Panasonic Hd Plasma Display Th 85pf12 Operating Instructions
Here you can view all the pages of manual Panasonic Hd Plasma Display Th 85pf12 Operating Instructions . The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 41
41 Reduces screen image retention CUSTOM SETTINGS Set the individual “Image Retention Reduction” menu. 1Select “CUSTOM SETTINGS”. EXPRESS SETTINGSCUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS1 select 2 access 2To set each menu to the recommended setting: Select “RECOMMENDED SETTINGS”. PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNAMIC SIDE BAR ADJUST NANODRIFT SAVER LOCK SETTINGSPEAK LIMIT BRIGHT HIGH MID UNLOCK APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS OFF 30 RECOMMENDED SETTINGS 1 select 2 set Each...
Page 42
![Page 42
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
POWER SAVE
SET UP
42
Reduces power consumption
Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On
Off
Press to exit from SET UP.
• POWER SAVE:
When this function is turned ON, luminous level of the Plasma Display is\
suppressed, so
power consumption is...](http://img.usermanuals.tech/thumb/58/71587/w300_th-85pf12_en_om_d-41.png "Page 42
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
POWER SAVE
SET UP
42
Reduces power consumption
Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On
Off
Press to exit from SET UP.
• POWER SAVE:
When this function is turned ON, luminous level of the Plasma Display is\
suppressed, so
power consumption is...")
1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER EXTENDED LIFE SETTINGS POWER SAVE SET UP 42 Reduces power consumption Press to select “POWER SAVE” “STANDBY SAVE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON” or “OFF”. On Off Press to exit from SET UP. • POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is\ suppressed, so power consumption is...
Page 43
1/2 PC OFF STANDBY SAVE OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER EXTENDED LIFE SETTINGS POWER SAVE SET UP 1/2 SIGNAL PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP SCREENSAVER EXTENDED LIFE SETTINGS 43 Press to select INPUT LABEL. Press to change the INPUT LABEL. This function can change the label of the Input signal...
Page 44
![Page 44
44
Sets the fan control and the display style of on-screen menu for vertica\
l installation.Press to display the SET UP menu.
Press to select DISPLAY ORIENTATION.
Press to select “LANDSCAPE” or “PORTRAIT”.
Press to exit from adjust mode
1
2
3
Notes:
• If the display is installed vertically, the power switch should be located at the bottom.
• Fan control will be switched when turning on the unit next time.
LANDSCAPE PORTRAIT
Fan control for horizontal installation. Fan control for vertical installation....](http://img.usermanuals.tech/thumb/58/71587/w300_th-85pf12_en_om_d-43.png "Page 44
44
Sets the fan control and the display style of on-screen menu for vertica\
l installation.Press to display the SET UP menu.
Press to select DISPLAY ORIENTATION.
Press to select “LANDSCAPE” or “PORTRAIT”.
Press to exit from adjust mode
1
2
3
Notes:
• If the display is installed vertically, the power switch should be located at the bottom.
• Fan control will be switched when turning on the unit next time.
LANDSCAPE PORTRAIT
Fan control for horizontal installation. Fan control for vertical installation....")
44 Sets the fan control and the display style of on-screen menu for vertica\ l installation.Press to display the SET UP menu. Press to select DISPLAY ORIENTATION. Press to select “LANDSCAPE” or “PORTRAIT”. Press to exit from adjust mode 1 2 3 Notes: • If the display is installed vertically, the power switch should be located at the bottom. • Fan control will be switched when turning on the unit next time. LANDSCAPE PORTRAIT Fan control for horizontal installation. Fan control for vertical installation....
Page 45
![Page 45
2/2 SET UP
MULTI DISPLAY SETUPSET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
MULTI PIP SETUPPORTRAIT SETUP
× 2
MULTI DISPLAY SETUP
HORIZONTAL SCALE OFF
A1
OFF
AI-SYNCHRONIZATION VERTICAL SCALE
LOCATION OFF
SEAM HIDES VIDEO × 2
MULTI DISPLAY SETUP
45
By lining up Plasma Displays in groups, for example, as illustrated belo\
w, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a \
Display number to determine...](http://img.usermanuals.tech/thumb/58/71587/w300_th-85pf12_en_om_d-44.png "Page 45
2/2 SET UP
MULTI DISPLAY SETUPSET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
MULTI PIP SETUPPORTRAIT SETUP
× 2
MULTI DISPLAY SETUP
HORIZONTAL SCALE OFF
A1
OFF
AI-SYNCHRONIZATION VERTICAL SCALE
LOCATION OFF
SEAM HIDES VIDEO × 2
MULTI DISPLAY SETUP
45
By lining up Plasma Displays in groups, for example, as illustrated belo\
w, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a \
Display number to determine...")
2/2 SET UP MULTI DISPLAY SETUPSET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATIONLANDSCAPE MULTI PIP SETUPPORTRAIT SETUP × 2 MULTI DISPLAY SETUP HORIZONTAL SCALE OFF A1 OFF AI-SYNCHRONIZATION VERTICAL SCALE LOCATION OFF SEAM HIDES VIDEO × 2 MULTI DISPLAY SETUP 45 By lining up Plasma Displays in groups, for example, as illustrated belo\ w, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a \ Display number to determine...
Page 46
![Page 46
46
You can set the remote control ID when you want to use this remote contro\
l on one of several different displays.
SET UP for MULTI DISPLAY
1
2
3Switch to on the right side.
Press the
button on the remote control.
Press one of
- , for the tens digit setting.
Press one of
- , for the units digit setting. 4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become...](http://img.usermanuals.tech/thumb/58/71587/w300_th-85pf12_en_om_d-45.png "Page 46
46
You can set the remote control ID when you want to use this remote contro\
l on one of several different displays.
SET UP for MULTI DISPLAY
1
2
3Switch to on the right side.
Press the
button on the remote control.
Press one of
- , for the tens digit setting.
Press one of
- , for the units digit setting. 4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become...")
46 You can set the remote control ID when you want to use this remote contro\ l on one of several different displays. SET UP for MULTI DISPLAY 1 2 3Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes: • The numbers in 2, 3 and 4 should be set up quickly. • Adjustable ID number range is 0 - 99. • If a number button is pressed more than two times, the fi rst two numbers become...
Page 47
— MULTI PIP DISPLAY MODE BLEND PIP OFF 1 INSERT LEVEL TRANSPARENCY INSERT 0 % TRANSPARENCY LEVELOFF MULTI PIP SETUP 2/2 SET UP MULTI DISPLAY SETUP SET UP TIMERMULTI PIP SETUPPORTRAIT SETUP 47 MULTI PIP SETUP Set the two-screen display function that is activated when is pressed. Press to select the MULTI PIP SETUP. Press to display the “MULTI PIP SETUP” menu. Press to display the SET UP menu. 1 2 3 Press to select the menu to adjust. Press to adjust the menu. Sub Screen Insertion (During BLEND PIP) 1...
Page 48
![Page 48
48
Divide an input image into 3 parts, and display one of them to a plasma \
display which is set vertically. The image will be enlarged 3
times and rotated 90-degree.
SET UP for PORTRAIT
(Example)
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to...](http://img.usermanuals.tech/thumb/58/71587/w300_th-85pf12_en_om_d-47.png "Page 48
48
Divide an input image into 3 parts, and display one of them to a plasma \
display which is set vertically. The image will be enlarged 3
times and rotated 90-degree.
SET UP for PORTRAIT
(Example)
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to...")
48 Divide an input image into 3 parts, and display one of them to a plasma \ display which is set vertically. The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP. Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP. Press to select “ON” or “OFF”. Note: If you set PORTRAIT SETUP to ON, MULTI DISPLAY SETUP will be unavailable. Press to select SEAM HIDES VIDEO. Press to...
Page 49
![Page 49
49
SET UP for PORTRAIT
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
• For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed.
HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p\
• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i
• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.
Press to exit from adjust mode.
7 6
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”.
Adjust to equalize the...](http://img.usermanuals.tech/thumb/58/71587/w300_th-85pf12_en_om_d-48.png "Page 49
49
SET UP for PORTRAIT
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
• For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed.
HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p\
• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i
• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.
Press to exit from adjust mode.
7 6
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”.
Adjust to equalize the...")
49 SET UP for PORTRAIT Press to select VIEWING AREA or LOCATION. Press to select each function. Notes: • For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed. HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p\ • 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i • When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”. Press to exit from adjust mode. 7 6 Press to select AI-SYNCHRONIZATION. Press to select “OFF” , “ON”. Adjust to equalize the...
Page 50
1/2 PC OFF STANDBY SAVE OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER EXTENDED LIFE SETTINGS POWER SAVE SET UP 1/2 PC OFF STANDBY SAVE OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) YUV/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP EXTENDED LIFE SETTINGS 50 SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT /...