Panasonic Hdc Tm900 Owners Manual

41VQT3K69
1Change the mode to  .
2Touch the play mode select icon A. (l30)
3Select the [MEDIA] and [VIDEO/PICTURE] 
you wish to play back.
4Touch the scene or the still picture to be 
played back.
B is displayed when [1080/60p] is touched,   is 
displayed when [AVCHD] is touched or   is displayed 
when [iFrame] is touched in step 3.
≥ To display the next (previous) page:
jSlide the thumbnail display upward (downward) while touching it.
j Switch the Touch Menu, and then touch   (up)/  (down) on the...

42VQT3K69
5Select the playback operation by touching the operation icon.
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in 
the following order if the zoom lever or zoom buttons are operated to 
 side or   side.
20 scenes  () 9 scenes  () 1 scene  () Highlight&Time frame 
index* ( l90)
* Highlight&Time frame index can only set in Motion Picture  Playback Mode.
Even in Motion Picture Playback Mode, [F ACE] and [HIGHLIGHT] cannot be used when 
[iFrame] is...

43VQT3K69
∫Speaker/Headphone 
volume adjustment
Operate the volume lever or the zoom 
buttons to adjust the speaker/
headphone volume during Motion 
Picture Playback Mode.
To w a r d s  “ r”:
Increases the volume
To w a r d s  “ s”:
Decreases the volume
≥ Sound will be heard only during normal play back.
≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails.
≥ The elapsed time for playback indication will be reset to 0h00m00s for each scene.
≥ When playing back iFrame scenes,...

44VQT3K69
≥Touch   (left side)/  (right side) of   on the Touch Menu to display  . ( l30)
1Touch [MENU].
2Touch the top menu  A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause function descriptions and 
settings confirmation messages to appear.
≥After the messages have been displayed, 
the guide display...

45VQT3K69
Using the quick menu
This allows quick setting of some of the menus.
≥Touch   (left side)/  (right side) of   on the Touch Menu to display  . ( l30)
1Touch [Q.MENU].The following menus can be set. Touch the desired menu.
≥The items displayed differ depending on the position of the mode switch or settings.
2Touch the desired item to enter the setting.
3Touch [EXIT] to exit the quick menu.
IconFunctionPage
[REC MODE] l67
/ [PICTURE SIZE]
l78
[POWER LCD] l49
[GUIDE LINES] l65
[MIC LEVEL] l75
[MF...

46VQT3K69
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
Please refer to page 31.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l31)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] 
and proceed to Step 3.
2(Only when setting your home...

47VQT3K69
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight 
saving time.   appears and the 
summer time setting is turned on. The 
travel destination time and time difference 
from the home region time are set forward 
by one hour. Touch [SUMMER TIME SET] 
again to return to the normal time setting.
≥ Close the setting by touching [EXIT].   
appears and the time of the travel destination...

48VQT3K69
The unit is put into recording pause approx. 1 second when the unit is turned on with the 
mode set to   or  .
≥Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick power on mode, the zoom magnification becomes 1 k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened 
or the viewfinder is extended.
≥ When in Quick start standby mode about 80% of the power used in Recording pause 
mode is being consumed, so the...

49VQT3K69
The recording lamp lights up during recording and flashes when the unit receives a signal 
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it 
does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed 
with this sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l141)
This makes it easier to view the LCD monitor in...

50VQT3K69
It adjusts the brightness of the viewfinder.
≥These settings will not affect  the images actually recorded.
1 Extend the viewfinder and open the LCD 
monitor.
2Touch [
EVF SET].≥ The viewfinder turns on.3 Touch  /  to adjust the setting.≥Adjust while checking the picture in the viewfinder.4 Touch [ENTER].≥Touch [EXIT] to complete the setting.
Please refer to page 106.
Please refer to page 106.
Please refer to page 106.
Please refer to page 107.
Please refer to page 105.
Please refer to page...