Panasonic Hd Plasma Display Th 85pf12 Operating Instructions

SERIAL 
6 7 8 9 
1 3 4 5 2 
11
Connections
SERIAL Terminals connection
Notes:
•  Use the RS-232C straight cable to connect the computer 
to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied  with this set.
The SERIAL terminal conforms to the RS-232C interface 
specifi  cation, so that the Plasma Display can be controlled 
by a computer which is connected to this terminal.
The computer will require software which allows the...

PC    SLOT1SLOT2SLOT3
PR/CR/R PB/CB/BY/GAUDIORLCOMPONENT/RGB IN
HDMI 
AV OUTHDMI 
AV OUT
SLOT3
PR/CR/R PB/CB/BY/GAUDIORL
COMPONENT/RGB IN
AUDIO  OUT 
Y 
,  P 
B ,    P R , 
OUT  P
R 
P B 
Y 
L 
R 
COMPONEN  T VIDEO OUT 
12
Connections
HDMI connection
This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and BNC Component Video Terminal 
Board (TY-42TM6A) as standard equipment.
HDMI cables
DVD player DVD player
[Pin assignments and signal names]
19 3 1 
4 2 18 
Note:...

13
Remote Control
SensorPower IndicatorRight side surface
Main Power 
On / Off Switch
Power ON / OFF
Connecting the plug to the Wall Outlet.
Press the Power switch on the Plasma Display to turn the 
set on: Power-On.Power Indicator: Green
Press the  button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby) 
Press the  button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the  switch on the...

PC
FULLNANODRIFT
English (UK) Deutsch 
Français   
Italiano 
 
Español 
 
ENGLISH (US) 
Русский  
OSD LANGUAGE
SET 
SELECT 
PRESENT TIME SETUP
PRESENT TIME OF DAY    MON  99:99
SET
PRESENT TIME OF DAY99:99DAY MON
PRESENT TIME SETUP
PRESENT TIME OF DAY    MON  99:99
SET
PRESENT TIME OF DAY10:00DAY TUE
LANDSCAPE
PORTRAIT
DISPLAY ORIENTATION
14
From the second time on, the below screen is displayed for a while (set\
ting condition is an example). When  fi rst switching on the unit
Following screen will be...

INPUT MENU
VOL
ENTER /
+/
-/
15
Selecting the input signal
Select the input signals to be connected by installing the optional Terminal Boards.
Press to select the input signal to be played back from the 
equipment which has been connected to the Plasma Display.
Input signals will change as follows:
Notes:
•  Selecting is also possible by pressing the INPUT button on the unit.
•  Input terminal will not be selected if the terminal board is not install\
ed into the SLOT.
•  Select to match the signals...

INPUT MENU
VOL
ENTER/
+/
-/
16
Basic Controls
Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is displayed:
“+” : press to move the cursor up 
“–” : press to move the cursor down
(see page 23)
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu 
screen will switch. (see page 23)Normal Viewing PICTURE SETUP SOUND POS. /SIZE
Main Power On / Off Switch
Enter / Aspect button 
(see page 18, 23)
INPUT button
(INPUT signal selection)
(see page 15)
Right side 
surface
Power...

17
Basic Controls
Standby (ON / OFF) button
The Plasma Display must fi rst be plugged into the wall 
outlet and turned on at the power switch (see page 13).
Press ON to turn the Plasma Display On, from Standby 
mode. Press OFF to turn the Plasma Display Off to 
Standby mode.
SET UP button  (see page 23)
SOUND button  (see page 35)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” 
input mode selection button to select 
the INPUT mode. (see page 15)
This button is used to switch directly 
to INPUT...

18
[from the unit]
VOL 
ENTER/ 
+ / 
- / 
Right side surface
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its ma\
ximum size, including wide screen cinema format 
picture.Press repeatedly to move through the aspect options:
For details about the aspect mode, please see “List of Aspect Modes” (page 61). 
Panasonic AUTO
The display will automatically become enlarged (depending on the pictur\
e source), allowing you to view the picture at its maximum size.
Panasonic AUTO...

19
ASPECT Controls
You can display two pictures, such as a video image and computer image, i\
n a two-screen display. (Use the remote control 
for this operation. It cannot be performed with the buttons on the main \
unit.)
MULTI PIP SETUP
Set the functions and mode for two-screen display in “MULTI PIP SETUP” in the SET UP menu.
(see page 47)
Selecting the Display Mode
 Each time this button is pressed, the screen changes.
 
Note:
The screen changes in the same way when “DISPLAY MODE” in “MULTI PIP...

20
MULTI PIPMULTI PIP
Swapping Screens
 Each time this button is pressed, the main screen and sub screen are swa\
pped.
Two screens
(P AND  P)
Main screen Sub screen
Two screens(P OUT P) Two screens
(P IN P)
During Blend PIP (Composite Screen Function) :
A composite picture is displayed with the sub screen positioned over the \
main screen. For example, text data such as a 
computer image can be displayed as a caption over a movie or still image\
.
One screen FULLP IN P
Transparent Function and Insertion...