Panasonic Hdc Sd10 Operating Instructions

							81VQT2H52
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-4.
When you stop deleting halfway
Touch [CANCEL] or press the MENU button 
while deleting.
≥The scenes or still pict ures that have already 
been deleted when the deletion is canceled 
cannot be restored.
To complete editing
Press the MENU button.
≥ You can also delete scenes by pressing the 
MENU button, selecting [EDIT SCENE]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ You can also delete still pictures by pressing 
the MENU button, selecting [PICT. SETUP]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ When the Intelligent Scene Selection or 
Highlight Playback is selected, scenes cannot 
be deleted.
≥ To delete an unwanted part of a scene, divide 
the scene first, and then delete the 
unnecessary part. ( l82)
≥ Scenes/still pictures which cannot be played 
back (the thumbnails are displayed as  ) 
cannot be deleted.
≥ In case of [ALL SCENES], the deletion may 
take time if there are many scenes or still 
pictures.
≥ When you delete scenes/still pictures, use a 
battery with sufficient battery power or use the 
AC adaptor.
≥ If you delete scenes recorded on other 
products or still pictures conforming to DCF 
standard with this unit, all the data related to 
the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by 
other products are deleted,  a still picture (other 
than JPEG) that cannot be played back on this 
unit may be erased.
HDCSD10_TM10_TM15P-VQT2H52_eng.book  81 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							82VQT2H52
Playback
Editing
2
Dividing a scene to partially 
delete
To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary 
portion.
¬ Change the mode to  .
1Touch the play mode select icon 
to select the desired media to 
divide a scene. 
(l 70)
2Select the menu. ( l29)
3Touch the scene to be divided.
4Touch   to set the dividing 
point.
≥Using slow-motion playback or frame-by-frame 
playback makes it easy to search for the point 
where you want to divide the scene. ( l71)
≥ When the confirmation message appears, 
touch [YES].
≥ Touch [YES] to continue dividing the same 
scene. To continue dividing other scenes, 
touch [NO] and repeat steps 3-4.
5Press the MENU button to 
complete dividing.
6Delete the unnecessary scene. 
(l 80)
To delete all the divided points
≥When the confirmation message appears, 
touch [YES].
≥ All divided points set on this unit will be 
canceled.
≥ The scenes that were deleted after division 
cannot be recovered.
≥When [INTEL. SCENE] is selected, scenes 
cannot be divided.
≥ Scenes cannot be divided if the number of 
scenes played back on a selected date has 
reached 99.
≥ It may not be possible to divide scenes with a 
short recording time.
≥ Data that has been recorded or edited on 
another device cannot be divided and the 
divided points cannot be deleted.
[EDIT SCENE]  # [DIVIDE] # [SET]
0h00m00s 0h00m00s
0h00m00s
[DIVIDE] # [CANCEL ALL]
HDCSD10_TM10_TM15P-VQT2H52_eng.book  82 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							83VQT2H52
Playback
Editing
3
Protecting scenes/still 
pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
¬Change the mode to  .
1Select the menu. ( l29)
2Touch the scene/still picture to 
be protected.
≥When touched, the scene/still picture is 
selected and the   indication appears on the 
thumbnail. Touch the scene/still picture again 
to cancel the operation.
≥ Press the MENU button to complete the 
settings.
≥When [INTEL. SCENE] is selected while 
playing back motion pictures, scenes cannot 
be protected.
[VIDEO SETUP] or [PICT. SETUP]  # 
[SCENE PROTECT]  # [YES]
HDCSD10_TM10_TM15P-VQT2H52_eng.book  83 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							84VQT2H52
Playback
Editing
4
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto 
the SD card.
¬ Change the mode to   and touch the play mode select icon to select [PICTURE/
SD CARD]. ( l77)
∫ What is DPOF?
DPOF (Digital Print Order Format) is a format 
which allows the user of a digital camera to 
define which captured images on the SD card 
are to be printed, together with information on the 
number of copies they  wish to print. (Please 
note: Not all commercial printing services 
support this feature at this time.)
1Select the menu. ( l29)
2Touch the still picture to be set.
3Touch  /  to set the number of 
prints.
≥Up to 999 prints can be selected. (Prints for set 
number can be printed with a printer that 
supports DPOF.)
≥ To cancel the setting, set the number of prints 
to [0].
4Touch [ENTER].
≥To continuously set ot her still pictures, repeat 
steps 2-4.
≥ Press the MENU button to complete the 
settings.
To cancel all DPOF settings
≥When the confirmation message appears, 
touch [YES].
≥Copy still pictures saved in the built-in memory 
to an SD card before setting DPOF.
≥ You cannot add the recording date to pictures 
to be printed with the DPOF settings.
[PICT. SETUP]  # [DPOF SET]  # [SET][DPOF SET] # [CANCEL ALL]
HDCSD10_TM10_TM15P-VQT2H52_eng.book  84 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							85VQT2H52
Playback
Editing
5
Copying between SD card and Built-in 
Memory 
[HDC-TM10/HDC-TM15]
Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in 
this unit and a built-in memory.
≥If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards 
following the instruction on the screen. 
In this case, the last scene copied to an SD card is automatically divided to fit the space on the SD 
card.
≥ If you divide the scenes ( l82), and copy by scene selection, it  is possible to copy matching the 
remaining capacity of the media, or only the necessary parts.
∫ Media information display
¬Change the mode to   and touch the play mode select icon to select desired 
media to confirm the media information. ( l70, 77)
Select the menu. ( l29)
SD card information display
Built-in memory information display
≥Touch [EXIT] or press the MENU button to close the indication.
/
≥ The 8 GB/16 GB built-in memory requires some space to store information and manage system files, 
so the actual usable space is slightly less than the indicated value. The usable built-in memory space 
is generally calculated as 1 GB=1,000,000,000 bytes.  The capacities of this unit, PCs and software 
are expressed as 1 GB=1,024 k1,024 k1,024=1,073,741,824 bytes. Therefore, the indicated value of 
the capacity appears to be smaller.
Confirming remaining capacity on the copy destination
[SETUP]  # [CARD STATUS]  # [YES]
[SETUP]  # [Built-in Memory STATUS]  # [YES]
HDCSD10_TM10_TM15P-VQT2H52_eng.book  85 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							86VQT2H52
≥If there is not much remaining capacity in the SD card, a confirmation message asking to copy after 
deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
≥ Refer to page 87 for approximate time for copying.
1Change the mode to  .
≥Use a sufficiently charged battery or the AC 
adaptor.
2Select the menu. ( l29)
(When copying from built-in memory to SD card)
(When copying from SD card to built-in memory)
≥When there are relay-recorded scenes in the 
built-in memory, a message appears on the 
screen. Before copying, store all of the relay 
scenes in the SD card. ( l88)
3Touch the desired item.
[Video&Picture]:
All scenes are copied in or der of motion pictures, 
then still pictures.
Proceed to step 7.
[VIDEO]:
Motion pictures are copied.
[PICTURE]:
Still pictures are copied.
4(Only when [VIDEO]/[PICTURE] is selected 
in step 3)
Touch the desired item.
[ALL SCENES]:
All motion pictures or still pictures are copied.
Proceed to step 7.
[SELECT SCENES]:
Some motion pictures or still pictures are 
selected for copying.
[SELECT DATE]:
Copy by selecting the date.
5(Only when [SELECT SCENES] is selected 
in step 4)
Touch the scene/still picture to 
be copied.
≥ When touched, the scene/still picture is 
selected and the   indication appears on the 
thumbnail. Touch the scene/still picture again 
to cancel the operation.
≥ Up to 99 scenes/still pictures can be set in 
succession.
Copying
[COPY]  # []  # [YES]
[COPY]  # []  # [YES]
HDCSD10_TM10_TM15P-VQT2H52_eng.book  86 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							87VQT2H52
(Only when [SELECT DATE] is selected in 
step 4)
Touch the date to be copied.
≥When touched, the date is selected and 
surrounded by red. Touch the date again to 
cancel the operation.
≥ Up to 99 dates can be set in succession.
6(Only when [SELECT SCENES]/
[SELECT DATE] is selected in step 4)
Touch [Enter]/[ENTER].
7When the confirmation message 
appears, touch [YES].
≥If 2 or more SD cards are necessary to copy, 
change the card following the instructions on 
the screen.
8Touch [EXIT] when the copy 
complete message is displayed.
≥The thumbnail view of the copy destination is 
indicated.
When you stop copying halfway
Touch [CANCEL] or press the MENU button 
while copying.
≥It is impossible to compress motion pictures or 
still pictures on the copy source into the 
capacity that can be accommodated by the 
usable space on the copy destination.
≥ Depending on the following conditions, the 
time it takes for copying may be longer.
jThe number of recorded scenes is large.
j The temperature of the unit is high.
≥ If some motion pictures or still pictures have 
already been recorded to the copy destination, 
then the same date may be assigned or 
images may not display by date when the list 
by date is selected.
≥ Motion pictures that have been recorded on 
another device may not be copied. Data 
recorded on a PC with HD Writer AE 1.5, etc. 
cannot be copied.
≥ Protection and DPOF settings will be cleared 
on the copied motion pictures and still pictures 
when copying motion pictures and still pictures 
with protection and DPOF settings.
≥ The order in which the scenes or still pictures 
were copied cannot be changed.
Approximate time for copying
To copy a 4 GB SD card with full motion 
pictures to a built-in memory:
10 min to 20 min
To copy 600 still pictures (approx. 
600 MB):
5min to 10min
If you will delete the motion pictures or still 
pictures after copying is complete, be sure 
to play back the motion pictures or still 
pictures to check that they have been 
copied to correctly before deleting.
HDCSD10_TM10_TM15P-VQT2H52_eng.book  87 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							88VQT2H52
Playback
Editing
6
Relay scene combining 
[HDC-TM10/HDC-TM15]
You can combine the relayed scene (l 58) in the built-in memory and the continued scene in the 
SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of relay recording
≥ Change the mode to   and touch the play mode select icon to select the desired media. 
(l 70)
1Insert the SD card that was used 
for relay recording.
2Select the menu. ( l29)
3When the confirmation message 
appears, touch [YES].
≥Combine the relayed scenes into a SD 
card.
≥ Scene in the built-in memory will be 
deleted.
4Touch [EXIT] when the relay 
scene combining complete 
message is displayed.
≥The thumbnail view of the SD card is 
indicated. ≥
Relay recording information will be deleted 
when the relay scenes are combined, and 
relay recording will be possible again.
≥ When the relayed scenes in the built-in 
memory or SD card are deleted, combining 
of the relayed scenes will not be possible.
To cancel relay information
≥When the relay information is canceled, 
combining of the relayed scenes will not be 
possible anymore.
≥ When the confirmation message appears, 
touch [YES].
Relay recorded sceneRelay scene combining
[COPY]  # [RELAY SCENE COMBINE] # 
[YES]
[COPY]  # [RELAY INFO CANCEL]  # [YES]
Combining of the relay scene cannot be 
performed if the available space on the SD 
card is less than the volume of the relayed 
scene in the built-in memory. It is 
recommended to combine the relay scene 
using a DVD burner or the HD Writer AE 1.5.
HDCSD10_TM10_TM15P-VQT2H52_eng.book  88 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							89VQT2H52
Playback
Editing
7
Formatting
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l96, 107)
¬Change the mode to   or  , and select desired media to be formatted. ( l42, 
70, 77)
Select the menu. ( l29)
Formatting SD cards
/
Formatting Built-in memory
≥ When the confirmation message appears, touch [YES].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
/
≥ Perform a physical formatting of the built-in memory when this unit is to be disposed/transferred. 
(l 134)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations 
or shock.
[SETUP] 
# [FORMAT CARD]  # [YES]
[SETUP]  # [FORMAT Built-in Memory]  # [YES]
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may not be used 
on this unit.
HDCSD10_TM10_TM15P-VQT2H52_eng.book  89 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							90VQT2H52
Playback
With a TV
1
Watching Video/Pictures on 
your TV
≥Use the supplied component cable and AV cable. Us e of the following Panasonic HDMI mini cables is 
recommended to connect the unit to the HDMI terminal.
≥ Do not simultaneously connect an HDMI mini  cable and Component cable to this unit.
1Connect this unit to a TV.
Confirm the terminals on your TV 
and use a cable compatible with 
the terminals. Image quality may 
vary with the connected terminals.
1High quality
2 HDMI terminal
3 Component terminal
4 Video terminal
0â0Ð0÷
0â0Ð0÷
AHDMI mini cable 
(optional)
B Component cable 
(supplied)
C AV cable (supplied)
Picture quality
1 High definition images 
when connecting to 
HDMI terminal
2 High definition images 
when connecting to 
component terminal 
compatible with 1080i
Standard images when 
connecting to 
component terminal 
compatible with 480i
3 Standard images when 
connecting to video 
terminal
HDCSD10_TM10_TM15P-VQT2H52_eng.book  90 ページ  ２００９年７月６日　月曜日　午後１時４６分