Panasonic Hd Visual Communication Unit Kx Vc500 Operating Manual

Video Conference Call Screen
Other party’s information
When registered in the contact list: The other party’
s name/group name is displayed.
When not registered in the contact list: The other party’
s IP address is displayed.Video Image
Displays the other party’
s video, your own video, or video from the secondary video input such as a
computer display or a sub video camera. (

Page 37, Page 39)Subscreen
Depending on the screen layout, your own video or the other party
’s video is displayed here. (

Page...

Making a Video Conference Call
You can make a video conference call using one of the following methods. Note
•During a video conference call, you cannot perform the following operations:
–Pressing [Menu] to display the Menu screen.
– Pressing [Contact] to display the Contact List screen.
• Make sure that peripheral devices (e.g., display, main video camera) are turned on.
• If a 
called party does not answer a video conference call within approximately 60 seconds, the call will
be terminated...

Calling from the Home Screen (Operation with the Remote Control)
1Press [Home].
•The Home screen is displayed. 2
With the dial keys, enter a One-Touch Connection number
(1 to 5).
•The information registered in the selected One-Touch
Connection number is displayed. 3
Press [Start] to start the call.
•You can also start the call pressing  [Enter].
4 When you want to end the call, press  [End].
• The Home screen is displayed. Document Version  2010-03  
Operating Manual 23 Starting a Video Conference3
2
1
4   

Calling from the Menu Screen (Operation with the Remote Control)
Note
•From the Menu screen, you can make a video conference call using up to 99 speed dial numbers ( 1
to 99). (From the Home screen, you can make a video conference call using up to 5 One-Touch
Connection numbers ( 1 to 5).)
1 Press [Menu].
•The Menu screen is displayed. 2
Select "Speed Dial" using [ ][ ], then press [Enter].
• The Speed Dial screen is displayed. Note
•If you press [B], the Contact List modification
screen will be...

Calling from the Contact List (2-party Conference/3-party
Conference)
1Press [Menu].
•The Menu screen is displayed. 2
Select "Contact List" using [ ][ ], then press
[Enter].
• The  Contact 
List screen is displayed. The entries are
grouped in the index tabs and displayed in
alphabetical order of  "Site/Group". Note
•You can also open the Contact List screen
pressing  [Contact] from the Home screen.
3 Select the entry you want to call using   [ ][ ].
• You can switch the index tab back and...

Calling by Entering an IP Address
You can make a video conference call by entering the IP address of the party you want to call. Only 2-party
video conference calls can be made using this method.1 Press [Menu].
•The Menu screen is displayed. 2
Select "Manual Dial" using [ ][ ], then press
[Enter].
• The Input screen is displayed. 3
Enter the IP address.
•If the 
IP address contains 1 or 2 digit numbers, enter
these numbers as they are. Do not enter like [.001].
Example: The IP address is...

Calling from the Call History
You  can 
make a video conference call from the Call History. Only 2-party video conference calls can be made
using this method.
The last 30 video conference calls made and received are stored in the Call History, in order of newest to oldest
call. When making or receiving a 3-party video conference call, the call information of the other two parties is
stored separately. Therefore, it is not possible to identify whether the stored call was a 3-party video conference
call or...

Answering a Video Conference Call
Depending on the system settings, you can either respond to a request to participate in a video conference
call manually (manual answer) or automatically (automatic answer). For details, consult the dealer. Note
•Make sure that peripheral devices (e.g., display, main video camera) are turned on.
When Manual Answer is Set When a video conference call is incoming there will be an incoming call ring, and a dialog box is displayed. Operation with the Main Unit
1 Press...

When Automatic Answer is Set
When a video conference call is incoming the call will be automatically answered after one ring, and
transmission then begins. Document Version  2010-03  
Operating Manual 29 Starting a Video Conference 

Changing the Screen Layout during a 2-party Video
Conference Call
You can choose from 3 different screen layouts when taking part in a 2-party video conference call.1 Press [Layout].
•The screen will cycle through the available layouts
each time you press  [Layout].
– Layout 1: The other party’s image is displayed
full screen.
– Layout 2: The other party’s image is displayed
full screen, and your own image is displayed in
the upper right subscreen.
– Layout 3: Your own image is displayed full
screen....