Panasonic Hdc Sd40 Owners Maual Manual

							until 
2011/2/10
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, 
contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
Owner’s Manual
High Definition Video Camera
Model No.HDC-SD40P/PC
HDC-TM40P/PC
HDC-TM41P/PC
Before connecting, operating or adjusting this product, please read the instructions completely.
VQT3J95
HDC-SD40&TM40P_PC_VQT3J95_mst.book  1 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							2VQT3J95
Things You Should 
Know
Thank you for choosing Panasonic!
You have purchased one of the most 
sophisticated and reliable products on 
the market today. Used properly, we’re 
sure it will bring you and your family 
years of enjoyment. Please take time to 
fill in the information on the right.
The serial number is on the tag located 
on the underside of your camera. Be 
sure to retain this manual as your 
convenient camera information source.
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR 
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS 
VASES, SHALL BE PLACED ON THE APPARATUS.
≥ USE ONLY THE RECOMMENDED ACCESSORIES.
≥
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN 
ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO 
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, 
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE 
VENTILATION VENTS.
Date of Purchase 
Dealer Purchased From 
Dealer Address
Dealer Phone No. 
Model No.
Serial No.
HDC-SD40&TM40P_PC_VQT3J95_mst.book  2 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							3VQT3J95
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
THE FOLLOWING APPLIES ONLY IN CANADA.FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures:
≥
Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation 
instructions and use only shielded interface cables with ferrite 
core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: HDC-SD40P/HDC-TM40P/HDC-TM41P
Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.
This Class B digital apparatus complies with Canadian ICES-003.
HDC-SD40PHDC-TM40PHDC-TM41P
HDC-SD40&TM40P_PC_VQT3J95_mst.book  3 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							4VQT3J95
∫Concerning the battery
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V.
But
≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power 
supply only.
≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to 
suit the AC outlet configuration.
≥ When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited 
to the voltage of the AC supply and the rated current of the AC adaptor.
≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug 
adaptor or AC cord set.
The unit should be installed near an accessible AC power outlet, with the power cord 
connected directly to it.
To completely disconnect power from the unit,  unplug the power cord from the AC power 
outlet.
Battery pack (Lithium ion battery pack)
≥ Use the specified unit to recharge the battery pack.
≥ Do not use the battery pack with equipment other than the specified unit.
≥ Do not get dirt, sand, liquids, or  other foreign matter on the terminals.
≥ Do not touch the plug terminals ( i and  j) with metal objects.
≥ Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with yo ur hands or clothes, wash it off thoroughly 
with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes 
thoroughly with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60  oC (140  oF) or 
incinerate.
HDC-SD40&TM40P_PC_VQT3J95_mst.book  4 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							5VQT3J95
∫Product Identification Marking
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or 
equivalent type recommended by the manufacturer. Dispose of used batteries according 
to the manufacturer’s instructions.
Product Location
High Definition Video Camera Battery holder
AC adaptor Bottom

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – 
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
.
A lithium ion/polymer battery that is recyclable powers the product 
you have  purchased. Please call 1-800-8-BATTERY for information 
on how to recycle this battery.
U.S.A./CANADA CONSUMERS:  ATTENTION:
HDC-SD40&TM40P_PC_VQT3J95_mst.book  5 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							6VQT3J95
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety 
instructions on the unit and the applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
8) Do not install near any heat sources  such as radiators, heat registers, 
stoves, or other apparatus (including 
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the  polarized or grounding-type plug. A 
polarized plug has two blades with one 
wider than the other. A grounding-type 
plug has two blades and a third 
grounding prong. The wide blade or the 
third prong are provided for your safety. 
If the provided plug does not fit into your 
outlet, consult an electrician for 
replacement of the obsolete outlet.
10) Protect the power cord from being  walked on or pinched particularly at 
plugs, convenience receptacles, and the 
point where they exit from the 
apparatus. 11) Only use attachments/accessories 
specified by the manufacturer.
12) Use only with the  cart, stand, tripod, 
bracket, or table 
specified by the 
manufacturer, or 
sold with the 
apparatus. When a 
cart is used, use caution when moving 
the cart/apparatus combination to avoid 
injury from tip-over.
13) Unplug this apparatus during lightning  storms or when unused for long periods 
of time.
14) Refer all servicing to qualified service  personnel. Servicing is required when 
the apparatus has been damaged in any 
way, such as power-supply cord or plug 
is damaged, liquid has been spilled or 
objects have fallen into the apparatus, 
the apparatus has been exposed to rain 
or moisture, does not operate normally, 
or has been dropped.
HDC-SD40&TM40P_PC_VQT3J95_mst.book  6 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							7VQT3J95
Precautions
USE & LOCATION
≥TO AVOID SHOCK HAZARD ... Your 
camera and power supply should not be 
exposed to rain or moisture. Do not 
connect the power supply or operate your 
camera if it gets wet. Your camera has 
been designed for outdoor use, however it 
is not designed to sustain direct exposure 
to water, rain, sleet, snow, sand, dust, or a 
direct splashing from a pool or even a cup 
of coffee. This action could permanently 
damage the internal parts of your camera. 
Do not attempt to disassemble this unit. 
There are no user serviceable parts 
inside. Unplug your camera from the 
power supply before cleaning.
≥ AS WITH ANY SMALL OBJECT, SD 
CARDS CAN BE SWALLOWED BY 
YOUNG CHILDREN. DO NOT ALLOW 
CHILDREN TO HANDLE THE SD CARD.
≥ DO NOT AIM YOUR CAMERA AT THE 
SUN OR OTHER BRIGHT OBJECTS
≥ DO NOT EXPOSE YOUR CAMERA TO 
EXTENDED HIGH TEMPERATURE  ... 
Such as, in direct sunlight, inside a closed 
car, next to a heater, etc... This action 
could permanently damage the internal 
parts of your camera.
≥ AVOID SUDDEN CHANGES IN 
TEMPERATURE  ... If the unit is suddenly 
moved from a cold place to a warm place, 
moisture may form on the SD card and 
inside the unit.
≥ DO NOT LEAVE YOUR CAMERA OR 
THE POWER SUPPLY TURNED ON 
WHEN NOT IN USE. ≥
STORAGE OF YOUR CAMERA  ... Store 
and handle your camera in a manner that 
will not subject it to unnecessary 
movement (avoid shaking and striking). 
Your camera contains a sensitive pick-up 
device which could be damaged by 
improper handling or storage.
CARE
≥ TO CLEAN YOUR CAMERA ... Do not 
use strong or abrasive detergents when 
cleaning your camera body.
≥ TO PROTECT THE LENS  ... Do not touch 
the surface of the lens with your hand. 
Use a commercial camera lens solution 
and lens paper when cleaning the lens. 
Improper cleaning can scratch the lens 
coating.
≥ TO PROTECT THE FINISH OF YOUR 
CAMERA ... Before handling your 
camera, make sure your hands and face 
are free from any chemical products, such 
as suntan lotion, as it may damage the 
finish.
-If you see this symbol-
WARNING
CAUTION
Information on Disposal in other 
Countries outside the European 
Union
This symbol is only 
valid in the European 
Union.
If you wish to discard 
this product, please 
contact your local 
authorities or dealer 
and ask for the correct 
method of disposal.
HDC-SD40&TM40P_PC_VQT3J95_mst.book  7 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							8VQT3J95
∫About the recording format for 
recording motion pictures
You can select from either AVCHD or iFrame 
recording formats to record motion pictures 
using this unit. ( l54)
AVCHD:
You can record high definition quality images 
with this format. It is suitable for viewing on a 
large format TV or for saving to disc.
iFrame:
This is a recording format suitable for 
playing back or editing on Mac (iMovie’11). 
Using iMovie’11, iFrame motion pictures can 
be imported faster than AVCHD motion 
pictures. Also, the imported file size of 
iFrame motion pictures will be smaller than 
that of AVCHD motion pictures.
≥ It is not compatible with motion picture 
recorded in AVCHD format.
∫ Indemnity about recorded 
content
Panasonic does not accept any 
responsibility for damages directly or 
indirectly due to any type of problems that 
result in loss of recording or edited content, 
and does not guarantee any content if 
recording or editing does not work properly. 
Likewise, the above also applies in a case 
where any type of repair is made to the unit
(including any other non-built-in memory 
related component).
∫Handling of built-in memory 
[HDC-TM40/HDC-TM41]
This unit is equipped with the built-in 
memory. When using this component, pay 
attention to the following points.
Back up data periodically.
The built-in memory is temporary storage. In 
order to avoid erasing data due to static 
electricity, electromagnetic waves, 
breakage, and failures, back up the data to a 
PC or DVD disc. ( l86)
≥ Access lamp [ACCESS] ( l17) 
illuminates while the SD card or built-in 
memory is being accessed (initialization, 
recording, playback, deleting etc.). Do not 
perform the following operations when the 
lamp illuminates. It may damage the built-
in memory or cause a malfunction in the 
unit.
j Turn the unit off (remove the battery)
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
≥ About disposing of or giving away this unit. 
(l 109)
∫ Cards that you can use with 
this unit
SD Memory Card, SDHC Memory Card 
and SDXC Memory Card
≥4 GB or more Memory Cards that do not 
have the SDHC logo or 48 GB or more 
Memory Cards that do not have the SDXC 
logo are not based on SD Memory Card 
Specifications.
≥ Refer to page 24 for more details on SD 
cards.
HDC-SD40&TM40P_PC_VQT3J95_mst.book  8 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							9VQT3J95
∫For the purposes of this 
owner’s manual
≥SD Memory Card, SDHC Memory Card 
and SDXC Memory Card are referred to 
as the “SD card”.
≥ Functions that can be used for motion 
picture recording/motion picture playback 
are indicated by   in this owner’s 
manual.
≥ Functions that can be used for still picture 
recording/still picture playback are 
indicated by   in this owner’s 
manual.
≥ Pages for reference are indicated by an 
arrow, for example:  l00
This owner’s manual is designed for use 
with  models ,   and 
. Pictures may be slightly 
different from the original.
≥ The illustrations used in this owner’s 
manual show model  , 
however, parts of the explanation refer 
to different models.
≥ Depending on the model, some 
functions are not available.
≥ Features may vary, so please read 
carefully.
≥ Not all models may be available 
depending on the region of purchase.
HDC-SD40&TM40P_PC_VQT3J95_mst.book  9 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分 
						

							10VQT3J95
Accessories ............................................. 12
Quick Guide ............................................. 13
Preparation
Parts identification and handling .......... 17
Power supply........................................... 20Inserting/removing the battery...........  20
Charging the battery .........................  21
Charging and recording time .............  22
Recording to a card ................................ 24 Cards that you can use with this 
unit ....................................................  24
Inserting/removing an SD card..........  25
Turning the unit on/off ............................ 26 Turning the unit on and off with the 
power button .....................................  26
Turning the unit on and off with the 
LCD monitor ......................................  26
Selecting a mode .................................... 27
Setting date and time.............................. 28
Basic
Before recording ..................................... 29
Selecting a media to record 
[HDC-TM40/HDC-TM41] .......................... 30
Recording motion pictures .................... 31
Recording still pictures .......................... 33
Intelligent Auto Mode ............................. 34
Motion picture/Still picture 
playback .................................................. 36
Using the menu screen .......................... 39
Using the Setup Menu ............................ 40
Advanced (Recording)
Zoom in/out function .............................. 47
Optical image stabilizer function .......... 48
Recording with the video light .............. 48
Recording functions of operation 
icons ........................................................ 49 Operation icons .................................  49
Recording functions of menus .............. 53
Manual recording .................................... 59 White balance ...................................  59
Manual shutter speed/
iris adjustment ...................................  61
Recording with Manual focus ............  62
Advanced (Playback)
Playback Operations .............................. 63Motion picture playback using 
operation icon ...................................  63
Creating still picture from motion 
picture ...............................................  64
Repeat playback ...............................  64
Resuming the previous playback ......  65
Zooming in on a still picture during 
playback (Playback zoom) ................  65
Various playback functions ................... 66
Playing back motion pictures/
still pictures by date ..........................  66
Changing the playback settings and 
playing back the slide show ..............  67
Deleting scenes/still pictures ................ 69 Dividing a scene (AVCHD) ................  71
Dividing a scene to partially delete 
(iFrame) ............................................  72
Protecting scenes/still pictures .........  73
Watching Video/
Pictures on your TV ................................ 74 Connecting with a HDMI mini 
cable .................................................  77
Connecting with the AV multi 
cable .................................................  77
Playback using VIERA Link
™................ 78
Contents
HDC-SD40&TM40P_PC_VQT3J95_mst.book  10 ページ  ２０１１年１月２０日　木曜日　午前１１時４９分