Panasonic Hd Projection Television Pt 47wxd64 Operating Instructions

							REMOTE CONTROL OPERATION
19 z
ENGLISH
Component Codes (cont.)
Codes For VCR   
BrandCode
Admiral335
Aiwa332
Akai314, 315, 316, 329
Audio 
Dynamic311, 339
Bell & Howell305, 313
Broksonic320, 326
Canon323, 325
CCE343
Citizen306
Craig305, 306, 329
Curtis 
Mathes324, 345
Daewoo 301, 324, 343
DBX310, 311, 339
Dimensia345
Emerson303, 319, 320, 325, 
326, 343
Fisher305, 307, 308, 309, 
313
Funai320, 326, 334
GE324, 333, 345
Goldstar306
Gradiente334
Hitachi300, 323, 345
Instant 
Replay323, 324
Jensen339
JVC310, 311, 334, 339
Kenwood306, 310, 311, 339
LXI300, 305, 306, 307, 
308, 309
Magnavox323, 324, 331
Marantz310, 311, 339
Marta306
Memorex309, 324
MGA338, 340, 341, 347, 
348
Minolta300, 345
Mitsubishi338, 340, 341, 347, 
348
Multitech304, 347
NEC310, 311, 334, 339
Olympic323, 324
Optimus306, 321, 328, 335
Orion320, 326
Panasonic321, 322, 323, 324
Penney300, 305, 310, 311, 
324, 339, 345 
Pentax300, 311, 345
Codes For VCR (Contd.)
BrandCode
Philco320, 323, 324, 326, 
331, 343
Philips323, 324, 331
Pioneer323
Proscan300, 301, 302, 323, 
324, 331, 333, 345, 
346
Quasar321, 322, 323, 324
Radio Shack305, 309, 324, 333, 
336, 340
RCA300, 301, 302, 323, 
324, 331, 333, 345, 
346
Realistic305, 309, 324, 336, 
340
Samsung302, 304, 333
Sansui320, 326, 339, 352
Sanyo305, 309, 313
Scott301, 302, 304, 309, 
320, 326, 338, 340, 
347, 348
Sears300, 305, 306, 307, 
308
Sharp335, 336
Shintom317
Signature 
2000335
Singer337
Sony328, 329, 330
Sylvania323, 324, 331
Ta s h i r o306
Tatung310, 311, 339
Teac310, 311, 339
Technics321, 322, 323, 324
Te k n i k a324
To s h i b a301, 346
Ve c t o r  
Research311
Wards306, 309, 335, 336, 
344
Yamaha305, 310, 311, 339
Zenith306,344
  
Codes For Cable Box
BrandCode
ABC124
Archer125, 132
Cableview105, 132
Citizen105, 122
Curtis112, 113
Diamond124, 125, 
132
Eagle129
Eastern134
GCbrand105, 132
Gemini122
General
Instrument/
Jerrold111, 119, 
120, 121, 
122, 124, 
125, 126, 
127
Hamlin
112, 118, 
140, 141, 
142, 145
Hitachi103, 124
Macom103, 104, 
105
Magnavox133
Memorex130
Movietime105, 132
Oak102, 137, 
139
Panasonic109, 110, 114
Philips
106, 107, 
128, 129, 
130
Pioneer101, 116
Pulsar105, 132
Puser132
RCA11 5
Realistic132
Regal
112, 118, 
140, 141, 
142, 145, 
149
Regency134
Rembrandt105, 132, 
137
Samsung105
Scientific Atlanta111, 112, 113
Slmark101, 105
Sprucer105, 110
Stargate105, 110
Te l e v i e w101, 105
Texscan144
To c o m135
To s h i b a104
Unika125, 232
Codes For Cable Box (Contd.)
BrandCode
Universal122, 132
Videoway106
Viewstar129, 130
Zenith100, 117
Zenith/.Drake 
Satellite100
Codes For DBS  
BrandCode
Dish Network 
(Echostar)105, 115, 116
Echostar105
Express VU105, 115
G.  E .106
G.I. (General 
Instrument)108
Gradiente11 4
Hitachi103, 111, 
11 2
HNS (Hughes)103
Magnavox101, 102
Panasonic104
Philips101, 102
Primestar108
Proscan106, 109, 110, 
11 3
RCA106, 109, 
110, 113
Sony107
Star Choice103, 108
To s h i b a100
Uniden101, 102
Codes For DVD
BrandCode
Denon100
Ferguson101
JVC109
Mitsubishi105
Nordmende101
Panasonic100
Philips103
Pioneer102
RCA101
Saba101
Samsung11 0
Sharp108
Sony104
Te c h n i c s100
Thomson101
To s h i b a103
Yamaha100
Zenith107 
						

							20 z
REMOTE CONTROL OPERATION
ENGLISH
Component Codes (Cont.)
Codes For Cassette Decks   
BrandCode
Aiwa223, 224, 225
Denon231
Fisher203
Jensen214
JVC229, 230
Kenwood200, 207
Marantz202
Nakamichi205
Onkyo208, 209, 213
Panasonic216, 218
Philips222
Pioneer204
RCA226, 227, 228
Sansui205, 210
Sharp231
Sony219, 220
Te a c210, 211, 215
Technics216, 218
Ya m a h a201, 202
Codes For Receivers 
BrandCode
Admiral120
Aiwa125, 126
Denon134, 135, 136
Fisher104
Garrard11 3
Harman 
Kardon11 5 ,  1 2 3
Jensen129
Codes For Receivers 
(cont.) 
BrandCode
JVC132, 133
Kenwood100, 108
Magnavox127
Marantz124
Mclntosh11 6
Nakamichi106
Onkyo109, 114
Optimus 103, 127, 130, 
131
Panasonic118, 119, 121
Philips123
Pioneer105, 107
Quasar118, 119, 121
RCA103, 105, 127, 
130, 131
Sansui103, 111, 139
Sharp134, 137
Sony122
Soundesign138
Te a c111 ,  11 2 ,  11 3
Technics118, 119, 121
Victor132, 133
Ya m a h a101, 102
  
Codes For CD Player  
BrandCode
Admiral226
Aiwa233, 235
Carver229
Denon242
Emerson239
Fisher205
Harman/Kardon219, 220, 
221, 223
Hitachi207
Jensen234
JVC240, 241, 245
Kardon223
Kenwood200, 201, 211, 
245
LXI/Sears236
Magnavox229, 232
Marantz229
McIntosh221
Nakamichi210
Onkyo214, 215
Optimus208, 218, 
220, 222
Panasonic224, 225, 227
Philips229, 230
Pioneer208
Quasar224, 225, 227
RCA231, 237, 
238, 247
Sansui210, 246
Sanyo205
Scott210, 246
Sharp242, 243
Sherwood220
Sony228
Soundesign244
Te a c212, 216, 218
Technics224, 225, 227
Victor240, 241, 245
Ya m a h a202, 203, 204
Codes For Personal Video 
Recorders
BrandCode
Panasonic Replay 
TV100
Philips Tivo102
Sony Tivo101 
						

							BASIC MENU NAVIGATION
21 z
ENGLISH
Basic Menu Navigation
MENU



  




  




  




  




  

P i c t u r eP i c M o d eS t a n d a r dC o l o r-3T i n t+1B r i g h t n e s sP i c t u r e0S h a r p n e s s+1N o r m a lO t h e r   A d j .+1
+1



  




  




  

MENUMENU
 EXIT
Press
Press
Pressto select Other 
Adj.to display the
Main Menu.
to select 
the desired 
icon.
sub Menu
Field
Press
Press
NORMAL PICTURE
Pressto enter the sub-
menu field.
Press to select desired 
sub-menu 
feature.
Note: For sub -menu with OTHER ADJ. Press to select desired
sub-menu.
Note: To EXIT menus.   
repeatedly until normal
Pressto access Other 
Adj. sub-menu. Press
to adjust or
set desired
sub-menu
feature.
Press
sub sub- Menu
Field
to adjust or
select desired
sub-menu.
orpicture is displayed. 
to return to normal
picture. 
						

							22 z
MENU OPERATIONS
ENGLISH
Menu Operations
PICTURE
Note:While sub-menu features are  highlighted, press WVOL
or VOLX to adjust or activate. 
ˆPIC MODE - Lets you choose one of three pre-set
Picture Modes that best suits the program you are
viewing. Selecting this feature will also affect Color
Temperature setting.
PIC MODE-COLOR TEMP DEFAULT SETTINGS
Note:Each mode has its own picture settings (Color, Tint, Brightness,
Picture and Sharpness) and Color Temp. settings.
• VIVID - This is the default mode, It provides
enhanced picture contrast and sharpness for
viewing in a well-lit room.
• STANDARD - Recommended for normal viewing
conditions with subdued room lighting.
• CINEMA - Select this mode for watching movies in
a darkened room. It provides a soft, film-like
picture.
ˆCOLOR - Adjusts desired color intensity.
ˆTINT - Adjusts natural flesh tones.
ˆBRIGHTNESS - Adjusts dark areas of picture.
ˆPICTURE - Adjusts white areas of picture.
ˆSHARPNESS - Adjusts clarity of outline detail.
ˆNORMAL - Reset each PIC Mode adjustments to
factory default settings.   
ˆOther Adjust
Highlight OTHER ADJ. and press OK button to display the
sub sub-menu.
Note:While sub sub-menu features are highlighted, press
WVOL or VOLX to select or activate.  
• COLOR TEMP (temperature) - To increase or decrease
WARM (red) and COOL (blue) colors to suit personal
preferences.  
• NATURAL COLOR - To increase the color reproduction
range with natural color gradation and highly delicate
hues.
• VIDEO NR - Reduces noise in the channel, commonly
called snow. • 3D Y/C FILTER - Minimizes noise and cross color in the
picture.
• COLOR MATRIX - Available only with 480p signal.
Select HD or SD to automatically adjust color
parameters for HD (high definition) and SD (standard
definition). This feature is not selectable when viewing
regular TV (NTSC) program. 
Note:When viewing a non-standard DTV signal
format, you can change color parameters
manually for the best picture quality.
• VM (VELOCITY MODULATION)-To increase picture
sharpness and provides crisp white to black transitions 
• FREEZE - This feature is used to freeze main picture
and display it in a PIP or SPLIT frame, when the
FREEZE button on the remote control is pressed. Press
FREEZE again to delete frame. 
Note:SWAP, SIZE, SEARCH, PIP MIN and PIP MAX buttons are not
functional in this mode.   
AUDIO
Note:While sub-menu features are highlighted, press WVOL
or VOLX to adjust or activate. 
ˆBASS - Increase or decrease the bass response.
ˆTREBLE - Increase or decrease the treble response.
ˆBALANCE - Emphasize the left/right speaker volume.
ˆNORMAL - Reset BASS, TREBLE and BALANCE
adjustments to factory default settings.  
ˆOther Adjust
Note:While sub sub-menu features are highlighted, press VOL
X to adjust or activate. 
• AI SOUND - Equalize overall volume levels across all
channels. (AI sound is not available in VIDEO mode). 
• BBE
® - BBE High Definition Sound restores clarity
and presence for better speech intelligibility and
musical realism.
PIC MODECOLOR TEMP
VIVIDCOOL
STANDARDNORMAL
CINEMAWARM
Picture
Color31Tint31
Pic ModeStandard
Picture53Brightness31
Sharpness31NormalSetOther Adjust
Other Adjust
Natural ColorOnVideo NROff
Color TempCool
Color MatrixSD3D Y/COff
VMOffFreezeSplit
Audio
Treble8
Balance31
NormalNo
Bass7
Other Adjust
OK
Other Adjust
AI SoundOff
BBEOff
SurroundOff
SpeakersOn
HDMI InAuto 
						

							MENU OPERATIONS
23 z
ENGLISH
AUDIO (cont.)
ˆOther Adjust (cont.)
• SURROUND - Enhances audio response when listening
to stereo.
• SPEAKERS - This feature is used to turn TV speakers
ON or OFF.
• On - TV speakers operate normally.
• Off - TV speakers off. 
• HDMI In - When using HDMI, this feature will let you
switch between Analog Input and Digital Input.
• Auto - Automatically selects Analog / Digital signal.
• Digital - Selects Digital Input only.
• Analog - Selects Analog Input only.
CHANNEL
Favorite - Allows you to create Favorite channel list from
Antenna (A) or Antenna (B).
ˆSurf Mode - Select FAVORITE or ALL CHANNELS
with remote control 
WVOL or VOLX, then press the OK
button
.
ˆRF Input - Select Antenna (A) or Antenna (B). 
ˆChannel - Use the remote control 
WVOL or VOLX to
select desired channels, then press the OK button to
add. To delete channel, press OK again while channel
number is displayed.  
Captions - To enter preset and manual labels to desired
stations. Also to enter input label to video inputs. 
ˆPreset Labels - To enter channel numbers for popular
TV stations.
Procedure
• Press OK button while Preset Labels is selected to
select RF Input, then press WVOL or VOLX to
select Antenna (A) or Antenna (B). 
Note:Only input with signal will be selectable. 
•Press OK button to underline your selection.
• Press CH T to select desired preset caption.
• Then use the remote numeric keypad to select
desired channel (refer to your local TV guide).
• Press OK to enter the selection.   Note:To delete a channel number, while highlighted
press WVOL repeatedly until all numbers are
removed, then press OK button.
ˆManual Labels - To enter numbers and captions
manually.
Procedure
• Press OK button while Manual Labels is selected to
select RF Input, then press WVOL or VOLX to
select Antenna (A) or Antenna (B).
Note:Only input with signal will be selectable. 
•Press OK button to underline your selection.
• Press CH T to select Channel, then press WVOL
or VOLX to select available channel number.
• Press CH T to select CAPTION.
• Press VOLX to select first character position, then
press CHS or CHT to select character (refer to
your local TV guide for labeling channels).
• Repeat until all characters are added, up to (7)
characters can be added for each channel. 
•Press OK button to underline your selection.
Note:To delete the Channel Caption, highlight the first
character and press CHS or CHT until no character is
displayed. Move to the next character and repeat the
process. After all characters have been deleted, press
OK to enter the choice.  
ˆInput Labels - To label video input connections for
onscreen display. 
Procedure
• Press OK button while Input Labels is selected to
select COMPONENT 1, then press WVOL or
VOLXto select preset INPUT LABEL for
component 1. 
• Press OK to underline your selection. 
• Press CHTto select another input, then repeat
procedure for adding more labels to inputs.
Notes:
• To delete Input labels, select desired input, then
press WVOL or VOLX until no label is
displayed.
•Press OK button to enter your selection.     
Favorite
Surf ModeFavoritesWX_______
RF InputAntenna (A)
Channel
A 1
The maximum is 16 favorite channels
Captions
Preset Labels
Manual Labels
Input Labels
NBCPBS
CNN
RF InputWAntenna A)XABC
CBSFOX
ESPNHBO
12-1
15-1
Captions
Preset LabelsManual LabelsInput LabelsRF input
Channel
Caption
W Antenna (A) X
15-1
CHANGE
Captions
Preset Labels
Manual Labels
Input Labels
Component 1
Component 2
HDMI
Video1
Video2
Video3
Video4WDBSX
SKIP
DVD
VCR 
						

							24 z
MENU OPERATIONS
ENGLISH
Photo Viewer™ Operation
Photo Viewer™ lets you display JPEG images recorded by digital
camera on SD card or other types of memory card when it is
inserted in the proper card slot.   
Notes:
• Photo Viewer™ can only show still images recorded by
Digital Still Camera with DCF and EXIF standard JPEG
file.
• Other types of Memory cards can be inserted into the
PCMCIA card slot by using the appropriate Card
adaptor.
• Memory cards are not supplied with this television.
Compatible memory cards that can be viewed with
Photo Viewer™
Inserting and Removing SD or PCMCIA card
WARNING: As with any small object, SD cards can be
swallowed by young children. Do not allow
children to handle the SD card. Please remove
the SD card immediately after use.
Procedure
ˆSD card - Push in the SD card into the SD card slot until it is
clicked in. Press again on the card to remove it.
ˆPCMCIA card - Push in the card firmly until it is seated. To
release the card, press the release button on the right side of
the card slot. Before inserting or removing the PCMCIA card,
make sure that the TV is turned Off. Otherwise, it may
damage the unit. Do not insert anything other than the
PCMCIA card.
Information Regarding memory cards
• Memory cards must be formatted with FAT12 or FAT16 in
order to be viewed on TV. If the card is not formatted, it may
cause incompatibility with certain memory card adaptors. If
this happens, reformat the card using your digital camera.
Refer to your camera manual for more information.
Note:Reformatting the card will erase the images stored in
it. 
Basic Operation
Insert either the SD card or the PCMCIA card into the appropriate
slot. The video disappears from the screen while the Photo
Viewer™ access the information from the card. After accessing
the images from the card, a thumbnail screen is displayed on-
screen. Use the navigation keys to select the desired thumbnailand press OK button to display the image on-screen. UseW VOL
or VOL X to select the previous or next picture. Press EXIT
button to exit Photo Viewer™ mode.
Photo Viewer™ - Thumbnail mode
The thumbnail screen is the initial entry screen from the main
menu. It shows the total number of images on the card, Filename
(folder number and the number of the thumbnail that is
highlighted), the date the picture was taken and the pixel
(resolution) of the picture.
Procedure
• Press MENU button to display the Main menu.
• Highlight Photo Viewer™ Icon using the navigation (Left/
Right/Up/Down) keys.
• Press OK button to display the thumbnail screen. 
 
Note:It may take long time to display the thumbnail if there are lots of
files or if the file size is big.
• Select the desired thumbnail image by using the 
Left/Right/Up/Down navigation keys.
• Press OK button to start the Single Picture View mode.
• Change the picture by pressing W VOL or VOL X keys.
• Rotate the picture if necessary, by using the CH T or 
CH S keys.
Notes:
• Maximum number of folders that can be displayed: 100.
• Maximum file size: 3000. Any folder of files larger than
the specified size, will not be displayed.
• Picture resolution: Compatible in the range 64x64 -
8192 x 8192 (sub-sampling 4:2:2 or 4:2:0)
• If the image is imported from a PC, it must follow the
EXIF (Exchangeable image file format) 2.0, 2.1, 2.2 in
addition to the DCF (design rule for Camera File system)
format, or it will not be displayed.
• If the JPEG is modified using a PC, it will not be
displayed on TV.
• The Photo Viewer™ cannot display Motion JPEG and
still image not DCF formatted (i.e. TIFF, BMP).
• If the file is partially corrupted, it may be shown in lower
resolution.
• If both SD card and PCMCIA card is inserted at the
same time, SD card has the priority. Otherwise, the card
inserted later will have priority.
• Do not remove the SD card or PCMCIA card while Photo
Viewer™ is accessing the information (when the card
icon is flashing). Such action may damage the memory
card or the unit itself.
Card typeMaximum Size
SD, MMC (Multi Media Card), 
Smart Media*, Compact Flash*
Memory Stick*, xD-Picture Card*
Flash ATA*, Memory Stick Pro*
*These cards require standard 
PCMCIA adaptor. (Some PC card 
adaptor will not be compatible).
Note: Photo Viewer™ is not 
compatible with card type hard disk 
(Micro Drive, Mobile type hard 
disk, etc.SD - 512MB, MMC - 64MB
Smart Media - 128MB, 
Compact Flash - 1 GB
Memory Stick - 128MB
xD-Picture Card - 128MB
Flash ATA - 128 MB
Memory Stick Pro - 1GB
POWERW VOLUME XMENU OK T CHANNEL STV/VIDEO
S-VIDEO VIDEO 4 L - AUDIO - R
SD Card slotPCMCIA card slot 
						

							MENU OPERATIONS
25 z
ENGLISH
Photo Viewer™ Operations (Cont.)
Photo Viewer™ Setup Menu 
This menu allows you to customize features in the Photo
Viewer™ Setup menu. 
Procedure
• Highlight Photo Viewer™ icon and press OK button to
display the thumbnail screen.
• Press the SD button on the remote control to display the
Setup screen. 
•Use the CHTS, WVOL or VOL Xkeys to navigate in
the setup menu.   
ˆSlide Show - Allows you to start the slide show by pressing
the OK button while Start is highlighted. Press OK button to
stop the Slide Show.
Note:When you are in the Slide Show mode, you can change
the Aspect of the image on screen by pressing the
ASPECT button on the remote control.
ˆInterval - Allows you to change the length of time that a slide
is being displayed on screen. Available settings are: 5sec,
10sec, 15sec, 30sec, 60sec, 90sec and 10 minutes.  
ˆSequence - Select either Order or Random.
ˆRepeat - Select Off or On.
Note:After setting Interval, Sequence or Repeat, press CH S
button to select Start, then press OK to start the Slide
Show.
ˆRotate - Allows you to rotate the image.
ˆZoom - Lets you select the magnification of the Single Slide
display.
Procedure
• While in the Single Slide display mode, press SD button
to display Photo Viewer™ Setup Menu. Zoom option will
be displayed in the Setup Menu.
• Highlight Zoom and press OK button.
• Press WVOL or VOL X button to select To Fit, x2 or x4.
• Press OK button. To move the image in the picture
frame, press the navigation buttons.
• Press OK to view the slide in normal magnification.
ˆCard - Select either SD or PC when both cards are inserted in
the slots.Following are some of the error messages that may be displayed
on-screen when certain conditions are not met or exceeds the
Photo Viewer™ specifications.
Notes:
• If thumbnail screen or a single slide image is displayed
for longer than 10 minutes, Image shift (refer to page 26)
feature will be activated to prevent image retention. The
image on-screen will zoom-in and zoom-out in 4 (four)
steps.To exit this mode, press OK button or select
another slide or press any button. 
• During the Slide show, the Image shift feature will
activate if the image is displayed longer than 5 (five)
minutes. The image will be shifted horizontally (left or
right) in minute increments. Image shift feature will not
activate, if it is turned Off.
Setup MenuReturn
Interval5SecSequence Order
Slide Show Start
Repeat OFFRotate
LeftCard SD
100-001 0001/0066
S
T WX
EXIT SELECTCHANGEOK
: 07/04/2002
: 1600 x 2000 Date
Pixel
Error messages
Error conditionError messages displayed 
on-screen
When inserting CardNo card or Card is not inserted 
correctly
If the JPEG file is corrupted
and cannot be decoded.This type of image is not supported.
If the card is not formatted with
FAT 12 or FAT 16 or if it is not
DCF standard.This type of format is not supported.
If thumbnail and main picture 
cannot be shown 
Over 3000 image filesPhoto Viewer™ cannot support over 
3000 JPEG files.
Resolution overPhoto Viewer™ cannot support over 
8192 x 8192 pixels.
If incompatible card is insertedThis type of card is not supported.
Photo Viewer™ Troubleshooting
SymptomsSolutions
Cannot read the content of
the card
A )  N o t  c o m p a t i b l e  f o r m a t .  M u s t  b e           
formatted with FAT 12 or FAT 16.
B) The extension is not “JPG”. 
Photo Viewer™ can display EXIF 
standard JPEG file, and JPEG 
file which is not EXIF standard 
cannot be shown. 
C) The folders not under DCF 
standard.
PC card cannot be ejectedPush the card all the way in, and 
eject.
Poor picture quality
If the main image cannot be read 
(the file is partially corrupted), the 
Photo viewer™ will read the 
thumbnail. Please confirm the 
format of the image.
Long time to displayIt will take long time to display, if 
there are lots of images or if the file 
size is big.
This icon will appear where 
thumbnail image will. 
						

							26 z
MENU OPERATIONS
ENGLISH
Timer
This menu lets you set the sleep timer, Timer (On/Off), clock and
the day of the week.
ˆSleep - Select to turn the PTV off in 30, 60, or 90
minutes. Select No to turn the sleep timer off.
Procedure
• Press MENU button to display the Main Menu.
• Highlight the Timer icon using the navigation buttons.
• Press OK button to display the Timer menu.
•Press VOL X button to select 30, 60, 90 minutes or No.
Note:The on-screen display will flash 3, 2 and 1 to indicate the
last three (3) remaining minutes prior to turn off.
 
ˆTimer - Select timer to turn the PTV on and off at
selected times and on selected day. 
Procedure
• While in the Timer menu, press CH T button to highlight
Timer.
• Press OK button to display the Timer sub-menu.
• Press W VOL or VOL X button to select appropriate day
setting.
• Press CH T to highlight On Time.
• Press OK button to enter the time field. Press CH S or
CH T button to set the hour (AM or PM).
• Press VOL X and press CH S to set the minutes.
• After setting hour and minutes, press OK or MENU
button to quit the settings.
•Press CH T to highlight Off Time and repeat the same
procedure as for setting time.
• Press CH T to highlight Set and select Yes or No.
• Press EXIT button to exit the menus.
• Enter the desired channel number using the numeric
keypad and the PROG button (if necessary). Thetelevision will tune to this channel when timer is
activated.
• Turn Off the set. 
• The television will turn On at the selected time and the
channel will be the channel selected before turning the
TV off.
Notes:
• Clock must be set before you can set Timer. Use
navigation buttons to highlight the Timer Icon.
• The television automatically turns OFF after 90 minutes
when turned ON by the Timer. If the OFF time is selected
or if a key is pressed, the automatic OFF after 90
minutes will be cancelled. 
ˆClock Set - Select to set the Time of the day.
Procedure
• While in Timer menu, press CH T to highlight Clock Set
and press OK button.
• Press CH S or CH T button to set the hour (AM or PM).
• Press VOL X to enter the next field. Press CH S or 
CH T button to the minutes. Press MENU or OK to
return to the Timer screen.
ˆDay Set - Select to set the day of the week.
Procedure
• Press CH T to highlight Day Set and select the day of
the week using W VOL or VOL X button.
• Press EXIT button to quit the timer menu screen.
Timer
Sleep
Timer
Clock Set
Day Set
No
- - : - -- -
- - -
OKTimer
Timer
Clock Set10 : 10
AM
Day SetSun
Sleep30
Timer
DaySun
On Time10 : 10AM
Off Time12 : 10PM
SetYe s
OK
OKTimer
Sleep
Timer
Clock Set
Day Set
No
- - -
10 :00AM
Timer
Timer
SleepNo
Clock Set10 :00AM
Day SetSUN 
						

							MENU OPERATIONS
27 z
ENGLISH
Set Up
This menu lets you select antenna, program channels,
select analog and digital closed caption, Convergence,
Auto Power On, Image Shift and Zoom Adjust.
Procedure
• Press MENU to display the Main Menu.
• Press TCH, CHS, W VOL or VOLX to select the
Setup icon.
• Press OK button to display the options in the Setup
menu.
Program CH
This menu allows you set up the antenna, auto scan all available
analog and digital channels, manually add or delete channels and
display the signal strength of the digital channels.
ˆInput Setup - Lets you specify Antenna mode (Cable
only, Cable/Antenna or Antenna only).
Note:You can connect either a Cable antenna or a terrestrial
antenna to Ant A. However, if you have both Cable signal
and terrestrial antenna signal, the Cable signal must be
connected to the Ant A input on the back of the
projection television. Connect the antenna signal to the
Ant B input.
Procedure
• In Set Up menu, select Program Channel and press OK.
• Press OK to enter sub-menu. Press W VOL or VOL X to
select Cable Only, Cable/Antenna or Antenna Only.
• Press OK button to enter your selection. When the next
screen will be displayed, press OK button to start the
Auto scan. Auto scan must be done when you select the
input signal for the first time or whenever you change the
antenna configuration. 
Notes:
• If Cable Only, Antenna Only or Antenna/Cable is
selected and DCM (Digital Cable Module) is not in, the
Auto scan will perform Scan All. • If Cable Only is selected and CableCARD is in, Auto
scan will be skipped.
• If Cable/Antenna is selected and CableCARD is in,
Antenna (B) Analog & Digital Auto scan will be
performed.
ˆAuto Scan - To automatically Scan All available
channels, Antenna (A) Analog, Antenna (A) Analog &
Digital, Antenna (B) Analog and Antenna (B) Analog &
Digital. 
Procedure
• Highlight Auto Scan and press OK to enter the sub
menu.
• Use T CH and CH S to select and press OK to start the
auto scan. After Auto Scan is completed press MENU to
return to the previous screen.  
ˆManual Program - To add or delete channels from
either channels list (A/B) manually.  
ˆSignal Meter - Displays the signal strength of the ATSC
digital channel in either Antenna (A) or Antenna (B).
Note:Signal meter feature is not available for analog channels.
Procedure
• Highlight Signal Meter and press OK button to enter the
sub-menu.
• In the RF Input field, select either Antenna (A) or
Antenna (B).
• Select the channel number using W VOL or VOL X
buttons.
• Press OK button to display the Signal Strength.  
Note:The color of the signal bar usually indicates the strength
of the received signal.
• Green - Adequate signal for a good reception.
• Yellow - Poor signal strength.
• Red - Very poor signal strength.
Program Channel
Input Setup
Manual Program
Signal Meter
Auto Scan
OK
Cable onlyWW
Connect Cable to Antenna (A)
Change your Input Setup
and press OK
Program Channel
Input Setup
Manual Program
Signal Meter
Auto Scan
OK
Connect Cable to Antenna (A)WWCable only
Auto scan is needed
press OK to start Auto Scan
Program Channel
Input Setup
Manual Program
Signal Meter
Scan AllAntenna (A) AnalogAntenna (A) Analog & DigitalAntenna (B) AnalogAntenna (A) Analog & Digital
Press OK to channel scan
all available channels
Auto Scan
OK
Program Channel
Input Setup
Manual Program
Signal Meter Auto Scan
RF InputChannel AddAntenna (A)
Channel DeleteA: 12T S
WXEXIT
MENU
to return SELECT
OK
Program Channel
Input SetupAuto ScanManual Program
Signal Meter
RF InputAntenna (A)________RF Channel3-1WX
Signal Strength: 70%Peak: : 75% 
						

							28 z
MENU OPERATIONS
ENGLISH
Closed Caption
The HDTV Projection Television includes a built-in decoder
that is capable or providing a visual display of the audio
portion. The program viewed must provide Closed
Captioning (CC) for the television to display it. You can set
your preferences to both digital and analog Closed
Captioning.
CC Mode
Select Off, On or On Mute.
• Off - Use when Closed Captioning is not desired.
• On - To display Closed Captioning.
• On Mute - To display Closed Captioning when
audio is muted.
Analog
This option lets you choose the closed caption service you
desire.
Procedure
• In Closed Caption menu, highlight Analog and press OK
button to enter the sub-menu.
• Press W VOL or VOL X to select the desired setting:
CC1, CC2, CC3, CC4, T1, T2, T3 or T4.
• CC1 - For video related information that can be
displayed (up to 4 line of script on the screen, where it
does not disturb the relevant parts of the picture). Script
can be in any language.
• CC2 to CC4 - Other modes used for video related
information.
• T1 - Blanks out a large portion of the picture on the
television screen, and displays program guide or any
other information currently being transmitted.
• T2, T3 and T4 - Other modes that display information
and blank out a large portion of the picture of the
television screen.
• Press MENU button to return to the Closed Caption
menu.
Digital
The Digital Closed Captioning menu lets you configure the
way you choose to view the digital captioning. This menu
will let you choose the type of closed captioning service,
font type, font size, font style. The colors sub-menu lets you
set the color of the font (Foreground), color the text box
(Background) on which the closed caption is text is
displayed, the opacity of the font (Fore Opacity), the opacity
of the text box (Back Opacity), and the outline of the
dropshadow (if selected under style).Colors sub-menu
Procedure
• In digital closed captioning sub-menu, select Colors and
press OK button to display the colors sub-menu.
Note:When digital caption is used on ATSC, the monitor
output (Prog Out) will also output the CC information.
This means, if you tape the program, the CC information
will also be recorded on tape. To avoid this, either turn off
digital CC or turn on analog CC.
Other Adj.
The Other Adjust menu lets you set Auto Power On, adjust
Convergence, select Image Shift On or Off and Zoom
Adjust.
ˆAuto Power On - Select Set to power up the PTV at the
same time as the Cable box or other components or
select Off.
ˆImage Shift - This feature prevents the image retention
associated with viewing fixed image for extended
period of time. The image is shifted left or right in small
increments if a fixed image is left on for a long time.
Selecting On is recommended.
ˆConvergence - This feature is used to adjust the
convergence if needed.
ˆZoom Adjust - This feature lets you adjust the size of
the zoom picture and position it vertically.
Procedure
• In Set up menu, highlight Other Adj. and press OK
button to display the sub-menu.
• Use T CH or CH S to navigate. Press WVOL or
VOL X to select or press OK button to display the sub-
menu for Convergence and Zoom Adjust.
ˆConvergence
Note: Only use the remote control buttons while adjusting
convergence. The front control panel navigation and
OK buttons have no effect.  
SettingOn
CC CC
CC Mode CC ModeAnalog AnalogDigital Digital
ForegroundGreen
CC CC
Fore Opacity Fore OpacityTranslucentBackground BackgroundWhiteBack Opacity Back OpacityOpaqueOutline Outline
Sample CC Text Sample CC Text
Black
Colors Colors
Set Up
Auto Power OnOffOff
Image Shift OnOn
Convergence
Zoom Adjust
S
T WX
EXIT
MENU
to return SELECT
CHANGE
Set Up
Auto Power OnOffOff
Image Shift OnOn
Convergence
Zoom Adjust
S
T WX
EXIT
MENU
to return SELECT
CHANGE
OK