Panasonic Hd Convertible Camera Aw He870n Operating Instructions
Have a look at the manual Panasonic Hd Convertible Camera Aw He870n Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
- 91 - Setting to initial set (Factory presets) User ModeItemUser Brightness Set Picture Level 0 Light PEAK/AVG 0 Light Area Top Cut Shutter Mode Step Step/Synchro Off Gain 0dB AGC Max Gain --- Pedestal 0 Color Set Chroma Level +2 White Bal AWB A ATW Speed --- Painting R Gain 0 B Gain 0 R Pedestal 0 B Pedestal 0 HD Detail Set 1/2 Detail High H Detail Level H 30 V Detail Level H 23 H Detail Level L 18 V Detail Level L 15 Detail Band 4 Noise Suppress 5 Level Dependent 10% Dark Detail 0 HD Detail Set 2/2 Chroma Detail 0 Clean DNR Off Flesh Noise Sup. Off Precision Detail Off Item User SD Detail Set 1/2 Detail High H Detail Level H 16 V Detail Level H 3 H Detail Level L 13 V Detail Level L 2 Detail Band 4 Noise Suppress 3 Level Dependent 10% Dark Detail 0 SD Detail Set 2/2 Chroma Detail 0 Clean DNR Off Flesh Noise Sup. Off Color Matrix Set Matrix(R-G) 0 Matrix(R-B) 0 Matrix(G-R) 0 Matrix(G-B) 0 Matrix(B-G) 0 Matrix(B-R) 0 Color Correction 1/3 B_Mg Gain 0 B_Mg Phase 0 Mg Gain +27 Mg Phase 0 Mg_R Gain 0 Mg_R Phase 0 R Gain +15 R Phase 0
- 92 - Setting to initial set (Factory presets) ItemUser Color Correction 2/3 R_YI Gain 0 R_YI Phase 0 YI Gain +18 YI Phase +6 YI_G Gain 0 YI_G Phase 0 G Gain +30 G Phase +112 Color Correction 3/3 G_Cy Gain 0 G_Cy Phase 0 Cy Gain +44 Cy Phase –15 Cy_B Gain 0 Cy_B Phase 0 B Gain –20 B Phase +36 G/L Set* (*Items common to all scenes) H Phase 0 SC Coarse 90deg SC Fine 0 H Phase,SC Fine Step 1 Other Set 1 Gamma 0.45 Knee Point 88% White Clip 110% Flare R 0 Flare G 0 Flare B 0 Black Stretch Off SD 2D LPF Off EBU Matrix Set Off Item User Other Set 2* (*Items common to all scenes) Format 1080i Downconv. Mode Squeeze Component Y/Pb/Pr Status Off Character Mix Component On Composite On Option On Composite,Y/C Setup On
- 93 - Troubleshooting Operation SymptomCause and remedial action Reference pages No power When the pan-tilt head is not being used Are the DC cable provided with the unit and the designated AC adapter connected? Has the POWER switch of the AC adapter been set to the ON position? P.18, P.24 to 26 When the pan-tilt head and controller are being used Has all the equipment been connected properly? Has the power of the pan-tilt head and controller been turned on? Refer to the Operating Instructions of the pan-tilt head or the controller. P.27 to 38 Cannot operate using the controller Has the unit’s power been turned on? If the unit’s power indicator LED is off, it means that no power is being supplied to the unit. P.18 Is the unit connected to the pan-tilt head and controller properly? Has the power of the pan-tilt head and controller been turned on? Refer to the Operating Instructions of the pan-tilt head or the controller. P.17, P.24 to 26 Has the unit or the system connected to the unit been selected correctly using the CONTROL button on the controller? Refer to the Operating Instructions of the controller. P.39 to 48
- 94 - SymptomCause and remedial action Reference pages Cannot operate using the controller It may be necessary to upgrade the version of the controller so that the controller will support the unit. Consult with your dealer. — When the AW-RP400 pan-tilt control panel and the AW-CB400 remote operation panel are used in combination, a setting that prohibits the operation of one of these units may have been selected. Refer to the Operating Instructions of the controller. — Cannot operate the lens Check that the unit and lens have been connected properly. Check that the iris selector switch on the lens is set to AUTO. P.19, P.52 Is the designated lens being used? P.19 Cannot display the menus Has OFF been set for the character output selection of the output connected to the monitor? Check the character output selection. Even if OFF is selected, characters are displayed in all outputs for up to one minute after operation has been started. P.69, P.85 When the pan-tilt head and controller are being used Is the unit connected to the pan-tilt head and controller properly? Refer to the Operating Instructions of the pan-tilt head or the controller. P.17, P.24 to 26 Troubleshooting
- 95 - Troubleshooting Video SymptomCause and remedial action Reference pages The camera’s images are not displayed or they are disturbed Is the unit connected to the pan-tilt head and controller properly? Refer to the Operating Instructions of the pan-tilt head or the controller. P.27 to 38 Has the power of the connected equipment been turned on? Refer to the Operating Instructions of the pan-tilt head or the controller. — In the case of a system configuration (using a switcher or other unit) with which the images are also switched when the camera to be operated is selected, has the unit — rather than another camera — been selected? — Has the video output been selected properly? Check the video output format, component output selection, and other settings. P.67 to 68 P.83 to 84 Is the camera being used in conditions under which its use is prohibited? Check the precautions for installation and the camera’s specifications. P.12, P.99 When the genlock function is being used Check that the genlock sync signals are being input properly. Check that the horizontal phase and color phase have been set correctly. P.26, P.57 to 59
- 96 - SymptomCause and remedial action Reference pages Something is wrong with the coloring of the pictures Have the white balance and black balance been adjusted? Adjust the white balance and black balance. The automatic tracking white balance setting (ATW) function may also be selected. P.53 to 55 Have the color matrix settings or color correction settings been changed? Review the color matrix settings or color correction settings. P.80 to 81, P.89 When the genlock function is being used by the composite video signal output Check that the horizontal phase and color phase have been set correctly. P.26, P.57 to 59 The pictures are too light or too dark When the controller is being used Either set the iris to auto or set it to manual and adjust the iris manually. P.39 to 48 Check the connections and terminations of the video cables. — Signal attenuation may cause the images to become dark if the video cables are too long. Connect a commercially available cable compensator. — Check that the unit and lens have been connected properly. Check that the iris selector switch on the lens is set to AUTO. P.19, P.52 Is the designated lens being used? P.19 Troubleshooting
- 97 - Troubleshooting SymptomCause and remedial action Reference pages Multiple color bands (color bars) are displayed Switch to the camera picture. P.16, P.39 to 48 The controller’s H/F and OPTION indicators flash The OPERATE LED on the CB400 flashes Restart the unit, and check that “Fan Error” is displayed. The cooling fan inside the unit has reached the end of its service life or it has failed. If the camera would be kept using with displaying “Fan Error”, it may cause malfunctioning. Ask your dealer to replace it. P.9, P.39 to 48 “Fan Error” is displayed when operation is started The cooling fan inside the unit has reached the end of its service life or it has failed. If the camera would be kept using with displaying “Fan Error”, it may cause malfunctioning. Ask your dealer to replace it. “Fan Error” is displayed in all video outputs regardless of the AWB/ABB operation status display setting or character output selection. To clear the “Fan Error” display, display the menu screen and close the screen. P. 9 The AWC or ABC button lights when the controller’s AWC or ABC button is pressed The AWB or ABB adjustment was not completed successfully. Review the shooting conditions, and try again. The reason why the adjustment was not completed successfully can be checked when the AWB/ABB operation status display (Status) is set to ON. P.53, P.54 P.55, P.68
- 98 - Appearance Unit: inch (mm) AW-HE870 HD Convertible CameraDEFINITIONHIGH 3-1/4 (83) 6-3/4 (171) 4-1/8 (104.5) 1/4 (12) 3/8 (9) 3-1/16 (77) 1-5/16 (34)10 11/16 (17.5)
- 99 - Specifications Source voltage: DC 12 V Power consumption: 18.5 W indicates safety information. Optical system: Dichroic prism optical system, F1.4 Pickup device: 2/3 Interline wide CCD Synchronization system: Internal synchronization, External synchronization: BB (BNC 1, Dsub 50P 1) Video output: Y/Pb/Pr Y: 1.0 Vp-p/75 Pb/Pr: 0.7 Vp-p/75 (Dsub 50P 1) Switched by menu RGB 1.0 Vp-p/75 (Dsub 50P 1) VIDEO OUT 1.0 Vp-p/75 (BNC 1, Dsub 50P 1) Continuous output Y/C Y: 1.0 Vp-p/75 C: 0.286 Vp-p/75 (burst) (Dsub 50P 1) Y/Pb/Pr Y: 1.0 Vp-p/75 Pb/Pr: 0.7 Vp-p/75 (Dsub 50P 1) Switched by menu RGB 1.0 Vp-p/75 (Dsub 50P 1) Y/C Y: 1.0 Vp-p/75 C: 0.286 Vp-p/75 (burst) (Dsub 50P 1) Standard illumination, color temperature: 2,000 lx (F10, 3200K) Registration: 0.05 % (Entire screen, excluding effects of lens) Geometric distortion: 0 % (Entire screen, excluding effects of lens) Contour correction: Horizontal, vertical (2H)
- 100 - White balance: AWB A, AWB B (R/B painting), ATW, 3200K/5600K preset Black balance: Auto (R/B painting) Chroma amount variability: 7 levels variability Encoding system: Y, R-Y, B-Y Gain selection: –6 to 18 dB in step, AGC Electronic shutter speed: 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, ELC, Synchro scan (61.19 Hz to 1466 Hz) Color bars: SMPTE Video output format setting: 480i, 720p, 1080i Lens mount: 2/3 bayonet mount Lens diaphragm: Auto, Manual (manual available only when using the remote control) Selectors: MENU ENTER/AWB (AWB: when menu screen is not displayed) UP/ABB (ABB: when menu screen is not displayed) DOWN/BAR (BAR: when menu screen is not displayed) Input/Output connectors: VIDEO OUT: BNC connector G/L IN: BNC connector IRIS: 12P round connector DC 12 V IN: DC connector I/F REMOTE: 50P Dsub connector Indicator: Green LED lights: POWER ON Specifications