Panasonic Hd Integrated Camera Aw He60h Vol2 Operating Instructions

101
Limiters
This unit comes wit\eh settings (referred to as “limiters”) that 
restrict the panning and\e tilting movement ranges.
Depending on where th\ee unit has been inst\ealled, a subject 
which the user does \enot wish to be shot\e may be present in 
the movement ranges.
In a case like this, the unit’s shooting range can be limited \e
by setting the limite\ers at the positions\e just before the subject 
which the user does \enot wish to be shot\e.
The positions of four limiters — namel\ey, the...

102
Setting/releasing th\pe limiters
p
w Basic limiter opera\ptions
1	Press the [\bENU] button.
Tap the button (rather than pressing \eit). 
When it is pressed f\eor 2 seconds, the camera menu will 
appear.
If this happens, press the [M\fNU] b\eutton again for 
2 seconds to clear the\e camera menu.
Then start again from step 
1.
2	Press the [], [], [] or [] button for 
2 seconds while holdi\png down the [PRESET] 
button.
The limiter for the upper limit, l\eower limit, left limit \eor right 
limit is...

103
Setting/releasing th\pe limiters(continued)
p
w Releasing the limit\pers
The limiter position\es that are set can \ebe released by following 
the steps below.
When the position is\e released, the tally l\eamp blinks twice.
1	Press one of the [\pCA\b1] to [CA\b4] buttons to 
select the unit.
2	Release the limiter\ps b\f taking the steps \pbelow.
p
 Releasing the upper \plimit position of t\phe 
movement range
Perform the steps in “Basic limiter operations”.
(Press the [M\fNU] button quickly and then...

104
Safe mode
p
w Concerning the saf\pe mode
The unit is equipped \ewith a safe mode for protection from \e
damage.
When a safe mode is established, some or all o\ef operations 
will no longer be acc\eepted.
Trouble‑triggered safe mode
When the unit has d\eetected trouble, the “trouble-triggered 
safe mode” is established: In this mode, the unit’s 
functions are shut \edown and then the uni\et is returned 
to its regular stat\eus in about 30 seconds after it ha\es 
been started up again or the \einitial...

105
Notes on Windows® 7
When using Microsof\et® Windows® 7, symptoms described in this docume\ent may happen.
If any of them occurred,\e follow the instructions to solve each problem.
This document descr\eibes solutions for administrators.
   If necessary, install the viewer software.
Refer to the Operating Instructions of each device for details on how to install the vie\ewer software.
    Descriptions in this doc\eument are based on o\eperation check by Panasonic Corporation. 
Possible symptoms may...

106
Notes on Windows® 7(continued)
p
w Precautions when u\psing Windows 7
S\fmptom 1
p
 When accessing the w\eeb browser, the following message is dis\eplayed on the information bar.  
“Pop-up blocked. To see this pop-up or \eadditional options \eclick here…”
Solution
\bdd the IP address o\ef the product to “Trusted sites”, and pe\erform the security setting.
1	 Start up the web browser, and click “Internet Options” on the Tools menu.
2	 Click the [Security] tab. Then, select the “Trusted sites”....

107
Notes on Windows® 7(continued)
S\fmptom 2
p
 \fasy IP Setup Software does not display the detected IP ad\edress.
Solution
Check the firewall settings. If a firewall is activated, set the web browser or \fasy IP Setu\ep Software to the “\bllow a program 
through Windows Firewall” setting.
1	Open the control pane\el, and click “System and Security”.
2	 Click “\bllow a program through Windows Firewall” of “Windows 
Firewall”. (Refer to the screenshot\e.)
3	Select the “Internet \fxplorer” or...

108
Notes on Windows® 7(continued)
S\fmptom 4
p
 The screens of the a\edministrator console or the \ewindows of the browser are not displayed properly. (Refer to the screenshot\e.)
Solution
Check the character size of the screenshot \eby clicking “Display” of “Personalize”.
If the character size is set to “Larger scale”, set it to “Default scale”.
1	Right-click on the desktop.
2	 Click “Personalize”.
3	 Click “Display”.
4	 Select “Small-100% (Default scale)” for the character size 
of the screenshot,...

109
Notes on Windows® 7(continued)
S\fmptom 5
p
 Screen is deformed. / When activating the compatibi\elity view, part of the screen is n\eot displayed or a pop-up windo\ew appears 
to say that the screen is\e not displayed again.
Solution
Check “Display all websites in Compatibi\elity View” on the “Compatibility View Settings” window.
1	Start up the web browser, and click “Tools” on the menu bar.
2	 Click “Compatibility View Settings”.
3	 Check “Display all websites in Compatibi\elity View”, and click...

110
Notes on Windows® 7(continued)
S\fmptom 8
p
 Software upgrade is impossible even when selecting a f\eile from the dialog \ebox displayed from the window or tab to upgrade 
the software.
Solution
Perform the custom level setting on the “Security Settings” window.
1	Start up the web browser, and click “Tools” on the menu bar.
2	 Select “Internet Options”.
3	 Click the “Security” on the displayed window, and click the [Custom Level…] 
button.
4	 Click “Include local direct\eory path when uploadin\eg...