Panasonic Hdc Sd800 Owners Manual

21VQT3K35
Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. 
Charging time and recordable time vary depending on the usage conditions such as 
high/low temperature.
≥ Recordable time of 3D recording mode is the same.
(During 3D recording mode, 1080/60p and iFrame recording mode cannot be used.)
≥The actual recordable time refers to the...

22VQT3K35
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for 
motion picture recording.
* SD Speed Class Rating is the speed standard regarding continuous writing. 
Check via the label on the card, etc.
≥Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC 
Memory Cards that can be used for motion picture recording on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in...

23VQT3K35
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card/terminal 
cover and insert (remove) the 
SD card into (from) the card 
slot.
≥Face the label side  B in the direction 
shown in the illustration and press it 
straight in as far as it will go.
≥ Press the center of the SD card and then 
pull it straight out.
3Securely close the SD card/
terminal cover.
≥Securely close it until it clicks.
≥Do not touch the terminals on the...

24VQT3K35
You can turn the unit on and off using the power button or by opening and closing the LCD 
monitor.
Turning the unit on and off with the power button
Press the power button to turn on the unit.
AThe status indicator lights on.
Turning the unit on and off with the LCD monitor
Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used 
to turn the unit on/off.
∫To turn on the unit
A...

25VQT3K35
Change the mode to recording or playback.
Operate the mode switch to change the mode to  ,   or  .
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with 
your fingers.
∫Touch
Touch and release the touch screen to select icon or 
picture.
≥Touch the center of the icon.
≥ Touching the touch screen will not operate while 
you are touching another part of the touch...

26VQT3K35
∫About the operation icons
///:
These icons are used to switch the menu and thumbnail 
display page, for item selection and setting etc.
:
Touch to return to the previous screen such as when 
setting menus.
About the Touch Menu
Touch   (left side)/  (right side) of   on the Touch Menu to switch the operation icons.
Touch   (left side)/  (right side) of   on the Touch Menu.≥ It is also possible to switch the operation icons by sliding the Touch Menu right or left while 
touching it.
B Touch...

27VQT3K35
∫To display the Touch Menu
≥Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
≥ Perform the touch screen calibration when the touch is not recognized or wrong location is 
recognized. ( l46)
When the unit is turned on for the first time, a message asking you to set the date and time 
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1Select the menu. ( l39)
2Touch the date or time to be set, then set the desired value using  /
.
A...

28VQT3K35
∫Basic camera positioning
1 Hold the unit with both hands.
2 Put your hand through the grip belt.
3 It is convenient to use the recording button icon A  when holding the unit at waist level.
≥ When recording, make sure your footing is stable and there is no danger of colliding with 
another person or object.
≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is 
backlit, it will become dark in the recording.
≥ Keep your arms near your body and separate your...

29VQT3K35
∫To recording yourself
Rotate the LCD monitor towards the lens side.
≥ The image is horizontally flipped as if you see a mirror image. 
(However the image recorded is the same as a normal 
recording.)
≥Only some indications will appear on the screen. When   appears, return the direction 
of the LCD monitor to normal position and check the warning/alarm indication. ( l134)
∫ Attaching/Removing the lens hood
This will reduce the extra light entering the lens  in bright sunlight or backlight etc.,...

30VQT3K35
1Change the mode to  .
2Open the LCD monitor.
3Press the recording start/stop 
button to start recording.
AWhen you begin recording,  ; 
changes to  ¥.
4Press the recording start/stop 
button again to pause 
recording.
B You can also start or pause recording by touching the recording start/stop button icon. 
This icon functions in the same manner as the recording start/stop button.
∫Screen indications in the Motion Picture Recording Mode
Basic
Recording motion pictures
TW


0h00m00s 0h00m00s...