Panasonic Hd Projection Television Pt 47wxd64 Operating Instructions

							ATSC CERTIFIED *
DIGITAL TELEVISION
High Definition Projection Television
Operating Instructions
™
*The presence of the DTV certification mark indicates that this
  product will successfully receive digital television transmissions
  that conform to any and all of the video formats described in the
  ATSC Digital Television Standard.
Televisor de Proyección de Alta Definición
Instrucciones de Operación
TQB2AA0504 40203
PRINTED IN USA
IMPRESO EN EE.UU.
POWERW VOLUME X CHANNEL S
TTV/VIDEO
MENU OKS-VIDEO VIDEO 4 L - AUDIO - R
PT-47WXD64 
						

							ENGLISH
The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.The lightning flash with arrow head
within a triangle is intended to tell the
user that parts inside the product are
a risk of electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING:   TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.
  DO NOT PLACE ANY OBJECTS FILLED WITH 
LIQUIDS, SUCH AS VASES, ON THIS APPARATUS.
The Class II insulation symbol (square within a square) indicates that this product has been evaluated 
and tested to comply with Class II insulation requirements.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet. 
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING:  TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL. 
						

							IMPORTANT INFORMATION
1 z
ENGLISH
Important Information
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
BBE High Definition Sound restores clarity and presence for better speech
intelligibility and musical realism.
High Definition Sound WARNING:  AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO 
NOT ALLOW CHILDREN TO HANDLE THE SD CARD.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
U.S. Patents Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 6,381,747; and 6,516,132.
HDMI, the HDMI logo and High Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.
: SD Logo is a trademark.
FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS PTV RECEIVER NOT EXPRESSLY
APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE
HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO
OPERATE THIS EQUIPMENT.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2004 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law. 
is a trademark of Cable Television Laboratories, Inc. 
						

							2 z
IMPORTANT INFORMATION (CONT.)
ENGLISH
Important Information (cont.)
Information Regarding Convergence
In the projection television, the image is formed by
projecting 3 different color images (red, green and blue)
onto the projection screen. Convergence refers to the
alignment of red, green and blue images on the
projection screen. When these images are properly
aligned (converged), you see a sharp and vibrant color
image. Sometimes, the three images may require
alignment. This is due to the effect of earth’s magnetic field
on the projection tubes. Normally, adjustment is not
necessary after the initial alignment at the center of the
screen. It is possible to correct the color fringing on other
areas of the screen by using the buttons on the remote
control and by following the on-screen instructions in the
set-up menu. Please converge the images before using the
television for the first time. The following diagram shows
examples of a misaligned image and a properly aligned
image. Please refer to pages 28 and 29 for detailed
procedure on how to adjust convergence. 
Notes:
• Make sure that the set is on for at least 20 minutes
before adjusting convergence as described on pages 28
and 29. 
Important Information Regarding The Use Of 
Video Games, Computers, Or Other Fixed 
Image Displays.
FCC INFORMATION
This equipment has been tested and found to comply with
the limit for a Class B Digital Device in accordance with the
specifications in Part 15 of the FCC Rules. The limits are
designed to provide reasonable protection against radio
and television interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications, However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause interference to radio or
television reception (which you can determine by turning
the equipment off and on), try to correct the interference by
one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Misconverged image
Properly aligned image
WARNING: The marking or retained image on the
picture tube resulting from viewing fixed image is
not an operating defect and as such is not covered
by Warranty. 
The projection television is designed to display
constantly moving images on the screen. Continuous
viewing of stationary images such as letterbox pictures
on standard screen TVs (with top/bottom bars), non-
expanded standard (4:3) pictures on wide screen TVs
(with side bars shown on each side of an image), stock
market report bars (ticker running at the bottom of the
screen), video game patterns, fixed scoreboards,
bright station logos, on-line (Internet) or repetitive
computer style patterns should be limited.
The extended use of fixed image program material can
cause permanent picture tube damage, shown as a
“shadow image” viewable on normal programs. This
type of irreversible picture tube deterioration can be
limited by performing the following steps:
• Limit the display of fixed image program material to
no more than 15% of total viewing time per week.
• Turn the power off when not in use. 
						

							TABLE OF CONTENTS
3 z
ENGLISH
Table of Contents
Table of Contents
Important Information ..................................... 1
Information Regarding Convergence ..........................    2
Information Regarding The Use Of Video Games
Computers, Or Other Fixed Image Displays ............    2
Congratulations ............................................... 4
Customer Record........................................................    4
Care and Cleaning ......................................................    4
Specifications..............................................................    4
Feature Chart..............................................................    4
Installation ........................................................ 5
Television Location .....................................................    5
Component Connection Cables ...................................  5
AC Power Supply Cord ...............................................    5
Cable / Antenna Connection .......................................    5
Remote Control Battery Installation ............................    5
First Time Setup............................................... 6
Front and Rear View of the High Definition 
Projection Television .................................... 7
Optional Equipment Connections .................. 8
VCR Connection .........................................................    8
CableCARD Connection .............................................    6
Digital TV - Set-Top Box (DTV-STB) or DVD Players .   8
Front Control Panel......................................................   8
HDMI Input Connection ..............................................    9
Digital Audio Out connection ......................................  10
Program Out Connection ............................................  10
Amplifier Connection (Analog) ....................................  10
PIP Operation ................................................  11
PIP Operation  ............................................................  11
Split Operation  ...........................................................  11
PIP And Split Operational Buttons .............  11
TV/Video Button .........................................................   11
Search Button.............................................................   11
Move Button ...............................................................   12
PIP MIN and PIP MAX Buttons ..................................   12
Freeze Button .............................................................   12
Main Picture Freeze Feature ......................................   12
PIP, Split and Freeze Mode Buttons 
Operational Chart ....................................................   12
Special Features of the High Definition 
Projection Television  ................................  13
Special Remote Buttons ..............................  14
Remote Control Operation ..........................  15
Operating Components with Remote Control.............  16
Programming the Remote ..........................................  18
Programming Without a Code ....................................  18
Component Codes .....................................................  18
Basic Menu Navigation.................................  21
Menu Operations...........................................  22
Picture ........................................................................  22
Audio ..........................................................................  22
Channel ......................................................................  23
Photo Viewer™ Operation..........................................  24
Timer ..........................................................................  26
Set Up ........................................................................  27
Lock ............................................................................  30
Glossary and Acronyms...............................  33
Troubleshooting Chart .................................  34
Index...............................................................  36
Note:The warranty and service center information is located in the back of this manual. 
						

							4 z
CONGRATULATIONS
ENGLISH
Congratulations
Your new High Definition Projection Television (PTV)
features state-of-the-art technology for high quality picture
and sound with complete audio/video connections for your
home theater system. Your PTV is designed to give you
many years of enjoyment. It was thoroughly tested and
tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at: www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Projection Screen (Turn PTV Off)
The projection screen is a high precision lens system which
has a protective screen. The protective screen is fully
washable with the following precautions:
• Use a mild soap solution or window cleaner and a clean
cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Do not use laundry detergent or automatic dishwasher
soap.
• Do not use alcohol, ammonia, or petroleum based
products. 
• Avoid excessive moisture and wipe dry.
• Prevent solution from running into the receiver below.
• Avoid bumping or scraping the screen.
Warning: Do not spray any type of cleaning fluid directly on the
screen.
Cabinet and Remote Control
• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
• Do not use benzene, thinner or other petroleum based
products. 
Specifications
Specifications are subject to change without notice or
obligation.
Feature Chart 
*Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbols are trademarks of Dolby Laboratories.
Power Source
PT-47WXD64 (4.1A)
120V AC, 60Hz
Channel Capability ATSC/NTSCVHF/UHF- 2-69
CATV - 1-135
HDMI Input jackType ADigital Audio Out jackPCM / Dolby* Digital Fiber OpticComponent Inputs (Y / PB / PR)75 Ohm, Phono Jack Type
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack TypeAudio Input Jacks500mV RMS 47K Ohm Video out jack1Vp-p, 75 Ohm, Phono Jack Type Audio Output Jacks500mV RMS 4.7K Ohm S-Video Input JacksS-Video (Y-C) Connector
MODEL
PT-47WXD64
FEATURES
ATSC DIGITAL TUNER•  
PHOTO VIEWER™•  
CableCARD™ INTERFACE •  
2 TUNER PIP/SPLIT•  
2 RF•  
ZOOM ADJUST  (SIZE AND POSITION)•  
PROTECTIVE SCREEN•  
CLOSED CAPTIONING•  
V-CHIP CAPABILITY •  
DIGITAL SCAN RATE 1080i, 
540p
NTSC LINE-DOUBLER  540p
VIDEO NORM•  
AUDIO NORM•  
STEREO•  
AI SOUND•  
BASS/BALANCE/TREBLE•  
SURROUND•  
BBE•  
HDMI/HDCP INPUT•  
A/V IN (REAR/FRONT)4
 (3/1)
DIGITAL AUDIO OUT•  
S-VHS INPUTS •  
COMPONENT INPUTS•   
						

							INSTALLATION
5 z
ENGLISH
Installation
Television Location
This unit can be used as part of an entertainment center.
Consult your dealer for available options.
• Avoid excessive sunlight or bright lights, including
reflections.
• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
• Fluorescent lighting may reduce remote control
transmitting range.
• Keep away from magnetic equipment, including motors,
fans and external speakers.
Component Connection Cables
Shielded audio and video cables should be used between
components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output connectors, that match
your component connectors.
• Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception of analog or digital cable channels, a
cable service connection is required.
Cable Connection
Connect the cable supplied by your local
cable company to ANTENNA (A)
connection on back of television. Select
Cable mode and ANTENNA (A) in SET UP
menu under Program CH (Program
Channels).
Antenna Connection
• For proper reception of digital and analog VHF/
UHF channels, an external antenna is required. For
best reception an outdoor antenna is
recommended.
• Connect home antenna to 
either  ANT (A) or ANT (B) 
connection on back of the 
television. Select Antenna
mode for ANTENNA (A) or 
(B) in Input Setup under 
Program CH in Setup menu. 
  
Note:Cable Mode is preset at the factory. Antenna users must
change to ANTENNA Mode for ANTENNA (A) in the Set
Up menu. If you have both Cable and Antenna, the
Cable must be connected to ANT (A).
Remote Control Battery Installation
Use two AA batteries (supplied):
1. Remove battery cover by pushing in on the catch while
lifting the cover up. 
2. Install batteries by matching (+) and (-) polarity signs in
the compartment. 
3. Re-insert the cover and press down the cover until it
snaps shut.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control.
Precautions
• Replace batteries in pairs. 
• Do not mix battery types (example: zinc carbon with
alkaline). 
• Do not recharge, heat, short circuit, disassemble, or burn
batteries.
• Battery replacement is necessary when the remote
control acts sporadically or stops operating the selected
device.
Polarized plug
75 Ohm ANT A
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
+-
+-
+
+-
+-
123 
						

							6 z
FIRST TIME SETUP
ENGLISH
First Time Setup
For your convenience, First Time Set up menu will be
displayed on screen when the set is turned on for the first
time. If needed, follow the menus and procedures
displayed on-screen for setting up the features.
Input Setup
To select the configuration of RF input depending on the
signal source.
Note:No video will be displayed in this setup mode.
Procedure
• Press VOL X to select Cable only, Cable/Antenna or
Antenna only.
• Press the OK button to underline your selection.      
• When the next screen is displayed, press OK button to
start the Auto Scan. All available channels with a signal
will be programmed into memory. 
Auto Scan
This feature allows you to selectively auto scan channels.
You can Scan All, Analog only channels or Analog & Digital
channels. 
Procedure
• Press OK button to start Auto Scan. 
• After Auto Scan is completed the PTV tunes to the first
channel found during auto scan.
Notes:
• If the EXIT button is pressed at anytime during auto
scan, the First Time Setup menu will be cancelled and
the PTV will tune to analog channel 2 on ANTENNA (A).  
• If a CableCARD is present during the First Time Setup
and Antenna (A) is set to cable, Antenna (A) will not be
scanned due to the CableCARD providing the channel
map.
Convergence
This menu lets you set the green CRT alignment and the center
convergence. Follow the instructions on-screen to perform
convergence. After convergence is performed, press EXIT to
return to normal viewing.  
First time setupInput Setup
Manual ProgramSignal Meter
Auto Scan
OK
Cable onlyWW
Connect Cable to Antenna (A)
Change your Input Setup
and press OK
S
T WX
EXIT
MENU
to return SELECT
First time setup
ConvergenceAuto Scan
Input SetupScan AllAntenna (A) AnalogAntenna (A) Analog & DigitalAntenna (B) AnalogAntenna (B) Analog & Digital
First time setup
Convergence
Auto Scan
Input Setup
S
T WX
EXIT
MENU
to return SELECT
OK
Press OK to go to 
Convergence setup 
						

							FRONT AND REAR VIEW OF THE HIGH DEFINITION PROJECTION TELEVISION
7 z
ENGLISH
Front and Rear View of the High Definition Projection Television
Front Panel   Rear Panel Jacks
FeatureDescription
 POWER
Toggles power OFF/ON
Note: In case of front panel lock-up or 
remote control hang-up, press and hold 
POWER button for more than 5 seconds 
until the unit resets itself.
 TCH and CHSTunes to lower or higher channels, 
navigate up/down in menus.
 WVOL and VOLXDecrease or increase volume, navigate 
left/right in menu, adjust selected feature 
in menu.
 TV/VIDEOChanges Input source
 OKCompletes channel specification, press to 
accepts menu and sub-menu selection.
 MENUDisplay or remove menu or return one 
step backward in menus.
 Photo Viewer™
Lets you display JPEG images recorded 
on memory cards by a digital camera. 
The Photo Viewer™ is located behind the 
door marked SD.
 Input 4Analog inputs for external devices
 Eject buttonPush this button to eject PC card.
POWERW VOLUME 
X CHANNEL 
S
TTV/VIDEO
MENU OKS-VIDEO VIDEO 4 L - AUDIO - R
POWERW VOLUME X
CHANNEL S
TTV/VIDEO
OK MENUS-VIDEO VIDEO 4 L - AUDIO - R
SD SlotPC Slot
ON/OFF 
Indicator LEDFront Panel 
controls
96531
8724
1
2
3
4
5
6
7
8
9
Item #Description
Antenna Inputs
ANT A - Connect Cable Antenna or Terrestrial Antenna to 
this input to receive Digital channels.
ANT B - If you have both Cable antenna and Terrestrial 
antenna, connect the Terrestrial antenna to ANT B.
CableCARD™ INTERFACE
Insert the CableCARD module from the Cable company to 
receive premium digital service.
SERVICE ONLY
Card slot used by a certified service technician only. Do not 
insert any memory card into this slot.
DIGITAL AUDIO OUT
5.1 Dolby Digital surround sound optical output.
HDMI (High Definition Multimedia Interface)
Input that accepts uncompressed digital signal and multi 
channel digital audio signal.
AUDIO IN
Use these audio inputs when DVI devices are connected to 
HDMI input using the DVI to HDMI adaptor.
COMPONENT VIDEO (Y-PB-PR) INPUTS
Use these jacks for connecting devices such as a DVD 
player or Set Top Box.
INPUTS 1, 2 and 3
Composite inputs for connecting VCR and other devices.
PROG OUT
Terminals that output fixed audio and NTSC composite 
video.
TO AUDIO AMP
Analog Audio Output to connect to an analog amplifier
Cooling fan
SERVICE 
ONLYHDMI
A/V IN
AUDIO INL
R
DIGITAL AUDIO OUT
ANT B
S-VIDEOVIDEO
1
2
COMPONENT 
VIDEO INPUTINPUT
1INPUT
2INPUT
3PROG
OUTTO 
AUDIO 
AMPAUDIO
Y
PB
PR



L
R
VIDEO
ANT A
Cable In
CableCARD TMINTERFACE
1
2
3
4
56789
11
10
1
2
3
4
5
6
7
8
9
10
11 
						

							8 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
Optional Equipment Connections
Note:The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection 
Follow this diagram when connecting your television to a
VCR only. 
Procedure
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Begin the video.
CableCARD™ Connection
This module allows you to tune digital and high definition
cable channels through the cable antenna.Consult your
Cable company on the availability of this module. 
Note:A Digital Cable Subscription is required. (refer to pg. 29)
Procedure
• Connect the Cable antenna to ANT A/Cable In input on
the back of the PTV.
• Insert the CableCARD module (upper side facing left)
into the CableCARD slot on the back of the PTV.
Notes:
• Left side is the upper side of the DCM cards.
• Do not insert a PCMCIA card into the CableCARD slot.
• Choose Cable mode for Antenna (A) in Input Setup.
• Follow the instructions on screen.   
Note:If you experience keyboard or remote control function
hang-up when using CableCARD module, unplug the
PTV and plug it back on and try the controls again. If this
condition still exists, please call Panasonic Customer
Call Center for further instructions.
Digital TV - Set-Top Box (DTV-STB) or DVD 
Connection
This television is capable of receiving 1080i, 480p, and 480i
DTV signals when connected to a DTV tuner set-top-box
(STB) or a DVD player. In order to view DTV programming, the
STB must be connected to the component video inputs
(Y,PB,PR) of the PTV. A DTV signal must be available in your
area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB or DVD player to
the back of your projection television.    
Note:There are two set of three video iacks, Y, PB, and PR.
Separate component color inputs provide luminance and
color separation. Use the L (left) and R (right) audio
inputs.
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not available.
A second VCR, Camcorder, a video disc player, video game
equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details
.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
L
R
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
1INPUT
2INPUT
3PROG
OUTTO AUDIO 
AMP
L
RAUDIO
VIDEO
Y
P
B
PR


TERMINALS ON BACK OF PROJECTION TELEVISION
L
R
VIDEO OUT
AUDIO OUTL
R
PLAY
STOP R
E
WFFVCR
ANT B
AUDIO IN
L
R
SERVICE
  ONLYHDMI
DIGITAL AUDIO  OUTAV IN ANT A
Cable In
CableCARD
 INTERFACE
TM
CABLES NOT SUPPLIED
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
1INPUT
2INPUT
3PROG
OUTTO AUDIO 
AMP
L
R
AUDIO
VIDEO
Y
P
B
PR


TERMINALS ON BACK OF PROJECTION TELEVISION
L
R
ANT B
AUDIO INL
R
SERVICE
  ONLY
HDMI
DIGITAL AUDIO  OUT
A/V IN
Incoming
cable 
signal
INSER
TT
HISEND
ANT A
Cable In
CableCARD
INTERFACE
CableCARDTM
TM
Left side (upper side) 
of card
LR
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
1INPUT
2INPUT
3PROG
OUTTO AUDIO 
AMP
LRAUDIO
VIDEO
Y
P
BPR


TERMINALS ON BACK OF PROJECTION TELEVISION
L
R
ANT B
AUDIO IN
L
R
SERVICE
  ONLYHDMI
DIGITAL AUDIO  OUT
R-AUDIO-L - VIDEO  S-VIDEONTSC OUTPUT
Y
PBPRMAIN
VIDEODIGITAL TV OUTPUT
L-AUDIO-R
TERMINALS ON BACK OF DTV-STB OR 
DVD PLAYERAV  I N
ANT A
Cable In
CableCARD
 INTERFACETM
CABLES NOT SUPPLIED
POWERW VOLUME XMENU OK T CHANNEL STV/VIDEO
S-VIDEO VIDEO 4 L - AUDIO - R
The ON/OFF indicator LED (red) will be lit when set is on. 
Video 4 location for PT-47WXD64
ON/OFF Indicator LED
POWER ON/OFF 
SD Slot
PC SlotPress this button to 
eject card from PC 
slot.