Panasonic Hdc Sx5 Operating Instructions

							131VQT1J42
Others
STD mode playback menus
(  motion picture playback)
ª[PLAY SETUP]
[PLAY MODE] (l83)
[RESUME PLAY] (l83)
ª[EDIT SCENE]
[DIVIDE] (l87)
[DELETE] (l86)
ª[DISC SETUP]
[FINALIZE] (l94)
[UN-FINALIZE] (l96)
[DISC PROTECT] (l98)
[FORMAT DISC] (l93)
[INFORMATION] (l99)
ª[SETUP]
[DISPLAY] (l131)
[DATE/TIME] (l49)
[DATE FORMAT] (l49)
[POWER SAVE] (l131)
[BEEP SOUND] (l132)
[LCD SET] (l49)
[EVF SET] (l49)
[TV ASPECT] (l107)
ª[LANGUAGE] (l46)ª[H.SHOE MIC]
Set to [LOWCUT] and this reduces low sound 
noise and wind noise hitting the stereo zoom 
microphone (VW-VMH3; optional) mounted on 
the smart accessory shoe.
ª[REC LAMP]
The recording lamp lights during recording and 
flashes when the unit receives a signal from the 
remote control or when the self-timer is counting 
down. When this is set to [OFF], it does not light 
during recording.
ª[DISPLAY]
The screen indications are selected as shown in 
the illustration below.
[OFF]
[ON]
ª[POWER SAVE]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without any 
operation, this unit automatically turns off to save 
battery life. To use this unit turn it on again.
Menus related to [VIDEO] and 
[ADVANCED]
≥[NORMAL]≥[LOWCUT]
≥[OFF]≥[ON]
Menus related to [SETUP]
≥[OFF]≥[ON]
≥[OFF]≥[5 MINUTES]
1+
VQT1J42ENG.book  131 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							132VQT1J42
Others
≥In the following cases, the unit may not turn off 
even when you set this to [5 MINUTES].
jWhen using the AC adaptor
jWhen connecting the unit to a computer or 
printer via the USB cable
jWhen PRE-REC is used
ª[BEEP SOUND]
This allows operations such as starting and 
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an 
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or 
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps/4 times
When an error occurs e.g. recording not starting. 
Check the sentence displayed on the screen. 
(l135)
ª[INITIAL SET] (HD mode only)
When there is a menu that cannot be selected 
due another function or mode being activated, 
set to [YES] for changing the menu settings back 
to the default condition.
(The language setting cannot be changed back 
to the default condition.)
ª[DEMO MODE] (HD mode only)
This item is used to start the unit demonstration. 
(Only when the mode dial is at the   or   
position) If you set this to [ON] without inserting a 
disc or an SD card, this unit is automatically set 
to the demonstration mode for introducing its 
functions. If any button is pressed or operated, 
the demonstration mode is canceled. If no 
operations take place for approx. 10 minutes, the 
demonstration mode automatically starts. To 
terminate the demonstration mode, insert a disc 
or an SD card, or set this to [OFF]. For normal 
use, set this function to [OFF].
ªRecording indications
Motion picture recording
Still picture recording
(when the PHOTO SHOT button is pressed 
halfway) ≥[OFF]≥[ON]
≥[YES]≥[NO]
≥[OFF]≥[ON]
Indications
Remaining battery power
90minRemaining time for battery 
power
R30minRemaining time for motion 
picture recording
0h00m00sElapsed recording time
JAN 1 2008
12:34PMDate indication
Time indication
¥/; (Red)Recording/writing to a disc or 
an SD card
; (Green)Recording pause
Auto mode
Manual mode
MFManual focus
10tZoom magnification indication
Backlight compensation
Image stabilizer
/POWER LCD EXTRA
1/100Shutter speed
OPEN, F2.0F number
0dBGain value
PRE-REC
Intelligent contrast control
JAN 1 2008 12:34PM
AUTO
MNL
1+2+
VQT1J42ENG.book  132 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							133VQT1J42
Others
Soft skin mode
Tele macro
/Fade (White), Fade (Black)
MagicPix function
/Zoom microphone
Wind noise reduction
External microphone 
supporting the smart 
accessory shoe
External microphone 
supporting the smart 
accessory shoe (LOW CUT)
Microphone level
Zebra display
HG mode
HN mode
HE mode
XP mode
SP mode
LP mode
5Sports mode
Portrait mode
Low light mode
Spotlight mode
Surf & snow mode
Auto white balance
Indoor mode (recording under 
incandescent lamp)
Outdoor mode
Manual adjustment mode
Disc type
DVD-RAM
DVD-RW
DVD-RW (VR format)
DVD-RW (Video format)
DVD-RW (unformatted)
DVD-R
/DVD-R DL
(dual layer on single side)
LOWCUT
XP
SP
LP
AWB
ß/ßA/Flash
ßi/ßjFlash level
Red eye reduction
± (White)
¥ (Green)Focus indication
Ø
10/Ø2Self-Timer recording
 MEGA OIS
Number of recording pixels for 
still pictures
1920k1080
 (White)Card can be recorded to
 (Green)Recognizing the card
 (Red)Recording/accessing the card
/Still picture quality
100Remaining number of still 
pictures
MEGA
2.1
VQT1J42ENG.book  133 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							134VQT1J42
Others
ªPlayback indications
Motion picture playback
Still picture playback
ªPC connection indications
ªConfirmatory indications
1Playback
;Pause
5, /
6, Fast forward/rewind playback
7/8Last/first scene paused
9/:Skip playback
D/ESlow motion playback
;1/2;Frame-by-frame playback
0h00m00sPlayback time
Play mode
All scenes on the disc or SD 
card
Scenes recorded on the 
selected date
Number of recording pixels for 
motion pictures
1920k1080
1440k1080
No.10Scene number
Volume adjustment
Repeat playback
Resume playback
100-0001Still picture folder/file number 
display
PictBridgeWhen a printer compatible with 
PictBridge is connected
øüøüøü
1DPOF already set
(to more than 1)
Contents that have been 
protected.
Number of recording pixels for 
still pictures
1920k1080
The picture size is not displayed for still 
pictures recorded with other products that have 
different picture sizes from the sizes shown 
above.
 Accessing the card
(When connected to a computer)
––
(Time 
display)The built-in battery is low. (l49)
°The warning/alarm indication 
appears when LCD monitor is 
rotated towards the lens side. 
Return the direction of the LCD 
monitor to normal position and 
check the warning/alarm 
indication.
No disc is inserted.
Unusable disc
No card is inserted.
2.1
VQT1J42ENG.book  134 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							Others
135VQT1J42
Messages
CANNOT RECORD.Data writing to the disc or SD card has failed.
NO DATA.There are no images recorded on the disc or SD card.
If this message appears although data is recorded on the SD card, 
the condition of the card is probably not stable.
Turn off the power and then turn it on again.
CANNOT BE USED DUE TO 
INCOMPATIBLE DATA.
The recording format is different so it cannot be used.
Insert a new disc or save the data on the SD card to a computer and 
then format the SD card before using it.
CANNOT RECORD 
-INCOMPATIBLE 
CONTROL DATA.
THIS DISC IS 
INCOMPATIBLE.You inserted an incompatible disc (copy-protected discs, etc.).
PLEASE CHECK THE 
DISC.You inserted a disc that cannot be read on this unit, or the disc has 
been protected (write-protect).
THIS IS A 
NON-RECORDABLE DISC.The disc cannot be used for recording on this unit. Insert a new disc.
RECOMMENDED TO USE 
PANASONIC DISCYou inserted a disc that does not meet the DVD standard for quality 
and performance so you may not be able to record normally. 
CANNOT RECORD. (THIS 
DISC IS FINALIZED)A finalized DVD-RW (HD mode)/DVD-RW (Video format/STD 
mode) or DVD-R, DVD-R DL has been inserted.
After finalizing, the discs become play-only and cannot record. If you 
un-finalize a DVD-RW (HD mode)/DVD-RW (Video format/STD 
mode), it can be used for recording. (l96)
CANNOT RECORD. THE 
NUMBER OF SCENES HAS 
EXCEEDED THE MAXIMUM 
LIMIT.The disc or SD card is full or the number of scenes has reached the 
maximum limit so no further data can be recorded. Delete 
unnecessary scenes (l86) or insert a new disc or SD card.
CANNOT RECORD - DATE 
CAPACITY IS FULL.The scenes grouped by date have reached the maximum number of 
dates so recording is not possible.
Delete unnecessary scenes (l86) or insert a new disc or SD card.
NO NEED TO FORMAT 
THIS DISC.DVD-R and DVD-R DL can only be recorded on once so cannot be 
formatted.
THE DISC IS FINALIZED.A finalized disc has been inserted. DVD-R and DVD-R DL cannot be 
un-finalized. If you un-finalize a DVD-RW, it can be used for 
recording again. (l96)
CANNOT FINALIZE.The disc cannot be finalized (un-finalized) on this unit. (The disc 
was recorded on another device etc.)
Or, you are trying to finalize a disc that has no motion pictures 
recorded on it.
VQT1J42ENG.book  135 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							Others
136VQT1J42
CANNOT READ DISC. 
PLEASE CHECK 
CONDITION OF DISC.There are scratches or dirt on the recording/playback side of the 
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l30) If 
the disc is scratched, insert a new one.
CHECK CARD.This card is not compatible or it cannot be recognized by the unit.
THIS CARD CANNOT 
RECORD IN VIDEO MODE.An 8 MB or 16 MB SD card on which motion pictures cannot be 
recorded is inserted.
CARD LOCKED.The write protection switch on the SD card is set to LOCK. (l29)
NOW ACCESSING.
PLEASE DO NOT REMOVE 
CARD.The data is being processed. Close the card slot cover and wait for 
a while.
CARD FULL.The SD card is full so no further data can be recorded. Delete 
unnecessary files (l86, 90) or insert a new SD card.
CANNOT OPERATE THIS 
FUNCTION IN THIS MODE.PRE-REC cannot be set in disc recording mode.
Or, you are trying to copy a disc in STD playback mode.
TOP MENU COULD NOT 
BE CREATED.Creating a top menu has failed.
There may be scratches or dirt on the recording/playback side of the 
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l30)
CANNOT DIVIDE. THE 
NUMBER OF SCENES IS 
FULL.The disc or SD card is full or the number of scenes has reached the 
maximum limit so no further data can be divided. Delete 
unnecessary scenes (l86).
CANNOT OPERATE. 
TEMPERATURE IS HIGH.
The temperature of the unit is high so it cannot be operated. Turn off 
the power, wait until the unit cools and then turn on the power again.
CANNOT OPERATE. 
TEMPERATURE IS HIGH. 
PLEASE TURN OFF AND 
WAIT A WHILE.
THIS BATTERY CANNOT 
BE USED.Use a battery that is compatible with this unit. (l32)
You are attempting to connect an AC adaptor not compatible with 
this unit. Use the supplied AC adaptor. (l35)
If using a Panasonic battery compatible with this unit (l32), eject 
the battery and then insert it again. If the message appears even 
after repeating this several times, this unit needs repair. Detach the 
power and consult the dealer who you purchased this unit from. Do 
not attempt to repair it by yourself.
AGS MODE ON-REC 
PAUSEDThe AGS function is activated. (l52)
PUSH THE RESET 
SWITCH.An irregularity in the unit has been detected. Press the RESET 
button to restart the unit. (l145)
There may be scratches or dirt on the recording/playback side of the 
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l30) If 
the disc is scratched, insert a new one.
CHECK THE DISC AFTER 
PUSHING THE RESET 
SWITCH TO REPAIR THE 
DATA.
VQT1J42ENG.book  136 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							Others
137VQT1J42
It is possible that the system cannot complete writing of a file normally when, for example, power is 
turned off for some reason during recording or editing.
If faulty management information is found when a disc or an SD card is accessed, the following 
message may appear. (Repairing may take time depending on the error.)
¬HD mode
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[FINISHED.]
When the remaining capacity of the battery is low:
[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]
When the remaining capacity of the battery is low:
[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]
¬STD mode
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If the recovery fails, you will no longer be able to playback the data recorded before the power went 
off.
≥When data recorded on another device is recovered, it may not be possible to play back the data on 
this unit or the other device.
≥If the thumbnail information is recovered, displaying the thumbnails may become slower.
CANNOT SET.The [GUIDE LINES], [ZEBRA], [MF ASSIST], [MIC LEVEL] and 
[RED EYE] menu settings cannot be set when the color bar is set.
DISCONNECT USB 
CABLE.The unit cannot correctly establish the connection to the computer 
or printer. Disconnect and then reconnect the USB cable.
(HD mode) DISCONNECT 
USB CABLE.
The unit’s power cannot be turned off when the unit is connected to 
the computer.
(STD mode) CANNOT 
OPERATE WHILE 
CONNECTED TO 
COMPUTER.
About recovery
CONTROL DATA ERROR HAS BEEN 
DETECTED.
THUMBNAIL DATA ERROR IS DETECTED.
DISC ERROR HAS OCCURRED. NOW 
REPAIRING DATA ON THE DISC.
VQT1J42ENG.book  137 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							Others
138VQT1J42
Functions that cannot be used simultaneously
Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. 
The table below shows examples of functions restricted by various conditions.
FunctionsConditions which disable the functions
Backlight compensation≥When the MagicPix function is used
≥When the iris/gain is set
Intelligent contrast control
MagicPix (Set and cancel)≥While recording
≥When PRE-REC is used
Soft skin mode (Set and cancel)
Tele macro (Set and cancel)
Help mode
Self timer
Red eye reduction
Fade≥When PRE-REC is used
Shutter effect≥While motion pictures recording
≥When PRE-REC is used
Flash≥While motion pictures recording
≥When PRE-REC is used
≥When the MagicPix function is used
Zoom≥When the PHOTO SHOT button is pressed halfway in still 
picture recording
Zoom microphone≥An external microphone is used
Wind noise reduction
Scene mode≥When setting the AUTO/MANUAL/FOCUS switch to 
AUTO
≥When the MagicPix function is used
MF assist function≥When digital zoom (10k or higher) is used
Change of white balance≥When digital zoom (10k or higher) is used
≥When the MagicPix function is used
Adjusting the shutter speed, iris/
gain≥When the MagicPix function is used
≥When the scene mode is used
VQT1J42ENG.book  138 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							Others
139VQT1J42
Frequently asked questions
What kind of discs can be used?
DVD-RAM, DVD-RW, DVD-R and DVD-R DL can be used if they are 8 cm (3q) bare 
discs. (l24)
Can discs with a cartridge be used?
They can be used if the cartridge is removed.
Can double sided discs be used?
They can be used. 
However you cannot record or play continuously from one side of the disc to the other. 
You will need to eject the disc and turn it over.
Can I record continuously from one side of the disc to the other on a double sided disc?
You cannot record continuously from one side of the disc to the other. The recording time 
indicated on the disc package is the total time for both sides. You will need to eject the 
disc and turn it over to record on both sides.
Can DVD-R or DVD-R DL be recorded to once only?
Recording can be started and stopped until the disc is full.
(HD mode) The remaining space on the disc will not increase even if recorded scenes 
are deleted.
(STD mode) Once data is recorded it cannot be deleted.
Is playback possible on a DVD player?
HD mode:
To playback a disc recorded on this unit, you will need a playback device that supports 
AV C H D .
Also if a DVD-RW, DVD-R or DVD-R DL recorded on this unit is inserted in another 
device without it being finalized, it may no longer be possible to use the disc. Always 
finalize the disc on this unit before inserting it in another device.
STD mode:
By finalizing a DVD-RW (VR format/Video format) or a DVD-R in this unit, it can be 
played back on a DVD player.
To playback a DVD-RAM, DVD-RW (VR format) or DVD-R DL, you will need a DVD 
recorder or a DVD player that supports DVD-RAM, DVD-RW (VR format) or DVD-R DL. 
Refer to the operating instructions of the DVD recorder or DVD player.
Can I use computer software other than that supplied?
For information about software from other companies, contact the makers of the 
software.
VQT1J42ENG.book  139 ページ  ２００７年７月２０日　金曜日　午前１０時３６分 
						

							Others
140VQT1J42
Troubleshooting
ªUnit operations
ProblemCheck points
This unit cannot be 
turned on.≥Is the battery fully charged?
#Charge the battery using the AC adaptor. (l31)
≥The battery protection circuit may have operated. Attach the battery 
to the AC adaptor for 5 to 10 seconds. If the unit still cannot be 
used, the battery is faulty.
≥Make sure the LCD monitor is opened or the viewfinder extended.
This unit is turned off 
automatically.≥If you do not use the unit for approximately 5 minutes, the power is 
automatically turned off to conserve battery life. To resume 
recording, turn the power back on. The power will not turn off 
automatically when the power save function is set to [OFF]. (l131)
≥Are you connecting to a TV compatible with EZ Sync with a HDMI 
cable?
#If you connect to a TV compatible with EZ Sync with a HDMI 
cable and turn off the power on the TV with the remote control for 
the TV, the power on this unit also turns off. If you are not using 
EZ Sync, set [EZ Sync] to [OFF]. (l103)
This unit does not stay 
on long enough.≥Is the battery low?
#If the remaining battery power indication is flashing or the 
message “CHANGE THE BATTERY.” is displayed, the battery 
has run down. Charge the battery. (l31)
Battery runs down 
quickly.≥Is the battery fully charged?
#Charge it with the AC adaptor. (l31)
≥Are you using the battery in an extremely cold place?
#The battery is affected by ambient temperature. In cold places, 
battery life becomes shorter.
≥Has the battery worn out?
#The battery has a limited life. If the operating time is still too short 
even after the battery is fully charged, the battery has worn out 
and needs to be replaced. 
The minute display of the 
remaining battery power 
indication is not 
displayed correctly.≥The remaining battery capacity indication is an approximation. If 
you think the remaining battery capacity indication is not displayed 
correctly, fully charge the battery, discharge it and then charge it 
again. (Even if this operation is performed, it may not be possible to 
display the remaining battery capacity correctly if the battery was 
used for a long period of time where the temperature was low or 
high or if the battery was repeatedly charged.)
VQT1J42ENG.book  140 ページ  ２００７年７月２０日　金曜日　午前１０時３６分