Panasonic Hdc Sd80 Owners Manual

101VQT3J15
1Connect the AC adaptor (supplied with DVD burner) to the DVD 
burner.
≥You cannot supply power to the DVD burner from this unit.
2Connect this unit to the AC adaptor and change the mode to  .
3Connect this unit to the DVD burner with the USB Connection Cable 
(supplied with DVD burner).
A USB Connection Cable (supplied with DVD burner)
B DVD burner (optional)
≥ Insert the plugs as far as they will go.
4Insert the disc in the DVD burner.≥Insert the DVD disc with the recording side down when...

102VQT3J15
Copying to discs
≥You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a 
DVD-RAM.)
≥ You cannot copy motion pictures together with st ill pictures or motion pictures in a different 
picture quality (AVCHD picture quality and conventional normal picture quality) to the same 
disc.
≥ iFrame scenes cannot be copied to disc. Copy to PC to make a backup. ( l110)
≥
When copying a scene in the built-in memory to a disc that includes a scene that was 
relay-recorded,...

103VQT3J15
Important Notice≥When connecting an optional DVD burner and this unit for copying a disc, do not 
insert a disc with recorded motion pictures in high definition picture quality into 
devices that do not support the AVCHD format. In some cases the disc may get 
stuck in the device. The disc will not play back on devices that do not support the 
AVCHD format.
≥ When inserting a disc containing recorded motion/still pictures into other 
devices, a message prompting you to format the disc may be...

104VQT3J15
≥The disc that was copied to can be played  back by connecting this unit and a DVD 
burner.
≥ Do not turn off this unit or the DVD burner  or disconnect the USB Connection Cable while 
copying. Also, do not shake this unit or the DVD burner.
≥ It is impossible to stop copying halfway.
≥ The order in which the scenes were copied cannot be changed.
≥ Data that has been recorded on another device may not be copied.
≥ When 2 or more discs are necessary for copying, the last scene copied to a disc...

105VQT3J15
Managing the copied disc
≥Connect this unit to the DVD burner and then touch [PLAY DISC]. ( l101)
∫ Formatting discs
This is for initializing DVD-RAM, DVD-RW and +RW discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will 
be erased. Back up important data on a PC etc.
≥When formatting is complete, touch [EXIT] to exit the message screen.
≥Connect this unit and the DVD burner to format discs. 
You may no longer be able to use the discs if you format them...

106VQT3J15
∫Check before dubbing
Check the equipment used for dubbing.
* Some equipment may not be compatible with high-definition (AVCHD) picture quality. In 
such a case, connect with the AV multi cable and dub with standard picture quality. ( l109)
≥ For the positions of the SD card slot, USB terminal, or terminal for connecting the AV multi 
cable, refer to the operating instructions of the equipment used.
≥ The iFrame scenes cannot be dubbed to SD cards or by connecting with the USB cable. To 
dub...

107VQT3J15
∫To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥ /
To copy scenes or still pictures from the built-
in memory or HDD to an SD card, see page 
98.
∫ To dub using equipment with a 
USB terminal
You can dub by connecting a USB cable.
≥Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn on the unit (This function is available in all modes).
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1Connect the unit...

108VQT3J15
4Dubbing through operations on the Blu-ray disc recorder or high-
definition (AVCHD) compatible DVD recorder.
≥ /
Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)
≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using 
a USB cable while the unit is turned on, power is also supplied from the connected 
equipment to this...

109VQT3J15
∫Dubbing using equipment without an SD card slot or a USB terminal, 
or using a video device
You can dub by connecting an AV multi cable.
≥Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
1Connect this unit to a video device and then change the mode to 
.
2Start playback on this unit.
3Start recording on the connected device.
≥To stop recording (dubbing), stop playback on this unit after stopping recording on the 
recorder....

110VQT3J15
HD Writer AE 3.0You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray 
discs, DVD discs or SD cards using HD Writer AE 3.0, the software installed in the supplied 
CD-ROM.
Refer to the operating instructions of HD Writer AE 3.0 (PDF file) for details on how to use it.
∫Smart wizard
The Smart wizard screen is automatically displayed when you connect this unit to a PC with 
HD Writer AE 3.0 installed. ( l118)
Copy to PC:
You can copy motion/still picture...