Panasonic Hdc Sdt750 Operating Instructions

51VQT3B18
Advanced
Recording 
(Advanced)
1
Zoom in/out function
The maximum optical zoom ratio is 12k.
The default setting of the [ZOOM MODE] is [i.Zoom 18 k]. It can be extended to a maximum 
of 18k  during Motion Picture Recording Mode. ( l69)
¬ Change the mode to   or  .
Zoom operation can be done using the multi 
manual ring.
Zoom by rotating the ring.
≥The zoom speed varies depending on the 
speed to rotate the ring. If the number of the recording pixels is set to 
anything other than the maximum...

52VQT3B18
Advanced
Recording 
(Advanced)
2
Image Stabilizer 
Function
Use the image stabilizer to reduce the effects of shake during recording.
This unit is equipped with HYBRID O.I.S.
HYBRID O.I.S. is a hybrid of optical and electrical image stabilizer.
¬Change the mode to   or  .
∫ Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
When set to [ON], you can further improve image stabilization for recording while walking, or 
holding the unit and recording a distant subject with zoom.
≥This...

53VQT3B18
In Motion Picture Recording Mode, you can further improve optical image stabilization by 
touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects 
of the shake that tends
 to occur when using zoom.
AO.I.S. LOCK icon
≥ Press the Optical Image Stabilizer button to switch the image stabilizer to ON.
≥  is displayed while you are touching the icon.
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
≥ Operation icon will...

54VQT3B18
Advanced
Recording 
(Advanced)
3
AF/AE tracking
It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automatically even if it moves. 
(Dynamic tracking)
¬Change the mode to   or  .
1Touch .
≥  will be displayed on the screen.
≥ When [FACE RECOG.] ( l71) is [ON] and 
a registered face is detected, the target is 
automatically locked.
2Touch the object and lock the 
target.
A Target frame
≥ When you touch...

55VQT3B18
Advanced
Recording 
(Advanced)
4
1080/60p recording
This is a 1080/60p (1920k1080/60 progressive) recording mode that can record in maximum 
quality*.
* This means the highest quality for this unit.
¬ Change the mode to .
≥Please refer to page 156 for details about approximate recordable time.
Latest information, such as which Panasonic TVs can play back the scenes recorded in 
1080/60p recorded with this unit, can be found on the following support site. 
(As of Aug. 2010)...

56VQT3B18
Advanced
Recording 
(Advanced)
5
Recording 3D video
With the supplied 3D Conversion Lens attached, you can record life-like and powerful 3D 
video. To view 3D video, a television that supports 3D is required.
≥ In the unit, the recordable 3D videos are side-by-side format (2-screen structure).
≥ Since the 3D video is recorded in side-by-side format, the recorded 3D video is not of high 
definition picture quality.
∫ Attaching the 3D Conversion Lens
1Rotate the lens rear cap in the 
direction...

57VQT3B18
3Tighten the attachment screw of the 3D 
Conversion Lens by rotating to LOCK. 
≥Be careful not to overtighten. If the 3D Conversion Lens is 
overtightened, you may not be able to remove it from the 
unit.
≥ Attach the 3D Conversion Lens securely so it will not tilt or 
move.
∫ Recording 3D video
When using for the first time, be sure to adju st the 3D Conversion Lens attachment position.
≥ Turn off the unit.
≥ Change the mode to 
.
1Attach the 3D Conversion Lens to the unit. ( l56)
2Turn on the...

58VQT3B18
5Open the adjustment dial cover.
≥When turning the adjustment dials, hold the 3D Conversion 
Lens in the palm of your hand from the bottom and operate 
with the fingers of your other hand without applying too much 
force from above. When checking the adjustment, check with 
your fingers off the adjustment dials. 
6(After checking the operation description, touch [NEXT].)
To adjust the horizontal position, rotate the horizontal image 
position adjustment dial   so that the black vertical line is...

59VQT3B18
9(After checking the operation description, touch [NEXT].)
Adjust the vertical alignment adjustment dial   to align the vertical 
position of the subject shown duplicated.
≥Aim the unit at a subject from a distance of approximately 1.2 m (3.9  feet) to 2 m (6.6  feet), 
and keep the image shown level by using the guidelines A. ≥Difference in horizontal direction is characteristic of 3D video.
≥ It is recommended to stabilize the unit using the lens front cap as a platform when 
performing the...

60VQT3B18
≥Use of a tripod is recommended for recording with a stable picture.
≥ The reception range for the remote control might become narrow at the upper side of the 
unit, so operate from the lower side. ( l50)
≥ You will hear a sound when the unit is moved rapidly with the 3D Conversion Lens 
attached, but this is not a malfunction. 
≥ When the adjustment dial is rotated too much, you will hear a “clapping” sound and the 
adjustment screen will stop moving. In such a case, rotate the adjustment dial...