Panasonic Hdc Sd800 Owners Manual

41VQT3K35
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
Please refer to page 27.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l27)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] 
and proceed to Step 3.
2(Only when setting your home...

42VQT3K35
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight 
saving time.   appears and the 
summer time setting is turned on. The 
travel destination time and time difference 
from the home region time are set forward 
by one hour. Touch [SUMMER TIME SET] 
again to return to the normal time setting.
≥ Close the setting by touching [EXIT].   
appears and the time of the travel destination...

43VQT3K35
The unit is put into recording pause approx. 1 second when the unit is turned on with the 
mode set to   or  .
≥Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick power on mode, the zoom magnification becomes 1 k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick start standby mode about 80% of the power used in Recording pause 
mode is being consumed, so the recording time will be reduced.
≥...

44VQT3K35
The recording lamp lights up during recording and flashes when the unit receives a signal 
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it 
does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed 
with this sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l134)
This makes it easier to view the LCD monitor in...

45VQT3K35
Please refer to page 100.
Please refer to page 100.
Please refer to page 100.
Please refer to page 101.
Please refer to page 99.
Please refer to page 103.
Set to [YES] for changing the menu settings back to the default condition.
≥Settings for [CLOCK SET] and [LANGUAGE] will not be changed.
Set the file number of the iFrame and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001.( l128)
≥ To reset the folder number, format the SD card, and then...

46VQT3K35
The used space and remaining recordable time of the SD card can be checked.
≥When the mode switch is set to  , remaining recordable time for the selected recording 
mode is displayed.
≥ Touch [EXIT] to close the indication.
≥The SD card requires some space to store information and manage system files, so the 
actual usable space is slightly less than the indicated value. The usable space is generally 
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are...

47VQT3K35
Select the menu.
1 Power on/off button [ ]
Unit can be turned on/off when the LCD 
monitor is opened.
≥
Unit cannot be turned on by the power on/
off button when 36 hours have passed after 
the unit is turned off. Press the power 
button on the unit and turn the unit back on.
≥Unit cannot be turned off when it is 
connected to the PC or the DVD burner.
2 Photoshot button [ ]
*
3 On-screen display button  [EXT DISPLAY] ( l99)
4 Playback operation buttons (l36, 82)These buttons function in the...

48VQT3K35
∫Remote control usable range
A Remote control sensor
Distance: Within approx. 5 m (16 feet)
Angle: Approx. 10 o up and 15 o down, left, 
and right
≥ The remote control is intended for indoor 
operation. Outdoors or under strong light, 
the unit may not operate properly even 
within the usable ranges.
Operation of direction 
buttons/OK button
1Press a direction button.
≥Selected item will become yellow.
2Select the item with the 
direction button.
3Confirm the selection by 
pressing the OK...

49VQT3K35
≥Maximum zoom magnification for recording motion pictures can be set with [ZOOM 
MODE]. ( l61)
≥ You can also zoom by simply touching the LCD monitor. (Touch Zoom: l 52)
About the zoom speed
The zoom speed will be faster in the order of zoom lever, zoom button icon/zoom button on 
the remote control, touch zoom.
≥ The zoom speed varies depending on the range over which the zoom lever is moved.
≥ The zoom operation using the zoom button icon, zoom button on the remote control or 
touch zoom will...

50VQT3K35
Use the image stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of optical and electrical image stabilizer.
≥Please refer to page 54 for details about the Optical Image Stabilizer Lock.
∫ Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
When set to [ON], you can further improve image stabilization for recording while walking, or 
holding the unit and recording a...