Panasonic Hdc Sd80 Owners Manual

61VQT3J15
≥(Night scenery/Night portrait)
jThe shutter speed is 1/2 or more in Still Picture Recording Mode.
j Using a tripod is recommended.
≥ (Night portrait)
jThe Photo light is set to [ON].
Set the maximum zoom ratio for the Motion Picture Recording Mode.
≥ The larger the digital zoom magnification, the more the image quality is degraded.
≥This function cannot be used in Still Picture Recording Mode.
Switch the quality and recording format of the motion picture to record.
*1 Recording will have...

62VQT3J15
It is possible to continuously record motion picture to an SD card when there is no space 
available in the built-in memory. (It allows you to record only to SD card from built-in 
memory.)
≥Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC MODE] to [HA], [HG], [HX] or [HE]. ( l61)
≥ Insert an SD card.
≥  is displayed on the screen.    will disappear when space in the built-in memory is 
gone and the recording to the SD card starts.
≥ Relay recording can only be performed once.
≥ Combine the...

63VQT3J15
∫Registering a face for face recognition
≥Up to a maximum of 6 people can be registered.
1 Align the person’s face with the guide.≥Take a picture of the persons face from the front, 
ensuring that their hair does not hide the outline of 
their face, their eyes or their eyebrows.
2 Touch [REC] or press the   button fully.≥Touch [ENTER].
≥ It may not be possible to register a face depending 
on the recording conditions. In this case, try 
recording the face again.
3 Entering the person’s...

64VQT3J15
∫Changing the information of a registered person
1 Select the menu.
2 Touch the desired item to enter the setting.
≥Up to 3 face shots can be registered. To additionally register 
or to change/delete the registered face shots, touch   or 
the face shot.
≥ If you register several face shots of the same person (up to 3 
face shots can be registered), each with a different facial 
expression or different backgroun d, it is more likely that face recognition will be successful.
[SET NAME]:
Change...

65VQT3J15
When a registered person is detected by face recognition during recording, the name 
registered for that person is displayed.
≥Displayed name will disappear after a while.
≥ It is displayed according to the registration order setting from the first person.
≥ This function is not displayed during the recording of yourself or Playback Mode.
Detected faces appear with frames.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen 
take preference over others....

66VQT3J15
≥The AGS function may activate and cause the unit to pause the recording if you are 
recording a subject right above or right below you.
You can record bright pictures even in dark places by slowing the shutter speed.
≥ Switch to Manual Mode. ( l72)
≥ The shutter speed is set to 1/30 or more depending on the surrounding brightness.
≥This function cannot be used in Still Picture Recording Mode.
≥ When the shutter speed becomes 1/30, the screen may be seen as if frames are missed 
and afterimages...

67VQT3J15
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.≥Switch to Manual Mode. ( l72)
≥This function’s default setting is [ON].
≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the 
setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
Directivity of the microphone is synchronized with the zoom operation. Sounds near the front 
of the unit are recorded more clearly if...

68VQT3J15
≥When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be 
changed.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in 
microphones.
≥ You cannot record with the audio completely muted.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change...

69VQT3J15
The higher the number of pixels, the higher the clarity of the picture when printing.
∫Picture size and Maximum zoom ratio
Aspect ratio will change depending on the picture size.
* Extra optical zoom cannot be used. The maximum zoom magnification is 34 k.
∫ Picture size in Motion Picture Recording Mode
≥Change the mode to  .
≥This function’s default settings are [  3M] in Still Picture Recording Mode and   in 
Motion Picture Recording Mode.
≥ When you record still picture with [REC MODE]  set...

70VQT3J15
Selecting the picture quality.
Recording is done continuously at the rate of 30 or 60 still pictures per second.
Use this function to record an object with fast movement.
1 Select the menu.
2 Press the   button.
≥ flashes in red during recording.
≥ First press the   button halfway, then press it fully to set the focus and record. It will 
automatically focus if you press fully once, so it is convenient when recording objects 
moving back and forth.
3 Touch [Record] or [Delete].[Record]:...