Panasonic Hdc Tm900 Owners Manual

21VQT3K69
∫About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBN130/VW-VBN260.
≥The unit has a function for distinguishing batteries which can be used safely. The 
dedicated battery (VW-VBN130/VW-VBN260) supports this function. The only 
batteries suitable for use with this unit are genuine Panasonic products and 
batteries manufactured by other companies and certified by Panasonic. (Batteries 
which do not support this function cannot be used). Panasonic...

22VQT3K69
Charging the battery
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. 
Also, do not use the AC cable from other equipment with this unit.
≥ The battery can also be charged using a battery charger (VW-BC20PP; optional).
≥ The battery will not be charged if the unit is turned on.
≥ It is recommended to charge the battery in a temperature between 10 °C to 30 °C 
(50 °F to...

23VQT3K69
Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
HDC-TM900
Battery model number
[Voltage/Capacity  (minimum)]Charging timeRecording modeMaximum 
continuous 
recordable timeActual 
recordable  time
Supplied battery/
VW-VBN130 (optional) [7.2 V/1250 mAh] 2h30min[1080/60p]
1h30min
(1h25min) 55 min
(55 min)
[HA] 1h35min
(1h30min) 1h
(55 min)
[HG], [HX], 
[HE] 1h35min...

24VQT3K69
HDC-HS900
Battery model number
[Voltage/Capacity  (minimum)]Charging timeRecording 
destinationRecording  modeMaximum 
continuous  recordable  timeActual 
recordable  time
Supplied battery/
VW-VBN130 (optional)
[7.2 V/1250 mAh] 2h30minHDD
[1080/60p]
1h15min
(1 h 10 min)45 min
(45 min)
[HA], [HG],  [HX], [HE] 1h20min
(1 h 15 min)50 min
(45 min)
[iFrame] 1h20min
(1 h 20 min)50 min
(50 min)
SD [1080/60p]
1h15min
(1 h 15 min)45 min
(45 min)
[HA], [HG]  1h20min
(1 h 20 min)
50 min
(45 min)
[HX],...

25VQT3K69
≥These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. 
Charging time and recordable time vary depending on the usage conditions such as 
high/low temperature.
≥ Recordable time of 3D recording mode is the same.
(During 3D recording mode, 1080/60p and iFrame recording mode cannot be used.)
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping 
recording, turning the unit on/off, moving the zoom...

26VQT3K69
The unit can record still pictures or motion pictures to an SD card, built-in memory or HDD. 
To record to an SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for 
motion picture recording.
* SD Speed Class Rating is the speed  standard regarding continuous writing. 
Check via the label on the card, etc.
≥Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC 
Memory Cards...

27VQT3K69
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card/terminal 
cover and insert (remove) the 
SD card into (from) the card 
slot.
≥Face the label side  B in the direction 
shown in the illustration and press it 
straight in as far as it will go.
≥ Press the center of the SD card and then 
pull it straight out.
3Securely close the SD card/
terminal cover.
≥Securely close it until it clicks.
≥Do not touch the terminals on the...

28VQT3K69
You can turn the unit on and off using the power button, the LCD monitor or the viewfinder.
Turning the unit on and off with the power button
Press the power button to turn on the unit.
AThe status indicator lights on.
Turning the unit on and off with the LCD monitor/
viewfinder
Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD 
monitor/viewfinder turns off the unit.
During general use, you may find it convenient to turn the unit on/off using the LCD...

29VQT3K69
≥In the following cases, opening the LCD monitor or extending the viewfinder does not turn 
on the unit. Press the power button to turn on the unit.
jWhen the unit is  originally purchased
j When you have turned off the unit using the power button
Change the mode to recording or playback.
Operate the mode switch to change the mode to  ,   or  .
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed...

30VQT3K69
∫Slide while touching
Move your finger while pressing on the touch 
screen.
∫About the operation icons
///:
These icons are used to switch the menu and thumbnail 
display page, for item selection and setting etc.
:
Touch to return to the previous screen such as when 
setting menus.
About the Touch Menu
Touch   (left side)/  (right side) of   on the Touch Menu to switch the operation icons.
Touch   (left side)/  (right side) of   on the Touch Menu.≥ It is also possible to switch the operation...