Panasonic Hdc Sd10 Operating Instructions

							71VQT2H52
∫Change the thumbnail display
During step 3, the thumbnail display changes in 
the following order if the zoom lever is operated 
to 
_ side or ` side.
20 scenes  () 9 scenes  () 1 scene
()  Highlight&Time frame index
≥ Refer to page 73 for information about 
Highlight&Time frame index.
≥ 9 scenes display returns if the power is turned 
off or the mode is changed.
≥ It is possible to operate with the adjust zoom 
button.
≥ Switch to 1 scene display to check the 
recording date and recording time.
∫ Speaker volume adjustment
Move the volume lever to adjust the speaker 
volume during playback.
To w a r d s  “ r”:
Increases the volume
To w a r d s  “ s”:
Decreases the volume
≥ It is possible to operate with the adjust zoom 
button.
∫ Fast forward/rewind playback
Touch  5 during playback to fast forward.
(Touch  6 to rewind.)
≥ The fast forward/rewind speed increases if you 
touch  5/6  again. (The display on the 
screen changes from  5 to  .)
≥ Normal playback is restored when you touch 
.
∫Slow-motion playback
1 Pause the playback.
≥When the operation icon disappears, touch 
the screen to display the icon again.
2 Continue touching  .
(  is for slow rewind playback)
Playback is slow while touching.
≥ Normal playback is restored when you touch 
.
≥ When slow-motion pictures are played back in 
reverse, they will be shown continuously at 
approximately 2/3
rd the speed of normal 
playback (intervals of 0.5 seconds).
F
F
HDCSD10_TM10_TM15P-VQT2H52_eng.book  71 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							72VQT2H52
∫Frame-by-frame playback
The motion picture is advanced one frame at a 
time.
1 Pause the playback.
≥When the operation icon disappears, touch 
the screen to display the icon again.
2Touch . (Touch   to advance the frames one at a 
time in the reverse direction.)
≥ Normal playback is restored when you touch 
.
≥ When the frames are advanced one at a time 
in the reverse direction, they will be shown in 
intervals of 0.5 seconds.
∫ Direct playback
1Touch  1 to display the direct playback 
bar.
2 Touch the direct playback bar A .
≥ The playback is paused and the image is 
skipped until the position you touched.
≥ Playback starts again when you release the 
touch screen.
≥ Touch  2 to display the operation icon.
≥Sound will be heard only during normal 
playback.
≥ If pause play is continued for 5 minutes, the 
screen returns to the thumbnails.
≥ Any scenes where the thumbnails are 
displayed as   cannot be played back.
≥ The elapsed time for playback indication will be 
reset to “0h00m00s” for each scene.
F
F
F
Motion picture compatibility
≥ This unit is based on the AVCHD format.
≥ The video signal that can be played back on 
this unit is 1920 k1080/60i, 1920 k1080/24p 
or 1440k1080/60i.
≥ This unit may degrade or not play back 
motion pictures recorded or created on 
other products, and other products may 
degrade or not play back motion pictures 
recorded on this unit, even if the products 
support AVCHD.
HDCSD10_TM10_TM15P-VQT2H52_eng.book  72 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							73VQT2H52
A single frame from the recorded motion picture 
can be saved as a still picture.
1Pause at the scene you want to 
save as a still picture during 
playback.
≥It is convenient to use slow-motion playback 
and frame-by-frame playback.
2Press the   button fully.
Still picture is recorded.
(/
Still picture is recorded and will be saved on the 
same media as the motion picture.)
≥Date the motion picture was recorded will be 
registered as date of the still picture.
≥ Quality will be different from the normal still 
picture. An image of one scene is displayed as a 
thumbnail at set time interval. Scene can be 
played back from any midway point of the scene 
you wish to see.
≥
Move the zoom lever to  i side and change 
over the thumbnail display to Highlight&Time 
frame index. ( l71)
1Touch the set time selection.
A Set time selection
B Scene selection
≥ Next (previous) scene can be displayed by 
touching / .
2Touch and select time to be set.
≥A portion judged to be clearly recorded will be 
detected and displayed in thumbnail if you 
select [HIGHLIGHT]. The thumbnail may not 
be displayed if the part recognized as clearly 
recorded cannot be detected.
3Touch the thumbnail to be played 
back.
≥Next (previous) thumbnail can be displayed by 
touching / .
Creating still picture from 
motion pictureHighlight&Time frame index
HDCSD10_TM10_TM15P-VQT2H52_eng.book  73 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							74VQT2H52
Scenes recorded on the same day can be played 
back in succession.
1Touch the date select icon.
ADate select icon
2Touch the playback date.
The scenes recorded on the date selected are 
displayed as thumbnails.
3Touch the scene to be played 
back.
≥Playing back of all the scenes returns if the 
power is turned off or the mode is changed.
≥ Even if scenes are recorded on the same day, 
they are grouped separately in the following 
cases.
jWhen the number of scenes exceeds 99
j When the media is repaired
j When the recording mode is changed from 
HA/HG/HX to HE
* or HE to HA/HG/HX*
* –1, –2... is added after the recording date 
displayed on the screen. Play back the scenes excluding a portion of the 
scene judged to have failed to shoot due to fast 
movement of this unit, camera shake, or focus 
error.
1Touch .
2Touch [INTEL. SCENE].
3Touch the scene to be played 
back.
≥
Up to 9 sections can be skipped for a single 
scene.
≥ When motion pictures are skipped, the image 
stops momentarily.
≥ The position of sections to be skipped may 
vary depending on the type of recording, with 
some having no skipped parts.
≥ Divided scene will not be skipped.
≥ Playing back all the scenes returns if the power 
is turned off or the mode is changed.
≥ For data that are edited with the editing 
function of HD Writer AE 1.5, the Intelligent 
scene selection is disabled.
≥ Deletion of scenes cannot be done during the 
Intelligent scene selection.
≥ Highlight&Time frame index display does not 
appear.
Playing back motion 
pictures by date

Intelligent scene selection
HDCSD10_TM10_TM15P-VQT2H52_eng.book  74 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							75VQT2H52
Part that was recognized as clearly recorded is 
extracted from a long recording, and it can be 
played back in short time with music added.
1Touch .
2Touch [HIGHLIGHT].
3Touch the desired item.
[SCENE SETUP]:
Select the scene or date to be played back.
[PLAYBACK TIME]:
Select the time to play back. (l76)
[MUSIC SELECT]:
Select the music to be played on playback. 
(l 76)
4Touch [START].
≥The playback time is displayed, and the unit is 
put into playback pause.
5Select the playback operation. 
(l 70)
≥When the playback is finished or stopped, the 
screen to select [REPLAY], [SELECT AGAIN] 
or [EXIT] is displayed.
Touch the desired item.
∫ Scene setting
1) Touch [SELECT SCENES] or 
[SELECT DATE].
2) (When [SELECT SCENES] is selected) Touch the scene to be played back.
≥ Up to 99 scenes can be selected in 
succession.
≥ When touched, the scene is selected and   is 
displayed. Touch the scene again to cancel the 
operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥ A maximum of 7 days can be selected.
≥ When touched, the date is selected and 
surrounded by red.
Touch the date again to cancel the operation.
3) Touch [Enter]/[ENTER] to complete the  settings.Highlight playback
F
HDCSD10_TM10_TM15P-VQT2H52_eng.book  75 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							76VQT2H52
∫Playback time setting
Touch the playback time to set.
≥ The playback time of [AUTO] is a maximum of 
approx. 5 minutes.
≥ Playback time may become shorter than the 
setting, or it may not even play back if the part 
recognized as clearly recorded is short.
∫ Music setting
1) Touch your favorite music.
≥When [NO MUSIC] is selected, the audio 
recorded at the time of shooting is played back.
2) Touch [ENTER].
To test the music audio: Touch [START] and start the audio testing.
≥ Touch the other music option to change the 
music to be tested.
≥ When you touch [STOP], the music playback 
stops.
≥ When you touch [ENTER], the music being 
tested is set.
≥The scene in the vicinity of the split may not 
play back when the scene is split. ( l82)
≥ Playing back of all the scenes returns if the 
power is turned off or the mode is changed. Playback of the first scene starts after playback 
of the last scene finishes.
Select the menu. (
l29)
The   indication appears on the full screen 
views.
≥All the scenes are played back repeatedly. 
(When playing back motion pictures by date, 
all the scenes on the selected date are played 
back repeatedly.)
If playback of a scene was stopped halfway, the 
playback can be resumed from where it was 
stopped.
Select the menu. ( l29)
If playback of a motion picture is stopped,   
appears on the thumbnail view of the stopped 
scene.
≥This function’s default setting is [ON].
≥The memorized resume position is cleared if 
you turn off the power or change the mode.
(The setting of [RESUME PLAY] does not 
change.)
Repeat playback
[VIDEO SETUP]  # [REPEAT PLAY]  # [ON]
Resuming the previous 
playback
[VIDEO SETUP]  # [RESUME PLAY]  # [ON]
HDCSD10_TM10_TM15P-VQT2H52_eng.book  76 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							77VQT2H52
Playback
Playback
2
Still picture playback
1Change the mode to  .
2Touch the play mode select icon 
A to select desired media to be 
played back.
≥ Touch [PICTURE/SD CARD] to play back the 
SD card.
/
Touch [PICTURE/Built-in Memory] to play back 
the built-in memory.
3Touch the still picture to be 
played back.
The selected still picture is played back on the 
full screen, and the operation icon is 
automatically displayed on the screen.
≥ Next (previous) page can be displayed by 
touching / .
HDCSD10_TM10_TM15P-VQT2H52_eng.book  77 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							78VQT2H52
4Select the playback operation by 
touching the operation icon.
1/; : Slide show (playback of the still pictures 
in numerical order) start/pause.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫ : Stops the playback and shows the 
thumbnails.
≥ Touch   to display/not-display the 
operation icon.
∫ Change the thumbnail display
During step 3, the thumbnail display changes in 
the following order if the zoom lever is operated 
to 
_ side or ` side.
20 still pictures () 9 still pictures 
() 1 still picture
≥ 9 still pictures display returns if the power is 
turned off or the mode is changed.
≥ It is possible to operate with the adjust zoom 
button.
≥ Switch to 1 still picture display to check the 
recording date and file number.
∫ Changing the playback settings 
for the slide show
1) Touch .
2) Touch the interval of playback for the slide 
show.
[SHORT]:
Approx. 1 sec
[NORMAL]:
Approx. 5 sec
[LONG]:
Approx. 15 sec
3) Touch the desired sound.
≥ During slide show or audio testing, speaker 
volume can be adjusted by the volume lever. 
(l 71)
(To test the music audio)
Touch [START] and start the audio testing.
≥ Touch the other music option to change the 
music to be tested.
≥ When you touch [STOP], the music playback 
stops.
4) Touch [ENTER].
F
FF
HDCSD10_TM10_TM15P-VQT2H52_eng.book  78 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							79VQT2H52
≥Any still pictures where the thumbnails are 
displayed as   cannot be played back. Still pictures recorded on the same day can be 
played back in succession.
1Touch the date select icon.
A
Date select icon
2Touch the playback date.
The still pictures recorded on the date selected 
are displayed as thumbnails.
3Touch the still picture to be 
played back.
≥Playing back of all the still pictures returns if 
the power is turned off or the mode is changed.
≥ Even if still pictures are recorded on the same 
day, they are grouped separately in the 
following cases.
jWhen the number of still pictures exceeds 
999
j When pictures are recorded in Hi-speed 
Burst Shooting mode (  is indicated after 
the date in the list by date).
≥  is displayed after the date in the list by date 
for the still pictures created from the motion 
picture. ( l73)
Still picture compatibility
≥This unit is compliant with the unified 
standard DCF (Design rule for Camera File 
system) established by JEITA (Japan 
Electronics and Information Technology 
Industries Association).
≥ The file format of still pictures supported by 
this unit is JPEG. (Not all JPEG formatted 
files will be played back.)
≥ This unit may degrade or not play back still 
pictures recorded or created on other 
products and other products may degrade 
or not play back still pictures recorded on 
this unit.Playing back still pictures 
by date
HDCSD10_TM10_TM15P-VQT2H52_eng.book  79 ページ  ２００９年７月６日　月曜日　午後１時４６分 
						

							80VQT2H52
Playback
Editing
1
Deleting scenes/still pictures
¬Change the mode to  .
∫ Deleting multiple scenes/still pict ures from the thumbnail display
1Press the   button while the 
thumbnail view screen is 
displayed.
2Touch [SELECT] or [ALL 
SCENES].
≥When [ALL SCENES] is selected, all the 
scenes or still pictures on the selected media 
will be deleted. When the confirmation 
message appears, touch [YES].
(In case of playing back scenes or still pictures 
by date, all the scenes or still pictures on the 
selected date will be deleted.)
≥ Protected scenes/still pictures cannot be 
deleted.
3(Only when [SELECT] is selected in step 2)
Touch the scene/still picture to 
be deleted.
≥When touched, the scene/still picture is 
selected and the   indication appears on the 
thumbnail. Touch the scene/still picture again 
to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
4(Only when [SELECT] is selected in step 2)
Touch [Delete] or press the   
button.
≥When the confirmation message appears, 
touch [YES].
Deleted scenes/still pictures cannot be restored, 
so perform appropriate confirmation of the 
contents before proceeding with deletion.
0h00m00s 0h00m00s
F
To delete by confirming 
images being played back
Press the   button while scenes or 
still pictures to be deleted are being 
played back.
≥ When the confirmation message 
appears, touch [YES].
HDCSD10_TM10_TM15P-VQT2H52_eng.book  80 ページ  ２００９年７月６日　月曜日　午後１時４６分