Panasonic High Definition Hospitality Lcd Display Th 32lr11 Operating Instructions

SERIAL
6789 13452
11
Connections
SERIAL Terminals connection
Notes:
•  Use the RS-232C straight cable to connect the computer 
to the Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied 
with this set.
The SERIAL terminal conforms to the RS-232C interface 
specifi cation, so that the Display can be controlled by a 
computer which is connected to this terminal.
The computer will require software which allows the 
sending and receiving of...

POWER
12
Power ON / OFF 
Connecting the plug to the Wall Outlet.
Press the Power switch on the Display to turn the set on: Power-On.
Power Indicator: Green
Press the  button on the remote control to turn the Display off.
Power Indicator: Red (standby) 
Press the 
 button on the remote control to turn the Display on.
Power Indicator: Green
Turn the power to the Display off by pressing the POWER switch on the unit, when 
the Display is on or in standby mode.
Note:
During operation of the power management...

1/2
SIGNAL
PC
OFF
STANDBY SAVEOFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
POWER
INPUT M
13
Initial selections
Selecting the On-Screen Menu Language Selecting the input signal
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
 Selectable languages Select the input signals to be connected by installing the optional Terminal Boards.
Press to select the input signal to be...

POWER
INPUT MENUENTER/
v–/
z+/
xVOL
14
Basic Controls
How to release button lock
MENU and ENTER/
v buttons are locked 
before shipping.
You can unlock them with unit buttons.
1. Press +/
x 4 times.
2. Press INPUT 4 times.
3. Press –/
z 4 times.
4. Press ENTER/
v.
Note:
After unlocking the buttons, Button lock 
in OPTIONS menu is set to “Off”. 
(see page 35) MENU Screen ON / OFF
This button is locked by initial setting.
Each time the MENU button is pressed, the 
menu screen will switch. (see page 20)...

15
Basic Controls
POWER button
The Display must fi rst be plugged into 
the wall outlet and turned on at the power 
switch (see page 12).
Press this button to turn the Display On, 
from Standby mode. Press it again to turn 
the Display Off to Standby mode. ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect. 
(see page 16)
POS. /SIZE button 
(see page 21)
PICTURE button
(see page 22)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound....

INPUT MENUENTER/■–/▼ +/▲VOL
16
ASPECT Controls
The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
Press repeatedly to move through the aspect options:
For details about the aspect mode, please see “List of Aspect Modes” (page 40). 
Panasonic AUTO
The display will automatically become enlarged (depending on the picture source), allowing you to view the picture at its maximum size.
Panasonic AUTO416
39Notes:
• Panasonic AUTO mode is...

A B  A B A B 
B A B A B A 
PC1 
VIDEO2 PC1 
VIDEO2 
VIDEO2 
VIDEO1 PC1 
VIDEO2 
A 
A  A 
C B 
B 
B 
D 
17
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed as follows below.
Press to swap main picture and 
sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select the 
picture which you would like to change input modes.
Notes:
•  The sub picture sound is heard while a sub picture 
operation is underway.
• The sub picture...

18
MULTI PIP
Advanced PIP
Notes:
•  If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
•  Sound output is from the picture which is selected in AUDIO OUT (PIP) (see page 24).
•  In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•  The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the 
pictures. There may also be a difference in the picture...

INPUT MENUENTER/■–/▼ +/▲VOL
2
EXIT
2
1
EXIT
×1×2×3×4
19
VOL button
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following operation state:...

2/2 
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL AIOFF
OFF
ON
PICTURE 
0 
NORMAL NORMALIZE 
AUTO SETUP
POS. /SIZE 
V-POS 
0 
H-POS 
V-SIZE DOT CLOCK H-SIZE 
CLOCK PHASE 
0 0 0 
0 
0 
0 
2.2  BLACK EXTENSION 
AGC  GAMMA  INPUT LEVEL 
ADVANCED SETTINGS 
NORMAL NORMALIZE 
OFF 
1/2
SIGNAL
SET UP
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
2/2 SET UP 
SET UP TIMERPRESENT TIME SETUPSIDE BAR ADJUSTBRIGHT
0 
0...