Panasonic Hd Plasma Display Th 85pf12 Operating Instructions

1/2
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[  VIDEO  ]
NOISE REDUCTION
OFFREFRESH RATE100 Hz
3 : 2 PULLDOWN
SIGNAL
OFF
[ 
Digital  ] 
NOISE REDUCTION
OFF
REFRESH RATE
100 HzH-FREQ.
V- F R E Q .kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT...

3D Y/C FILTER (NTSC) 
COLOR SYSTEM 
SIGNAL 
ON 
AUTO 
3 : 2 PULLDOWN 
Panasonic AUTO (4 : 3)  OFF 
4:3
[  VIDEO  ] 
3 : 2 PULLDOWN 
OFF 
XGA MODE
AUTO
52
3:2 PULLDOWN
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. 
(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or 
“Panasonic AUTO  (4:3)”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under...

REFRESH RATE100 Hzq
ADVANCED NR [ 
VIDEO  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[ 
Digital  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[ 
COMPONENT  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[ 
RGB  ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
()NOISE REDUCTION
OFF 
()NOISE REDUCTIONADVANCED
53
VIDEO NR:        Automatically reduces unwanted picture noise.
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR:       Reduces block noise when...

SYNC
SIGNAL[ 
RGB  ]
3 : 2 PULLDOWN
XGA MODE AUTO
OFF
AUTO
SYNC  AUTO 
SYNC  ON G 
SYNC  VBS 
H-FREQ.
V- F R E Q .kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60
H-FREQ.
V- F R E Q . kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT 1280×1024/60
3 : 2 PULLDOWN
SIGNAL
OFFSDI THROUGH OFF
[ 
Digital  ] 
NOISE REDUCTION
OFF
REFRESH RATE
100 Hz
54
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
SYNC
Setting RGB sync signal
Confi rm that the input is set to RGB INPUT...

Options 
Weekly Command Timer
1/3  
Initial INPUT Onscreen displayOn
Off
Off Off
0
0Maximum VOL level
Initial VOL levelOffINPUT lockOffButton lockOffRemocon User level
Memory lock
Options 
Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 
2/3 
 
3/3 Options 
O f f 
Off
Off
Clock Display
Rotate
Off
All AspectManual
Auto Setup
Slot2
Serial Slot Select Slot power 
Off
Power On Screen Delay
55
Item Adjustments
Weekly...

56
ItemAdjustments
INPUT lockOff 
 PC  INPUT1  INPUT2  INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 15).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be  fi xed as the value input in 
the single screen display mode.
• When a dual input terminal board is attached, A or B is displayed depending on the...

57
ItemAdjustments
Studio W/BOff:  Nullify all the settings adjusted.
On:  Sets the color temperature for TV studio.
Note:  Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu.
Studio Gain Sharpens the contrast for a better view when a part of the image is too \
light to see.
Off:  Disables “Studio Gain”.
On:  Enables “Studio Gain”.
Note:  This setting is valid only when the input signals are as follows:
    Component Video, RGB (analog), SDI, HDMI
Slot Power Off 
 Auto  On 
Off:  Power is...

Options 
On Weekly Command TimerOnscreen display 
1/3  
Weekly Command Timer 
Program1MondayOnFunction
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
yProgram3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 0102
1/8
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12  PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
20:00 
20:30 57 
58 
8/8   
22:00 59 --:-- 60 --:--...

Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
1/2
SIGNALPC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
SCREENSAVER
EXTENDED LIFE SETTINGS
59
This function allows you to reset the unit to the factory setting.
Shipping condition
1
4Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press for...

60
Troubleshooting
Before you call for service, determine the symptoms and make a few simpl\
e checks as shown below.
SymptomsChecks
PictureSound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo Sound
Volume
(Check whether the mute function has been activated on the remote contr\
ol.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote co\...