Panasonic Hdc Sd5 Operating Instructions

61VQT1H62
Recording
The center of the screen is enlarged. The normal 
screen returns approximately 2 seconds after 
you finish bringing the subject into focus.
≥The center of the screen is not enlarged when 
[MF ASSIST] is [OFF].
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down 
again to the FOCUS position.
≥You can also restore the auto focusing by 
setting the AUTO/MANUAL/FOCUS switch to 
AUTO.
≥The subject may not be in focus when zoomed 
in if focusing with a wide angle....

62VQT1H62
Recording
≥Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [ ].
≥You can also restore the automatic adjustment 
by setting the AUTO/MANUAL/FOCUS switch 
to AUTO.
1Select [ ], fill the screen with a 
white subject.
2Move the cursor button up to 
select [ ].
≥When the [ ] display stops from flashing the 
setting is complete.
≥If the [ ] display continues flashing, the 
white balance cannot be set because it is too 
dark etc. In this case, use the...

63VQT1H62
Recording
Shutter Speed:
Adjust it when recording fast-moving subjects.
When recording people outdoors at night, select 
the auto slow shutter mode and use a flash. Both 
the subject and the background will become 
brighter.
Aperture:
Adjust it when the screen is too bright or too 
dark.
¬Rotate the mode dial to select  .
1Set the AUTO/MANUAL/FOCUS 
switch to MANUAL.
The icon shown in the illustration is displayed 
automatically.
2Move the cursor button left or 
right to select [ ] (aperture)...

64VQT1H62
Playback
Playback
Motion picture playback
Play back motion pictures.
1Rotate the mode dial to select 
.
The lens cover closes.
2Press the cursor button up and 
then select the [ ] (motion 
picture playback) tab.
AMotion picture playback tab
The motion pictures are displayed as thumbnails 
(reduced-size images).
3Select the scene to be played 
back.
BPrevious page
CNext page
DScene number
The selected scene will be encircled by a yellow 
frame.
≥If 9 or more scenes have been recorded, the 
next...

65VQT1H62
Playback
) cannot be played back. An error 
message appears and the screen shows the 
thumbnails.
≥The power will not turn off even if the LCD 
monitor is closed.
≥The date/time displayed may be different from 
the recording date/time and it may take time to 
display the thumbnail display when playing 
back motion pictures not recorded on this unit.
≥The remaining time for playback indication will 
be reset to “0h00m00s” each scene.
≥If you continuously record motion picture data 
that exceeds...

66VQT1H62
Playback
The motion picture is advanced one frame at a 
time.
1Move the cursor button up during 
playback to pause the playback.
2Move the cursor button right. 
(The frames will be advanced one 
at a time in the reverse direction 
when you move the cursor 
button left.)
≥Normal playback is restored when you move 
the cursor button up.
≥When the frames are advanced one at a time 
in the reverse direction, they will be shown in 
intervals of 0.5 seconds.
ªOperating with the remote 
control
1...

67VQT1H62
Playback
≥When [PLAY MODE] is set to [VIEW ALL], all 
recorded motion pictures will be played back in 
succession. ([ ] is displayed.)
≥Playing back all the scenes returns if the power 
is turned off or the mode dial is operated.
≥Even if scenes are recorded on the same day, 
they are grouped separately in the following 
cases.
jWhen the number of scenes exceeds 99
jWhen the card is repaired
jWhen the recording mode is changed from 
HN/HE to HG or HG to HN/HE (–1, –2... is 
added after the...

68VQT1H62
Playback
Still picture (JPEG images) 
playback
Play back the still pictures recorded on the card.
1Rotate the mode dial to select 
.
The lens cover closes.
2Press the cursor button up and 
then select the [ ] (still picture 
playback) tab.
AStill picture playback tab
The still pictures recorded on the SD card are 
displayed as thumbnails (reduced-size images).
3Select the file to be played back.
BPrevious page
CNext page
DFile number display
EFolder/file name
The selected file will be encircled...

69VQT1H62
Playback
≥Do not operate the mode dial during the slide 
show.
≥It takes time to display the file, and how long it 
will take depends on the number of pixels of 
the file.
≥Files which cannot be displayed as thumbnails 
(the thumbnails are displayed as  ) cannot 
be played back.
≥If you attempt to play back a file which is a 
different format or a damaged file, an error 
message appears and the screen shows the 
thumbnails.
≥The date/time displayed may be different from 
the recording date/time...

70VQT1H62
Editing
Editing
Editing scenes
The deleted scenes cannot be restored.
¬Rotate the mode dial to select   
and then select the [ ] (motion 
picture playback) tab.
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the cursor button.
¬Rotate the mode dial to select   
and then select the [ ] (motion 
picture playback) tab.
1Press the   button while the 
thumbnail view screen is 
displayed.
2Move the cursor button up or 
down to select [SELECT]...