Panasonic Hdc Tm900 Owners Manual

141VQT3K69
Major confirmation/error messages to be indicated on the screen in text.
*1  only
*2  only
Others
Messages
PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*1/
RECOMMEND DATA BACK UP PERIODICALLY.*2
We recommend backing up important recorded motion pictures and still pictures 
periodically to a PC, DVD disc etc. to protect it. ( l113, 125) This message does not 
indicate that there is a problem with this unit.
HDD BACKUP RECOMMENDED.*2
There is a possible problem with the HDD. Copy the...

142VQT3K69
About recovery
If faulty management information is found, the messages may appear and a repair is 
performed. (Repairing may take time depending on the error.)
≥The above message is displayed when abnormal management information is detected 
when the scenes are displayed in thumbnail. To perform the repair, touch the scene with 
 in the thumbnail, and start the playback. Please be aware that if the repair fails, 
scenes with   will be deleted.
≥ Use a sufficiently charged battery or the AC...

143VQT3K69
Others
Troubleshooting
Power
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly. ≥
Charge the battery again to ensure it is sufficiently 
charged. ( l22)
≥ In cold places, the battery using time becomes shorter.
≥ The battery has a limited life. If the operating time is still 
too short even after the battery is fully charged, the 
battery has worn out and needs to be replaced.
This unit is turned off 
automatically. ≥
If the...

144VQT3K69
Indication
ProblemCheck points
Remaining battery 
indication is not 
displayed properly. ≥
The remaining battery capacity indication is an 
approximation.
If the remaining battery capacity indication is not 
displayed correctly, fully charge the battery, discharge it 
and then charge it again.
Recording
ProblemCheck points
The unit arbitrarily stops 
recording. ≥
Use an SD card that can be used for motion picture 
recording. ( l26)
≥ The recordable time may have shortened due to the...

145VQT3K69
Object seems to be 
warped.≥
Object seems to be warped slightly when the object 
moves across the image very fast, but this is because the 
unit is using MOS for the image sensor. This is not a 
malfunction.
Playback
ProblemCheck points
Scenes/still pictures 
cannot be played back. ≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
Scenes cannot be 
deleted. ≥
Release the protect setting. (l 99)
≥ Any scenes/still pictures where the thumbnails are...

146VQT3K69
With other products
ProblemCheck points
VIERA Link does not 
work. (Setting on this unit)
≥
Connect with a HDMI mini cable (optional). ( l107)
≥ Touch [MENU], then touch [SETUP]  # [VIERA Link]  # 
[ON]. ( l107)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the 
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the 
connected...

147VQT3K69
∫If scenes do not change smoothly when played back on another 
device (AVCHD, 1080/60p)
The images may be still for several seconds at  the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions...

148VQT3K69
Keep this unit as far away as possible 
from electromagnetic equipment (such 
as microwave ovens, TVs, video games 
etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥ Recorded data may be damaged, or 
pictures may be distorted, by strong 
magnetic fields created by...

149VQT3K69
Do not use the unit for surveillance 
purposes or other business uses.
≥This unit was designed for consumer 
intermittent use. It was not intended for 
continuous use, or for any industrial or 
commercial application resulting in 
prolonged use.
≥ In certain situations, continuous use could 
cause the unit to overheat and cause a 
malfunction. Such use is strongly 
discouraged.
When you are not going to use the unit 
for an extended time
≥ When storing the unit in a cupboard or 
cabinet, it is...

150VQT3K69
≥Extremely high temperatures or low 
temperatures will shorten the life of the 
battery.
≥ If the battery is kept in high-temperature, 
high-humidity, or oily-smoky places, the 
terminals may rust and cause 
malfunctions.
≥ To store the battery for a long period of 
time, we recommend you charge it once 
every year and store it again after you 
have completely used up the charged 
capacity.
≥ Dust and other matter attached to the 
battery terminals should be removed.
Prepare spare batteries...