Panasonic Hdc Sdt750 Operating Instructions

31VQT3B18
Basic
Recording/
Playback
2
Recording motion 
pictures
1Change the mode to  .
2Open the LCD monitor or 
extend the viewfinder.
3Press the recording start/stop 
button to start recording.
BWhen you begin recording,  ; 
changes to  ¥.
4Press the recording start/stop 
button again to pause 
recording.
≥ Still pictures can be recorded while recording the motion picture. ( l34)
≥ The images recorded between pressing the recording start/stop button to start recording 
and pressing it again to pause...

32VQT3B18
∫Screen indications in the Motion Picture Recording Mode
About the compatibility of the recorded 
motion picturesPlease refer to page 55 about 
1080/60p
≥They are not compatible with devices other  than those that support AVCHD. Images 
cannot be played with equipment that does not support AVCHD (ordinary DVD 
recorders). Confirm that your equipment supports AVCHD by referring to the operating 
instructions.
≥ There are some cases where the recorded motion pictures cannot be played back, 
even...

33VQT3B18
Basic
Recording/
Playback
3
Recording still pictures
1Change the mode to  .
2Open the LCD monitor or 
extend the viewfinder.
3Press the   button halfway. 
(For Auto focus only)
4Press the   button fully.
Focus indication:
≥ If you set the Optical image stabilizer function ( l52) to   (MODE1), then the Image 
Stabilizer function will be more effective. (  (MEGA Optical Image Stabilizer) will be 
displayed when the   button is pressed halfway.)
≥ The AF assist lamp lights in dark places.
≥ Focus...

34VQT3B18
∫About the screen indications in 
Still Picture Recording
:Still picture operation indicator 
(l139)ß: Flash ( l65)
ß j : Flash level ( l65)
: Red-eye reduction ( l65)
:
MEGA optical image stabilizer 
(l 33): Optical image stabilizer ( l52)
: Quality of still pictures ( l83)
: Size of still pictures ( l82)
R3000: Remaining number of still pictures
(Flashes in red when [0] appears.)
: AF assist lamp ( l85)
∫ About the focus indication
≥The focus indication indicates the status of 
the Auto...

35VQT3B18
Basic
Recording/
Playback
4
Intelligent Auto Mode
The following modes (appropriate for the condition) are set just by pointing the unit to what 
you want to record.
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
≥ Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight and Low light mode, a subject that is bigger and close to center of 
the screen will be surrounded by an orange frame. ( l74)
ModeSceneEffect...

36VQT3B18
≥Using a tripod is recommended in Night Portrait and Night Scenery Mode.
≥ Faces cannot be detected depending on the recording conditions, such as when faces are 
of certain sizes or at certain tilts or when digital zoom is used.
≥ The microphone setup is set to surround in the Intelligent Auto Mode. ( l77)
∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the 
Auto White Balance and Auto Focus operate 
and automatically adjust the color balance 
and focusing.
Depending on the...

37VQT3B18
Basic
Recording/
Playback
5
Motion picture/Still 
picture playback
1Change the mode to  .
2Touch the play mode select icon B.
3Select the [VIDEO/PICTURE] you wish 
to play back.
≥ Touch [ENTER].
4Touch the scene or the still picture to be 
played back.
C is displayed when [1080/60p] is touched or 
 is displayed when [AVCHD] is touched in step 3.
≥ Next (previous) page can be displayed by touching 
/.
≥Align with the status indicator  A.


HDC-SDT750&TMT750-P-VQT3B18_mst.book  37 ページ...

38VQT3B18
5Select the playback operation by touching the operation icon.
AOperation icon
≥ Touch 
/ to display/not-display the operation 
icon.
Motion picture playbackStill picture playback
1/ ;: Playback/Pause
6 : Rewind playback
5 : Fast forward playback
∫ : Stops the playback and shows 
the thumbnails.
1: Displays the direct playback  bar. (l91) 1/
;: Slide show (playback of the still 
pictures in numerical order) 
start/pause.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫...

39VQT3B18
∫Change the thumbnail display
While the thumbnail is displayed, the 
thumbnail display changes in the following 
order if the zoom lever or adjust zoom 
buttons are operated to   side or   
side.
20 scenes  () 9 scenes  () 1 scene
()  Highlight&Time frame index* ( l92)
* Highlight&Time frame index can only set  in Motion Picture Playback Mode.
≥ 9 scenes display returns if the unit is 
turned off or the mode is changed.
≥ When the thumbnail display is changed to 
1 scene during motion picture...

40VQT3B18
Basic
Setup
1
Using the menu screen
1Press the MENU button.
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] or press the 
MENU button to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide display is...