Panasonic Hdc Sd5 Operating Instructions

111VQT1H62
Others
ªPlayback indications
Motion picture playback
Still picture playback
ªPC connection indications
ªConfirmatory indications
ªConfirmatory indications when a 
DVD burner is connected
1Playback
;Pause
5, /
6, Fast forward/rewind playback
7/8Last/first scene paused
9/:Skip playback
D/ESlow motion playback
;1/2;Frame-by-frame playback
0h00m00sPlayback time
Play mode
All scenes
Scenes recorded on the 
selected date
Number of recording pixels for 
motion pictures
1920k1080
1440k1080
No.10Scene...

Others
11 2VQT1H62
Messages
CANNOT RECORD.Data writing to the SD card has failed.
NO DATA.There are no motion pictures or still pictures recorded on the SD 
card.
If this message appears although data is recorded on the SD card, 
the condition of the card is probably not stable.
Turn off the power and then turn it on again.
CANNOT BE USED DUE TO 
INCOMPATIBLE DATA.
The recording format is different so it cannot be used. Save the data 
on the SD card to a computer, then use the SD card after formatting...

Others
113VQT1H62
When the SD card is accessed, you try to playback a scene or faulty control information is read, one of 
the messages below may be displayed. (Depending on the error, this may take time.)
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[FINISHED.]
When the remaining capacity of the battery is low:
[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[THUMBNAIL...

Others
11 4VQT1H62
When the remaining capacity of the battery is low:
[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If the recovery fails, you will no longer be able to playback the scenes recorded before the power 
went off.
≥When data recorded on another device is recovered, it may not be possible to play back the data on 
this unit or...

Others
115VQT1H62
Troubleshooting
ªUnit operations
ProblemCheck points
This unit cannot be 
turned on.≥Is the battery fully charged?
#Charge it with the AC adaptor. (l26)
≥The battery protection circuit may have operated. Attach the battery 
to the AC adaptor for 5 to 10 seconds. If the unit still cannot be 
used, the battery is faulty.
≥Make sure the LCD monitor is opened.
This unit is turned off 
automatically.≥If you do not use the unit for approximately 5 minutes, the power is 
automatically turned...

Others
11 6VQT1H62
This unit cannot be 
operated though 
powered up.
This unit does not 
operate normally.≥The unit cannot be operated if the LCD monitor is not opened.
≥Press the RESET button. (l118) If normal conditions are not 
restored yet, remove the battery or AC adaptor, wait about 1 minute 
and then reconnect the battery or AC adaptor. Then about 1 minute 
later, turn on the power again. (Conducting the above operation 
while the card is being accessed may damage the data on the 
SD card.)
The...

Others
117VQT1H62
Recorded still pictures 
are not clear.≥Are you trying to record small or finely detailed objects with 
[PICT. QUALITY] set at [ ]?
#If you try to record small or finely detailed objects with 
[PICT. QUALITY] set at [ ], the images may break up into a 
mosaic-like pattern. Record with [PICT. QUALITY] set at [ ] 
instead. (l48)
Sound is not played back 
from the built-in speaker 
of this unit.≥Is the volume too low?
#During playback, move the volume lever to display the volume...

Others
11 8VQT1H62
If the SD card is inserted 
in another device, it is not 
recognized.≥Check that the device is compatible with the capacity or type of SD 
card (SD Memory Card/SDHC Memory Card) that you inserted. 
(l24)
#Refer to the operating instructions of the device for details.
The indication 
disappears.
The screen is frozen.
No operation can be 
performed.≥Is this unit connected to a computer?
#No operation can be performed on this unit when it is connected 
to a computer.
≥Turn off the power...

Others
119VQT1H62
ªWhen connected to another device
ªWith a computer
ProblemCheck points
EZ Sync does not work.≥Are you connecting with the component cable or the AV cable?
#Connect with a HDMI cable (optional). (l79)
≥Is the [EZ Sync] setting appropriate?
#Press the MENU button, then select [SETUP] # [EZ Sync] # 
[ON] with the cursor button.
≥Depending on HDMI terminal of the TV, the input channel may not 
switch automatically. In this case, use the remote control for the TV 
to switch input. (For...

Others
120VQT1H62
The images may be still for several seconds at the joins between the scenes if the following operations 
are performed when multiple scenes have been continuously played back using another unit.
* Just how smoothly the scenes will be played back depends on the playback unit. Depending on the 
unit used, the images may stop moving and become still for a moment even when none of the 
following conditions are applicable.
ªWhen the scenes were recorded on different dates
AThe image will be...