Panasonic Hdc Sd80 Owners Manual

							71VQT3J15
5(When [SELECT] is selected in step 4)
Touch the range of pictures that will be stored.≥Previous (Next) page is displayed by touching  /
.
* Only select the picture for start point if only 1 picture is  to be stored.
≥ A confirmation message is displayed when [Enter] is 
touched after selecting the start point and finish point. 
Touch [YES] to store the pictures.
≥If you turn off the unit or change the mode, this function is canceled.
≥ The maximum number of times you can record on a media is 15.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ Color balance and brightness on the screen may change with some light sources such as 
fluorescent lamps.
≥ Image quality is different from ordinary still picture recording.
The Photo light is turned on to make it easier to focus when you are recording in dark places 
where it is hard to focus.
≥ Switch to Manual Mode. ( l72)
≥ Set the Photo light to   ([AUTO]) or   ([OFF]). ( l57)
≥When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be 
changed.
≥ It may not turn on when the LED light is very hot.
You can add a shutter sound when recording still pictures.
≥ No shutter sound is emitted in Motion Picture Recording Mode.
[AF ASSIST LAMP]
: [PICTURE]  # [AF ASSIST LAMP]  # [AUTO]
[SHTR SOUND]
: [PICTURE] # [SHTR SOUND] #  desired setting
[OFF]:Cancel the setting.
:Volume low
:Vo l u m e hi g h
AStar t  p oi n t*
BFinish point
MENU
MENU
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  71 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							72VQT3J15
≥The manual focus, white balance, shutter speed, brightness (Iris and Gain) settings 
are retained when you change between Motion Picture Recording Mode and Still 
Picture Recording Mode.
Press the iA/MANUAL button to switch to Manual Mode.
≥  appears on the screen.
Advanced (Recording)
Manual recording
MNL
/MANUALFOCUSWBSHTRIRIS
MNL
AManual icons
Focus ( l75)
White balance ( l73)
Manual shutter speed ( l74)
Iris adjustment ( l74)
FOCUS
WB
SHTR
IRIS
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  72 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							73VQT3J15
White balance
Automatic white balance function may not reproduce natural colors depending on the scenes 
or lighting conditions. If so, you can adjust the white balance manually.
≥Press the iA/MANUAL button to switch to Manual Mode. ( l72)
1Touch [WB].
2Touch  /  to select White balance mode.≥Select the optimal mode by confirming the color on the 
screen.
≥ Touch [WB] to select the mode. 
≥ To return to auto setting, set to   or press the iA/MANUAL button again.
∫ To set the white balance manually
1 Select  , fill the screen with a white subject.
2 Touch and set the blinking  .
≥When the screen turns black instantly and the   display 
stops flashing and then lights constantly, the setting is 
complete.
≥ If the   display continues flashing, the white balance 
cannot be set. In this case, use other White balance modes.
≥When the   display flashes, the manual white balance previously adjusted is stored. 
Whenever recording conditions change, re-set the white balance.
≥ When setting both the white balance and the iris/gain, set the white balance first.
≥  is not displayed on the screen when   is being set.
IconMode/Recording conditions
Auto white balance adjustment
Sunny mode:  
Outdoors under a clear sky
Cloudy mode:  
Outdoors under cloudy sky
Indoor mode 1:  
Incandescent light, video lights like in the studio, etc.
Indoor mode 2:  
Color fluorescent lamps, sodi um lamps in gymnasiums etc.
Manual adjustment mode:
≥Mercury-vapor lamps, sodium lamps, some fluorescent lights
≥ Lights used for wedding receptions at hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
FOCUSWBSHTRIRISAW B
MNL
AW B
AW B
FOCUSWBSHTRIRIS
MNL
AW BAW B
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  73 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							74VQT3J15
Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥Press the iA/MANUAL button to switch to Manual Mode. ( l72)
1Touch [SHTR] or [IRIS].
2Touch  /  to adjust settings.
≥Touch [SHTR]/[IRIS] to end the adjustment. 
Shutter speed:
1/60 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 
and 1/8000.
≥ The shutter speed closer to 1/8000 is faster.
≥ The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.
Iris/Gain value:
CLOSE 
!# (F16 to F2.0) !# OPEN !# (0dB to 18dB)
≥ Value closer to CLOSE darkens the image.
≥ Value closer to 18dB brightens the image.
≥ When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
≥ To return to auto setting, press the iA/MANUAL button again.
≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then 
set the iris/gain value.
Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using a 
tripod is recommended. Also, white balance cannot be set. The shutter speed will be set to 
1/30 when the unit is turned on again or when the Quick start is performed.
≥ You may see a band of light around an object that is shining very bright, or highly reflective.
≥ During normal playback, image movement may not look smooth.
≥ If you record an extremely bright object or record under indoor lighting, color and screen 
brightness may change or a horizontal line may appear on the screen. In this case, record 
in the Intelligent Auto Mode or set the shutter speed to 1/60 in areas where the power 
supply frequency is 60 Hz, or 1/100 in areas of 50 Hz.
Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the screen increases.
≥ Depending on the zoom magnification, there are iris values that are not displayed.
SHTR
IRIS
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  74 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							75VQT3J15
Manual focus adjustment
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥Press the iA/MANUAL button to switch to Manual Mode. ( l72)
1(When MF assist function is used)
Select the menu.
≥Touch   to display the Manual icon.
2Touch [FOCUS].
3Touch [MF] to change to Manual Focus.≥MF appears on the screen.
4Adjust the focus by touching  / .
The in-focus area is displayed in blue. The normal 
screen returns approximately 2 seconds after you finish 
bringing the subject into focus.
≥Touch [FOCUS] to end the adjustment. 
≥ When [MF ASSIST] is [OFF], the blue area is not displayed.
≥ To restore Auto Focus, touch [AF] in step 3 or press the iA/MANUAL button again.
≥The blue display does not appear on the images actually recorded. : [RECORD SETUP] 
# [MF ASSIST] # [ON]
:To focus on a close subject
:To focus on a faraway subject
MENU
MNL
MFMFMF
FOCUSWBSHTRIRIS
APart displayed in blue
MFMF
MF
MF
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  75 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							76VQT3J15
Motion picture playback using operation icon
For details on the basic playback operations, refer to page 38.
Advanced (Playback)
Playback Operations
Playback operationPlayback displayOperating steps
Fast forward/
rewind playback During PlaybackTo u c h  
5 during playback to fast 
forward.
(Touch  6 to rewind.)
≥ The fast forward/rewind speed 
increases if you touch  5/6  again. 
(The display on the screen changes 
from  5 to  .)
≥ Normal playback is restored when you 
touch .
Skip playback
(to the start of a 
scene) During playback, touch the LCD 
monitor and slide quickly from right to 
left (from left to right) before releasing 
your finger.
Slow-motion  playback
During Pause With the playback paused, continue 
touching .
(  is for slow rewind playback)
Playback is slow while touching.
≥
Normal playback is restored when you 
touch .
≥ When slow-motion pictures are played 
back in reverse, they will be shown 
continuously at approximately 2/3
rd the 
speed of normal playback (intervals of 
0.5 seconds).
≥ Slow-motion playback for iFrame 
scenes will be in 1 second intervals.
Frame-by-frame  playback
The motion 
picture is 
advanced one 
frame at a time. With the playback paused, touch  .
(Touch   to advance the frames one 
at a time in the reverse direction.)
≥
Normal playback is restored when you 
touch .
≥ When the frames are advanced one at a 
time in the reverse direction, they will be 
shown in intervals of 0.5 seconds.
≥ Frame-by-frame playback for iFrame 
scenes will be in 1 second intervals.
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  76 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							77VQT3J15
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
Picture size of the still picture to be recorded is   (1920k1080).
1Pause at the scene you want to save as a still picture during 
playback.
≥ It is convenient to use slow-motion playback and frame-by-frame playback.
2Press the   button fully.≥Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Playback operationPlayback displayOperating steps
Direct playback During Playback Touch the Direct playback bar or slide 
it while touching.
≥
The playback pauses temporarily and 
skips to the position touched or slid to 
while touching.
≥ Playback will start by releasing your 
touching or sliding finger.
2.1M
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  77 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							78VQT3J15
Highlight & Time frame index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be 
played back from any midway point of the scene you wish to see.
≥Operate the zoom lever to   side and change over the 
thumbnail display to Highlight & Time frame index. ( l39)
1Touch .≥To display the next (previous) page:
jSlide the thumbnail display upward (downward) while 
touching it.
j Switch the Touch Menu, and then touch   (up) /   (down) on the thumbnail 
scroll lever.
2Touch the desired search condition.[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]*
* It is not displayed on iFrame scenes.
≥When select [FACE], it will select the port ion for which face recognition was performed 
from the scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
≥ A portion judged to be clearly recorded will be detected and displayed in thumbnail if you 
select [HIGHLIGHT].
3(When [MINUTES] is selected)
Touch  /  to set the time.≥It can be set up to a maximum of 60 minutes.
≥ Touch [ENTER].
4Touch the thumbnail to be played back.≥Next (previous) thumbnail can be displayed by touching  / .
Repeat playback
Playback of the first scene starts after playback of the last scene finishes.
The   indication appears on the full screen views.
≥All the scenes are played back repeatedly. (Wh en playing back motion pictures by date, all 
the scenes on the selected date are played back repeatedly.) : [VIDEO SETUP] 
# [REPEAT PLAY]  # [ON]
MENU
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  78 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							79VQT3J15
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped.
If playback of a motion picture is stopped,   appears on the thumbnail view of the stopped scene.
≥The memorized resume position is cleared if you turn off the unit or change the mode.
(The setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback 
(Playback zoom)
You can zoom in by touching a still picture during playback.
1Touch and hold the part you wish to zoom in on during still picture 
playback.
≥It will display enlarged in order of normal display ( k1)  # k 2 #  k 4. Keep on touching the 
screen to enlarge  k1 #  k 2. Touch the screen to enlarge  k2 #  k4.
≥ The still picture is zoomed in on, centering on the part you touched.
2Move to the zoomed in position by touching 
/ / /  or slide while touching the 
screen.
≥ The location of the zoom displays for about 1 second when 
zooming in (zooming out) or moving the displayed location.
≥
The more picture is enlarged, the more its quality deteriorates.
Zooming out from the zoomed still pictureTouch   to zoom out. ( k4 #  k2 #  k1)
≥ Touch   to return to normal playback ( k1).
≥ You can also perform zoom operations using the zoom lever. : [VIDEO SETUP] 
# [RESUME PLAY]  # [ON]
MENU
ADisplayed location of 
the zoom
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  79 ページ  ２０１１年１月５日　水曜日　午後２時５１分 
						

							80VQT3J15
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1Touch the date select icon. (l28)
2Touch the playback date.
The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3Touch the scene or the still picture to be played back.
≥Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode 
is changed.
≥
Even if AVCHD scenes are recorded on the same day, they are grouped separately when the 
number of scenes exceeds 99. -1, -2... are added after the date displayed on the date list. ≥ Even if iFrame scenes are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of scenes exceeds 99
j When [NUMBER RESET] is performed
≥ Even if still pictures are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of still pictures exceeds 999
j When pictures are recorded in Hi-Speed Burst Shooting mode (  is indicated after the 
date in the list by date).
j When [NUMBER RESET] is performed
≥  is displayed after the date in the list by date for the still pictures created from the motion 
picture. ( l77)
Advanced (Playback)
Various playback functions
ALL
A Date select icon
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book  80 ページ  ２０１１年１月５日　水曜日　午後２時５１分