Panasonic Hdtv Monitor Ct 30wx15n Operating Instructions

							HDTV Monitor
Operating Instructions
Écran à haute définition
Manuel d’utilisation
TQB2AA0528-2 50331
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS
CT-30WC15
CT-30WX15
CT-34WC15
CT-34WX15CT-26WC15
CT-26WX15 
						

							ENGLISH
The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.The lightning flash with arrow head
within a triangle is intended to tell the
user that parts inside the product
constitute a risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING:   TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.  DO NOT PLACE ANY OBJECTS FILLED WITH 
LIQUIDS, SUCH AS VASES, ON THIS APPARATUS.
The Class II insulation symbol (square within a square) indicates that this product has been evaluated 
and tested to comply with Class II insulation requirements.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet. 
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING:  TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2005 by Panasonic Corporation of North America. All rights
reserved. Unauthorized copying and distribution is a violation of law.  
						

							IMPORTANT INFORMATION
1z
ENGLISH
Important Information
The Energy Star label, a symbol for energy efficiency, was created by the U.S. 
Environmental Protection Agency (EPA) and the U.S. Department of Energy 
(DOE) to help customers identify products that can save them money and protect 
the environment by saving energy. Energy Star compliant products generally 
consume less energy than similar standard products.
HDMI,the HDMI logo and High Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.
Important Information Regarding the Use of Video Games, Computers, or Other Fixed 
Image Displays
WARNING: The marking or retained image on the picture tube resulting from viewing a fixed image
is not an operating defect and as such is not covered by Warranty. 
The television is designed to display constantly moving images on the screen. Continuous viewing of
stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non-
expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image),
stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed
scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.
The extended use of fixed image program material can cause permanent picture tube damage, shown as
a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be
limited by performing the following steps:
• Limit the display of fixed image program material to no more than 15% of total viewing time per week.
• Turn the power off when not in use. FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY
APPROVED BY PANASONIC CORPORATION OF NORTH AMERICA COULD CAUSE
HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO
OPERATE THIS EQUIPMENT.
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and
5736897. BBE and BBE symbol are registered trademarks of BBE
Sound, Inc.
BBE High Definition Sound restores clarity and presence for better speech
intelligibility and music realism. 
High Definition Sound
WARNING: KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN.
THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIALS AND
PLASTIC SHEET. 
						

							2z
IMPORTANT INFORMATION
ENGLISH
FCC INFORMATION
This equipment has been tested and found to comply with
the limits for a TV Broadcast Receiver in accordance with
Part 15 of the FCC Rules. The limits are designed to
provide reasonable protection against radio and television
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause interference to radio or
television reception (which you can determine by turning
the equipment off and on), try to correct the interference by
one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help. 
						

							TABLE OF CONTENTS
3z
ENGLISH
REMOTE CONTROL  SECTION   
WARRANTY AND SERVICE CENTER  SECTION
Remote WarrantySECCIÓN DE CONTROL REMOTORemoto
SECCIÓN DE GARANTÍA Y CENTRO DE SERVICIOGarantía
Table of Contents
Important Information ..................................... 1
Information Regarding The Use Of Video Games
Computers, Or Other Fixed Image Displays ............    1
FCC Information .........................................................    2
Customer Record........................................................    4
Care and Cleaning ......................................................    4
Specifications..............................................................    4
Feature Chart..............................................................    4
Installation ........................................................ 5
Television Location .....................................................    5
Optional Cable Connections .......................................    5
AC Power Supply Cord ...............................................    5
Cable / Antenna Connection .......................................    5
Remote Control Battery Installation ............................    5
Initial Set Up Menu........................................... 6
Optional Equipment Connections .................. 7
VCR ...........................................................................     7
Cable Box ..................................................................     7
VCR and Cable Box...................................................     7
Front Control Panel.....................................................    8
Amplifier (TO AUDIO AMP) ........................................    8
Digital TV - Set-Top Box (DTV-STB) or 
DVD Players ............................................................    8
Program Out connection .............................................    9
HDMI  (High Definition Multimedia Interface) input 
connection ...............................................................    9
Special Features .............................................10
ASPECT Button ..........................................................  10
BBE Button .................................................................  10
SAP Button .................................................................  10
Direct Video Input Selection .......................................  10
Basic Menu Navigation.................................  11
Icon Menus Operation ..................................  12
Picture ........................................................................   12
Audio ..........................................................................   12
Channels ....................................................................   13
Timer ..........................................................................   14
Lock ............................................................................   14
V-Chip Set ...............................................................   14
Set Up ............................................................................   17
Troubleshooting Chart .................................  25
Index...............................................................  26
Manual de instrucciones [Resumen]
Felicidades................................................................  20
Instalación de Pilas en el Control Remoto.............  20
Programación Inicial................................................  20
Conexiones de Equipo Opcional............................  21
Conexión de la Videocasetera ...............................  21
Conexión del Decodificador de Cable....................  21
Conexiones del Decodificador de Cable y
 Videocasetera .....................................................  21
Panel de Control Frontal ........................................  22
Conexión del Amplificador de Sonido....................  22
Conexión del Decodificador de Televisión Digital 
(DTV-STB) ó DVD ................................................  22
Conexión de Salida del Programa (PROG OUT)...  23
Conexión de entrada HDMI ...................................  23
Navegación básica del menú..................................  24 
						

							4z
CONGRATULATIONS
ENGLISH
Congratulations
Your new Panasonic Tau Television features state-of-the-
art technology for high quality picture and sound with
complete audio/video connections for your home theater
system. Your TV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at:www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
• Use a mild soap solution or window cleaner and a clean
cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Warning:Do not spray any type of cleaning fluid directly on the
screen.
Cabinet and Remote Control
• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
• Do not use benzene, thinner or other petroleum based
products.
Specifications
Specifications are subject to change without notice or
obligation.   
Feature Chart
Power Source
CT-26WC15  CT-26WC15U (3.1A)
CT-26WX15  CT-26WX15U (3.1A)
CT-30WC15  CT-30WC15U (3.1A)
CT-30WX15  CT-30WX15U (3.1A)
CT-34WC15  CT-34WC15U (3.3A)
CT-34WX15  CT-34WX15U (3.3A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks500mV RMS 47K Ohm
 Video out jack1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
HDMI/HDCP Input jackType A
Component Input (Y / PB/ PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector
MODELS
CT-26WC15 
CT-26WX15 
CT-30WC15 
CT-30WX15 
CT-34WC15 
CT-34WX15 
FEATURES
MENU LANGUAGE 
ENG/SPAN/FR••••••
CLOSED CAPTIONING••••••
V-CHIP CAPABILITY ••••••
DIGITAL SCAN RATE 1080i, 
480p1080i, 
480p1080i, 
480p1080i, 
480p1080i, 
480p1080i, 
480p
NTSC LINE-DOUBLER 480p480p480p480p 480p 480p
GEOMAGNETIC / TILT 
CORRECTIONTilt 
only Tilt 
only ••••
PROGRESSIVE CINEMA 
SCAN 3/2 PULLDOWN••••••
VIDEO NORM••••••
AUDIO NORM••••••
STEREO••••••
AI SOUND••••••
BASS/BALANCE/TREBLE••••••
SURROUND••••••
BBE••••••
A/V IN (REAR/FRONT)3
 (2/1)4
 (3/1)3
 (2/1)4
 (3/1)3
 (2/1)4
 (3/1)
AUDIO OUT••••••
HDMI/HDCP INPUT••••••
 S-VIDEO INPUT 
(REAR/FRONT)1
 (1/0)2
 (2/0)2
 (1/1)3
 (2/1)2
 (1/1)3
 (2/1)
COMPONENT VIDEO 
INPUT     2     2     2     2      2      2 
						

							INSTALLATION
5z
ENGLISH
Installation
Television Location
This unit can be used as part of an entertainment center. Consult
your dealer for available options.
• Avoid excessive sunlight or bright lights, including
reflections.
• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
• Fluorescent lighting may reduce remote control
transmitting range.
• Keep away from magnetic equipment, including motors,
fans and external speakers.
WARNING: Use this television receiver only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. In order to
avoid injury to children, never place your television receiver on a
piece of furniture that is capable of being tilted by a child leaning
on it, pulling on it, standing on it, or climbing on it. A falling
television can cause serious injury or even death.  
CT-34WC15, CT-34WC15U:
CAUTION: This television receiver for use only with
PANASONIC TY-34WX15T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
CT-34WX15, CT-34WX15U:
CAUTION: This television receiver for use only with
PANASONIC TY-34WX15T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output connectors that match
your component connectors.
• Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.
Cable Connection
Connect the cable supplied by your local
cable company. Tighten with fingers only.
Use of any tool (e.g. pliers) for tightening
may result in tuner damage.
Note:A cable converter box may be
required for proper reception.
Check with your local cable
company for compatibility requirements.
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna
is required. For best reception an outdoor antenna is
recommended.
• Connect home antenna to ANT
connection on back of television. 
Note:Cable Mode is preset at the 
factory.  Antenna mode can be 
selected in the Set Up sub-menu.
Remote Control Battery Installation
Requires two AA batteries (supplied).
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the cover
and sliding it off in the direction indicated.
2. Install batteries matching (+) and (-) polarity signs.
3. Replace the battery cover by sliding it in reverse until
the lock snaps.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control.
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon with alkaline).
• Do not recharge, heat, short-circuit, disassemble, or
burn batteries.
Polarized plug75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
1
AA / 1.5A
AA / 1.5A
Battery Polarity
2
AA / 1.5A
AA / 1.5A
3 
						

							6z
INITIAL SET UP MENU
ENGLISH
Initial Set Up Menu
For your convenience, Initial Setup menu will be displayed
on screen when the set is turned on for the first time. If
needed, follow the menus and procedures for setting up the
features.
IDIOMA/LANGUE
To change menu language to ENGLISH, SPANISH or
FRENCH.
Procedure
• Press VOLX to select English, Spanish or French.  
MODE
To select TV (antenna) or CABLE mode depending on the
input signal source. 
Procedure
• Press CHT to select MODE.
• Press VOLX to select TV or CABLE.   
AUTO PROGRAM
To automatically program all channels with a signal.
Procedure
• Press CHT to select AUTO PROG.
• Press VOLX to start Auto Programming. 
Note:To ensure proper channel programming, wait until AUTO
PROG. automatically stops the scan.
TILT CORRECTION
This feature is used to adjust the tilt of the picture due to
the earth’s magnetic field in the area. Procedure
• Press CHT to select TILT CORRECTION.
• Press VOL X to display adjustment menu.
• Press WVOLorVOL X to adjust picture tilt.
GEOMAGNETIC CORRECTION
This feature is used to adjust discoloration of the picture
due to the earth’s magnetic field in the area.
Procedure
• Press CHT to select GEOMAGNETIC CORRECTION.
• Press VOL X to display adjustment menu.
• Press WVOLorVOLX to adjust discoloration in
picture.
Note:Geomagnetic Correction is not available in models
CT-26WC15 and CT-26WX15.
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SETUP
IDIOMA/LANGUE
MODE
AUTO PROGRAM 
TILT CORRECTION
GEOMAGNETIC CORRECTION ENGLISH

CABLE

   





PRESS ACTION TO  EXIT
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SETUP
IDIOMA/LANGUE
MODE
AUTO PROGRAM 
TILT CORRECTION
GEOMAGNETIC CORRECTION ENGLISH

CABLE

   





PRESS ACTION TO  EXIT
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SETUP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
TILT CORRECTION
GEOMAGNETIC CORRECTION ENGLISH

CABLE

   





PRESS ACTION TO  EXIT
            TILT CORRECTION
0
TO ADJUST

   PRESS      ACTION 
           TO      EXITFIRST PLEASE
CONNECT THE ANTENNA
INITIAL SETUP
IDIOMA/LANGUE
MODE
AUTO PROGRAM 
TILT CORRECTION
GEOMAGNETIC CORRECTION ENGLISH

CABLE

   





PRESS ACTION TO  EXIT
GEOMAGNETIC CORRECTION
- - - - - - - - - - - - - - - - - -
0
TO ADJUST

PRESS ACTION TO EXITl
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SETUP
IDIOMA/LANGUE
MODE
AUTO PROGRAM 
TILT CORRECTION
GEOMAGNETIC CORRECTIONENGLISH

CABLE

   





PRESS ACTION TO  EXIT 
						

							OPTIONAL EQUIPMENT CONNECTIONS
7z
ENGLISH
Optional Equipment Connections
Note:The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection 
Follow this diagram when connecting your television to a
VCR only. 
Note:Rear A/V jacks may vary, depending on model. Please
refer to the FEATURE CHART on page 4 for your
model’s capabilities.
Viewing a television program
Procedure
• Tune the television to the program you want to view.
Viewing a video tape
Procedure
ˆOption A
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Begin to play the video tape.
ˆOption B
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Begin to play the video tape.
Recording a television program
Procedure
ˆOption A (Recording and viewing the same program)
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
ˆOption B (Recording one program while viewing another
program)
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.) to which
your VCR is connected.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
• Press the TV/VIDEO button on the remote control to
switch back to TV mode.
• Tune the television to the program you want to view. 
Cable Box Connection
Follow this diagram when connecting your television to a
cable box only.  
Note:Rear A/V jacks may vary, depending on model. Please
refer to the FEATURE CHART on page 4 for your
model’s capabilities.
Viewing a premium (scrambled) cable channel
Procedure
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
VCR and Cable Box Connection
Follow this diagram when connecting your television to
both a VCR and a cable box. 
Note:Rear A/V jacks may vary, depending on model. Please
refer to the FEATURE CHART on page 4 for your
model’s capabilities.
Viewing a premium (scrambled) cable channel
Procedure
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
Recording a premium (scrambled) cable channel
Procedure
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.) for your
VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of  the VCR.
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
ANT  IN ANT  OUT
VIDEO OUT
AUDIO OUT L
R
PLAY
STOP R
E
WFFVCR
TERMINALS ON BACK OF TELEVISION
Incoming
Cable
S-VIDEO
COMPONENT
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
P
B
PR

L
R
AV IN
231
HDMI
INPUT INPUT
ANT IN ANT  OUT
15CABLE BOX
Incoming
Cable
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
TERMINALS ON BACK OF TELEVISION
S-VIDEO
COMPONENT
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
P
B
PR

L
R
AV IN
231
HDMI
INPUT INPUT
ANT OUT ANT  IN
15
CABLES NOT INCLUDED
ANT  IN ANT  OUT
VIDEO OUT
AUDIO OUT L
R
PLAY
STOP R
E
WFFVCR
TERMINALS ON BACK OF TELEVISION
Incoming
CableCABLE BOX
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
S-VIDEO
COMPONENT
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
P
B
PR

L
R
AV IN
231
HDMI
INPUT INPUT 
						

							8z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
VCR and Cable Box Connection (Cont.)
Recording a premium (scrambled) cable channel
Procedure (cont.)
• Using your cable box, tune to the premium cable channel
you want to record.
• Begin recording.
ˆTo view a different channel while recording:
• Press the TV/VIDEO button on the remote control to
select TV mode.
• Tune the television to a program (except another
premium cable channel).
Front Control Panel
The front control panel can be used to operate the television
when the remote control is not available.
Note:The ON/OFF indicator LED (red) will be lit when the set
is on. 
A second VCR, Camcorder, a video disc player, video game
equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select front VIDEO input
mode.
• Operate optional equipment as instructed in equipment
manual.
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an
external audio amplifier to TO AUDIO AMP outputs on back
of television.
Note:TO AUDIO AMP terminals cannot be connected directly
to external speakers.  
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu. 
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
• Volume, mute, bass, treble and balance are now
controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Digital TV - Set-Top Box (DTV-STB) or DVD 
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB or DVD player to
the back of your television.   
Note:There are three video input jacks, Y, PB, and PR.
Separate component color inputs provide luminance and
color separation. Use the L (left) and R (right) audio
inputs.
POWER
 VOLUME CHANNEL ACTION TV/VIDEO VIDEO L - AUDIO - RINPUT 4
VIDEO 4 L - AUDIO - RS-VIDEO
ACTIONCH
CH  VOLVOL 
TV/VIDEO POWERBBE
Front Panel for 30" and 34" models Front Panel for 26" models
Power ON/OFFInfrared sensor
ON/OFF
indicator
ON/OFF
indicator
Infrared sensorPower ON/OFF
PLAY
STOP R
E
WFFVCRPalmcorderVIDEO GAME
CONSOLE
AV OUTR - AUDIO - L VIDEO
S-VIDEO
VIDEO 4 L - AUDIO - RS-VIDEO

Note:Front AV jacks labelling may vary depending on
model. Please refer to the FEATURE CHART on
page 4 for your model’s capabilities.
90.7 MHZ
EXTERNAL AMPLIFIER
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
TERMINALS ON BACK OF TELEVISION
S-VIDEO
COMPONENT
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
PB
PR

L
R
AV IN
231
HDMI
INPUT INPUT
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
TERMINALS ON BACK OF TELEVISION
S-VIDEO
COMPONENT
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
PB
PR

L
R
AV IN
231
HDMI
INPUT INPUT
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
R-AUDIO-L - VIDEO  S-VIDEONTSC OUTPUT
Y
PBPRMAIN
VIDEODIGITAL TV OUTPUT
L-AUDIO-R