Panasonic Hdc Sd800 Owners Manual

11VQT3K35
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Dec. 2010. These may be subject to change.
Accessories
Battery pack
VW-VBN130
AC adaptor
VSK0732
AC cable
K2CA2CA00025
Remote control
(Built-in battery)
N2QAEC000024
AV multi cable
K1HY12YY0008
USB cable
K1HA05AD0007
Stylus pen
VGQ0C14
≥This is used for operations that are hard to 
operate with your fingers or performing 
detailed operations with the...

12VQT3K35
∫Inserting the battery
Install the battery by inserting it in the 
direction shown in the figure.
A Insert the battery until it clicks and locks.
∫Charging the battery
A DC input terminal
1 Connect the AC adaptor to the DC input 
terminal.
2 Connect the AC cable to the AC 
adaptor, then the AC outlet.
≥ The status indicator will flash red at an 
interval of 2 seconds, indicating that 
charging has begun.
It will turn off when the charging is 
completed.
 
∫ Inserting/removing an SD card
1) Open...

13VQT3K35
∫Turning the unit on/off
Turning the unit on and off with the 
power button
Press the power button to turn on the unit.
A The status indicator lights on.
≥ To turn off the unit, hold down the power 
button until the status indicator goes off.
Turning the unit on and off with the LCD 
monitor
Opening the LCD monitor turns on the unit. 
Closing the LCD monitor turns off the unit.
To turn on the unit
A The status indicator lights on.
To turn off the unit
B The status indicator goes off.
∫Selecting...

14VQT3K35
Touch Menu
Touch   to display the Touch Menu.
Touch   (left side)/  (right side) of   on 
the Touch Menu to switch the operation 
icons.
ATouch Menu
∫Language selection
1) Touch [MENU], then touch [SETUP]  # 
[LANGUAGE].
2) Touch desired language.
∫ Recording motion pictures
1) Change the mode to  .
2) Open the LCD monitor.
3) Press the recording start/stop button to 
start recording.
A When you begin recording,  ; changes 
to  ¥.
∫ Recording still pictures
1) Change the mode to  .
2) Open the...

15VQT3K35
∫Motion picture/Still picture 
playback
1) Change the mode to  .
2) Touch the play mode select icon  A.
3) Touch the [VIDEO/PICTURE] you wish  to play back.
≥ Touch [ENTER].
4) Touch the scene or the still picture to be  played back.
B  is displayed when [1080/60p] is 
touched,   is displayed when 
[AVCHD] is touched 
or  is 
displayed when [iFrame] is touched in 
step 3.
≥ To display the next (previous) page:
jSlide the thumbnail display upward 
(downward) while touching it.
j Switch the Touch...

16VQT3K35
1 Speaker
2 Power button [ ] (l24)
3 Inlet (cooling fan) ( l28)
4 Intelligent auto/Manual button 
[iA/MANUAL] ( l34, 75)
5 Optical image stabilizer button  [ O.I.S.] ( l50)
6 1080/60p button [1080/60p] ( l51)
7 Battery release lever [BATT] (l 19)
8 Battery holder ( l19)
9 HDMI mini connector [HDMI]  (l 97, 101)
10 USB terminal [ ] ( l106, 112, 126)
11 AV multi connector ( l97, 115)
≥ Use the AV multi cable (only the supplied 
cable).
12 Card slot ( l23)
13 Access lamp [ACCESS] ( l23)
14 Lens...

17VQT3K35
21 LCD monitor (Touch screen) (l25)
≥ It can open up to 90 o.
≥ It can rotate up to 180 o A towards the lens 
or 90 o B  towards the opposite direction.
22 Tripod receptacle
≥If you attach a tripod which has 5.5 mm 
(0.22 q) screw or larger, it may damage 
this unit.
21
Due to limitations in LCD production 
technology, there may be some tiny bright 
or dark spots on the LCD monitor screen. 
However, this is not a malfunction and 
does not affect the recorded picture.
22...

18VQT3K35
23 Status indicator (l24)
24 Photoshot button [ ] ( l32)
25 Zoom lever [W/T] (In Motion Picture 
Recording Mode or Still Picture 
Recording Mode) (l 49)
Thumbnail display switch [ / ]/
Volume lever [ sVOL r] (In Playback 
Mode) ( l37)
26 Internal microphones
27 Mode switch ( l25)
28 Recording start/stop button (l 30)
29 Shoulder strap fixture
30 Grip belt
Adjust the length of the grip belt so that it fits 
your hand.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
31 DC input terminal...

19VQT3K35
∫About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBN130/VW-VBN260.
≥The unit has a function for distinguishing batteries which can be used safely. The 
dedicated battery (VW-VBN130/VW-VBN260) supports this function. The only 
batteries suitable for use with this unit are genuine Panasonic products and 
batteries manufactured by other companies and certified by Panasonic. (Batteries 
which do not support this function cannot be used). Panasonic...

20VQT3K35
Charging the battery
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. 
Also, do not use the AC cable from other equipment with this unit.
≥ The battery can also be charged using a battery charger (VW-BC20PP; optional).
≥ The battery will not be charged if the unit is turned on.
≥ It is recommended to charge the battery in a temperature between 10 °C to 30 °C 
(50 °F to...