)  OFF 
4:3
[  VIDEO  ] 
3 : 2 PULLDOWN 
OFF 
XGA MODE1024 × 768
31
3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions...

ADVANCED NR[ 
VIDEO ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR[ 
Digital ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR[ 
COMPONENT ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR[ 
RGB ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
()NOISE REDUCTION
OFF 
()NOISE REDUCTION
ADVANCED
32
VIDEO NR:        Automatically reduces unwanted picture noise.
MOSQUITO NR:Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR:      Reduces block noise when playing MPEG videos.
Notes:
•...

SYNC
SIGNAL[ 
RGB ]
3 : 2 PULLDOWN
XGA MODEAUTO
OFF
1024 × 768
SYNC
AUTO
SYNC
ON G
SYNC
VBS
H-FREQ.
V-FREQ.kHz
Hz 63.98
60.02
SIGNAL FORMAT 1280×1024/60
33
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
SYNC
Setting RGB sync signal
Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT 
signal).
AUTO:  The H and V sync or synchronized signal are automatically selected. 
If both input, it is selected the H and V sync.
ON  G:  Uses a...

Options 
Weekly Command Timer 
1/3 
 
Initial INPUT  Onscreen display On 
O f f 
Off Off
0 0Maximum VOL level Initial VOL levelOffINPUT lockOffButton lockOffRemocon User levelOffAdvanced PIP
Options 
Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID 
2/3 
 
3/3 Options 
O f f 
Off
Off Clock Display
All Aspect
Slot1 Serial Slot Select Slot power Off
Power On Screen Delay
34
1
2
3
5Press to display the SET UP menu.
4
6
Item Adjustments
Weekly Command TimerSets...

35
Item Adjustments
INPUT lockOff   PC   INPUT1   INPUT2   INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 13).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be fi xed as the value input in 
the single screen display mode.
• When a dual input terminal board is attached, A or B is displayed depending on...

36
Item Adjustments
Power On Screen 
DelayOff   1   2   3....   30
You can set the power-on delay time of the displays to reduce the power load, when you press POWER switch 
to turn on the multiple displays that are set together. 
Set each display’s setting individually.
Off:      The display will be turned on at the same time as POWER switch is pressed.
1 to 30 (sec.):Set the power-on delay time (second).After pressing POWER switch, the display will be powered on with time delay depending on this...

Options 
On Weekly Command TimerOnscreen display 
1/3 
 
Weekly Command Timer 
Program1MondayOnFunction
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
yProgram3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 0102
1/8
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12 PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
20:00 
20:30 57 
58 
8/8 
 
22:00 59 --:-- 60 --:--...

Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
1/2
SIGNAL
PC
OFF
STANDBY SAVEOFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
SHIPPING YES 
38
This function allows you to reset the unit to the factory setting.
Shipping condition
1
2
3
4Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press and hold till the...

39
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote control.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote...

40
List of Aspect Modes
Aspect mode
Picture
 Enlarged screenDescriptionAll Aspect: 
OnFactory setting
All Aspect: Off
16:9 FULL
The display of the pictures fi lls the screen.
In the case of SD signals, pictures with a 4:3 aspect ratio are 
enlarged horizontally, and displayed. This mode is suited to 
displaying anamorphic pictures with a 16:9 aspect ratio.
14:9 –
Letterbox pictures with a 14:9 aspect ratio are enlarged 
vertically and horizontally so that their display fi lls the 
screen vertically and is...