Panasonic Hdc Tm900 Owners Manual

101VQT3K69
You can combine the relayed scene (l69) in the built-in memory and the continued 
scene in the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay recording
≥ Change the mode to   and touch the play mode select icon. Then set [MEDIA] to 
[SD CARD] or [Built-inMemory], and set [VIDEO/PICTURE] to [1080/60p] or [AVCHD]. 
(l 41)
1Insert the SD card that was used for Relay recording.
2Select the menu.
3When the confirmation message appears, touch [YES].
≥Scene in the...

102VQT3K69
To cancel relay information
≥When the relay information is canceled, combining of the relayed scenes will not be 
possible anymore.
≥When the disc playback is selected while a DVD burner (optional) is connected, you cannot 
combine relay scenes or cancel relay information.
≥ The personal information of the relayed scene in the built-in memory or SD card is deleted, 
the personal information of the combined relay scene is deleted. : [EDIT SCENE] 
# [RELAY INFO CANCEL]
Combining of the relay...

103VQT3K69
≥Use the AV multi cable (supplied) or HDMI mini cable (optional) and check the output 
settings. ( l106)
≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high 
definition TV and then play back the recorded high definition images, you can enjoy them 
in high resolution with high quality sound.
1Connect this unit to a TV.
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible with the terminals....

104VQT3K69
≥Check that the plugs are inserted as far as they go.
≥ Always use a genuine Panasonic HDMI mini  cable (RP-CDHM15, RP-CDHM30; optional).
≥ Do not use any other AV multi cables except the supplied one.
≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable 
is not required.
≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug 
of the AV multi cable. Image may not display when the component terminal plug is 
connected...

105VQT3K69
∫To watch images on a regular 
TV (4:3) or when both sides of 
the images do not appear on 
the screen
Change the menu setting to display the 
images correctly. (Check the TV setting.)
Example of images with a [16:9] aspect 
ratio on a regular TV (4:3)
≥If a wide-screen TV is connected, adjust 
the aspect setting on the TV. (Refer to the 
operating instructions of the TV for 
details.)
∫ To display the on-screen 
information on the TV
When the EXT DISPLAY button on the 
remote control is...

106VQT3K69
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on information from the 
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method 
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please 
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
jWhen the 1080/60p...

107VQT3K69
¬Change the mode to  .
1Select the menu.
≥If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with VIERA Link 
with a HDMI mini cable.
A HDMI mini cable (optional)
B Panasonic TV compatible with VIERA Link
≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there 
are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the 
TV for how to set...

108VQT3K69
3Operate with the remote control for the TV.
1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the center to set it.
2) Activate the operation icons that are displayed on TV screen with the remote control for  the TV.
A Operation icons
B Display operation icons
C Cancel operation icons
D Display/Cancel operation icons
≥ The following operations are available by pressing the color buttons on the remote control.
jGreen:...

109VQT3K69
Connect the unit to a 3D compatible television and play back scenes recorded in 3D to enjoy 
life-like and powerful 3D video.
¬Change the mode to  and touch the play mode select icon. Then set 
[VIDEO/PICTURE] to [AVCHD]. ( l41)
1Select the menu.
2Connect the unit to 3D compatible television and play back scenes 
recorded in 3D. ( l103)
≥Connect the unit to the 3D compatible televi sion using the HDMI mini cable (optional).
≥ For the scenes recorded in 3D,   will appear on the thumbnail...

110VQT3K69
≥You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes 
recorded in 3D on the LCD monitor, they will be played back in 2D.
≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the 
same day, the unit will display the date sepa rately when switching between 2D and 3D 
recordings. (l 92)
≥ When you play back scenes successively, a black screen  will appear for a few seconds 
between scenes recorded in 3D and scenes recorded in...